similar to: quantum

Hi, Following 2 vulnerabilities were detected in VA scan required for PCI compliance: 1. SSL Weak Cipher Suites Supported 2. SSL Medium Strength Cipher Suites Supported I'm using CentOS 5.8 with open ssl version "openssl-0.9.8e-22.el5_8.4". Any idea how to get rid of this? Thanks, Anumeha

hi. When I execute follow class setting qdisc 1:0 root htb default 2 parent 1:0 classid 1:1 htb rate 10Mbit ceil 10Mbit parent 1:1 classid 1:2 htb rate 10kbit ceil 100Mbit HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change. <7>htb*g j=1014xxxxx HTB: quantum of class 10001 is big. Consider r2q change.

Salut lartc (lartc@mailman.ds9a.nl), 18:12:52 kernel HTB init, kernel part version 3.10 18:12:52 kernel HTB: quantum of class 100001 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100002 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100003 is small. Consider r2q change. 18:12:52 kernel HTB: quantum of class 100004 is small. Consider r2q change.

My gateway is showing these messages: htb*g j=4929 htb*r7 m=0 htb*r6 m=0 htb*r5 m=0 htb*r4 m=0 htb*r3 m=0 htb*r2 m=0 htb*r1 m=0 htb*r0 m=0 HTB: quantum of class 10001 is big. Consider r2q change. What does it means ? Thanks, Luciano Lima _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hi, when we add a class we get an error "HTB Quantum too small,or too big" i read in docum.org that we need to set the quantun value which should be >1500 and <60000. but i need to add classes with diff type of rates. eg : Min : 32 kbit and Max : 512 kbit. now in this case how do i set my quantum value which satifies all types of rates. Pls let me know,This is very urgent for

Hey all, When I run my scripts to manage my ungodly slow school connection, I get messages about the quantum size being small and suggesting a r2q change. What is this all about, and should I do anything? my link is effectively 45kBps and I have it set to limit to 42kBps. Thanks, Jay _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Dear All, My query is: Do we always need to use perl = TRUE option when doing ignore.case=TRUE? A small example : my_text = "RECOVERY OFFICER-II\nDEBTS RECOVERY TRIBUNAL-III\n RC No. 162/2015\nSBI VS RAMESH GUPTA.\n Dated: 01.03.2016 Item no.01\n Present: Ms. Sonakshi, the proxy counsel for Ms. Usha Singh, the counsel for ARCIL.\n None for the CDs.\n

4.0.6 with 3.6.12 file server Hi Ordinary users can connect fine: smbclient //oliva/users -Usteve2 Enter steve2's password: Domain=[HH3] OS=[Unix] Server=[Samba 3.6.9] smb: \> log: schannel_fetch_session_key_tdb: restored schannel info key SECRETS/SCHANNEL/OLIVA schannel_store_session_key_tdb: stored schannel info with key SECRETS/SCHANNEL/OLIVA auth_check_password_send: Checking

hello, i have a config that is with a large domain of rate, from 2kb to 40Mb and i have some problems with i don''t know how to deal with. so here are some classes 2 with q=1000, one with q 200000 and one with q=6400, all have been calculated by htb, in the code i speficien just rate,ceil, no quantum, no r2q, no bursts ($tc class add $IF_INT parent 1:2 classid 1:21 htb rate

tl;dr version: 3.0 produces “bio too big” dmesg entries and silently corrupts data in “meta-raid1/data-single” configurations on disks with different max_hw_sectors, where 2.6.38 worked fine. tl;dr side-issue: on-line removal of partitions holding “single” data attempts to create raid0 (rather than single) block groups. If it can''t get enough room for raid0 over all remaining disks, it

Hello! One simple question regaring htb2->htb3 way. I''m using 2.4.25 kernel with tc3 from Devik''s site, RH9. My data flow is about 100Mbit duplex and is subject to grow, so I''m creating root class with 200Mbit rate, with r2q=10, quantum = rate/r2q, and 1500 < quantum < 200000 (sch_htb.c) with such r2q my default shaping window will be from 120Kbit to 16Mbit,

Hi there, I have a somewhat wide experience with samba. I've succesfully installed it as a client as well as a PDC on Windows networks. The last time, however, there has been an issue with the win9x stations. I've setup the Samba server over Linux to act as a PDC for the domain. I use dhcp to assign the network configuration to the hosts, and the only protocol installed on them is

Hello Stef, I am working on a Bandwidth management project as part of my college curriculum.I am running TCNG 10-b but I am not able to classify packets based on MAC address using tcng, so I am running tc commands in /tcng/bin and they are working. But is there a way out to classify packets based on MAC address using TCNG. And, I am successful in throttling down the Bandwidth to 8kbit

For quite a while, I''ve experienced oddities with snapshotted Firefox _CACHE_00?_ files, whose checksums (and contents) would change after the btrfs snapshot was taken, and would even change depending on how the file was brought to memory (e.g., rsyncing it to backup storage vs checking its md5sum before or after the rsync). This only affected these cache files, so I didn''t give

Hello, I''m using kernel 3.1.0 and I have both / and /home as btrfs. I used suspend to ram quite often and never had a problem, but yesterday I''ve suspended to get into a plane and when I resumed my /home was all about input/output errors. Reboot did not help either. My root (/) did not suffer any problems. Today I''ve upgraded btrfs-progs to latest GIT and tried scrub

Bernard Łabno wrote: > Hello, > What does this line mean : > > HTB: quantum of class 10200 is small. Consider r2q change. > > > And how should I fix it ? I have dsl 1mb connection and 2 cards > (realtek-8139C and realtek-8100B/8139D) > > Could the above line cause this ? : > NETDEV WATCHDOG: eth0: transmit timed out > eth0: Transmit timeout, status 0c 0005

Hi, I have this message in my syslog: HTB: quantum of class 10001 is big. Consider r2q change. I don''t know why it''s there. I think all my setup is right. I am shaping traffic from my web server. It lives at three IP addresses, first is fast (and most important - aaa.bbb.ccc.1), second slower (aaa.bbb.ccc.2), third slowest (aaa.bbb.ccc.3). Total bandwidth is 2700kBps. Other

Ronny Blomme <Ronny.Blomme@elis.rug.ac.be> writes: > The default configuration for smbclient in samba-1.9.18p8 is to send > verbose output to stdout. The output sent to tape is a mix of this > verbose output and the tar-file => corrupt tar file on tape The attached patch for SAMBA fixes this problem, preventing log messages from being printed to stdout if the tar-file is

Has anyone noticed that there appears to be a few problems with regards to Samba and in particular the usage of smbclient, which can do one of the following : 1) Complete & udder death of the NT networking subsystem (which requires a reboot to cure) 2) smbclient appears to lose its connection with the host being contacted and eventually needs to be killed. I'm not too sure how

Hi Folks, I want to use samba and amanda to backup NT/win file system. I downloaded the latest version of Samba and trying to install on bsdi4.0 and it complains that the OS is a "trapdoor" OS and will not work propperly. I installed it anyway and I can connect to NT no problem but when I connect it back to the unix box, it complains about "Bad password - name/password in a Tree