similar to: multicast over GRE tunnel

Hi, I have a client connected to the ''net through 3 ISP''s. Have set up a Linux box to do routing and load sharing for the 3 connections. A fourth interface is connected to the LAN with private IP addresses. Am using iptables to SNAT traffic to the appropriate IP depending on the interface the packet gets routed onto. The setup looks something like this: Interface IP

Hi, I got a problem similar to this one (http://mailman.ds9a.nl/pipermail/lartc/2005q4/017614.html), GRE tunnel can forward normal IP packets such as ICMP but failed to tunnel multicast traffics. Here''s the setup: 192.168.20.0/24 LAN-A--------------RtrA-------------RtrB--------------LAN-B 192.168.50.0/24 192.168.60.0/24 RtrA

Hi, I have the following setup. Two linux systems with two [test] external interfaces encrypted with ipsec [transport]. Two gre tunnels that pass 10.200.0.0/24 and 10.200.1.0/24 network traffic. Testing the balanced tunnels I would setup iptraf on one and ping from the other. The results would be as expected; traffic would be split between the two interfaces. Testing with an ftp transfer of

Hello everyone, I have a problem regarding gre tunneling, I have two linux box both of them has a private network and the linux A is connected to the internet via wireless radio and the other linux B is connected to the internet via lease line. Here is the setup of my two linux box Linux A eth0 = 203.189.x.1 (internet) eth1 = 192.168.1.1 (going to hub private network) Linux B eth0 = 205.198.x.1

Hi, I have the following setup. Two linux systems with two [test] external interfaces encrypted with ipsec [transport]. Two gre tunnels that pass 10.200.0.0/24 and 10.200.1.0/24 network traffic. Testing the balanced tunnels I would setup iptraf on one and ping from the other. The results would be as expected; traffic would be split between the two interfaces. Testing with an ftp transfer of

Hi, I have a problem with GRE tunneling. I read Advanced-Routing HOWTO about this and I did all as is written in this documentation. Even the same example is here which I need for my project. I want create (by means of GRE tunneling or IP in IP tunneling) virtual private network VPN - in first phase without IPsec in other phase with IPsec. I have two local networks distant apart with two routers.

Hi, I have the following setup. Two linux systems with two [test] external interfaces encrypted with ipsec [transport]. Two gre tunnels that pass 10.200.0.0/24 and 10.200.1.0/24 network traffic. Testing the balanced tunnels I would setup iptraf on one and ping from the other. The results would be as expected; traffic would be split between the two interfaces. Testing with an ftp transfer of

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I've got this strange thing: I setup a openvpn link between two openwrts. NetA: 192.168.2.0/24 NetB: 192.168.0.0/24 In netA there is a mail server + DNS: 192.168.2.44, with domain name branch.abc.com In netB there is a mail server + DNS: 192.168.0.44, with domain name abc.com I setup both DNS server to be a slave server of each other

Martin, If I understand whay you are suggesting, there is a problem in your design: It will only work if you use Hide NAT. The problem is that the ip_src == IP0 rule is wrong: The ip_src is not changed by the router and it is not equal to the IP of any of the machine interfaces. Can you think of a solution that will work in the following reasonabl scenario: Lets say I have two T1 internet

Hello I have 2 gluster servers (10.0.1.11 and 10.0.1.12) and 1 client(10.0.1.1) on same lan. I added a direct network link between the 2 servers (10.10.10.11 and 10.10.10.12). From 1 gluster server : $ sudo gluster peer probe 10.10.10.12 $ sudo gluster peer status Number of Peers: 1 Hostname: 10.10.10.12 Uuid: 467b70c7-c5b5-48c3-9026-4a2b3eadc5b8 State: Peer in Cluster (Connected) $ sudo

I have a backup server (Linux Debian 3.1) that connects to several Windows 2000 and 2003 servers shares with smbmount 3.0.14a. This is how I mount the shares: smbmount "\\\\win2000\\inetpubd" /mnt/win2000/ -o username=backups,password=mypwd If I list items with accents, this is a sample of how they appear on the mounted share: drwxr-xr-x 1 root root 4096 2005-12-01 16:45 D?but de

Hello all, I am having a problem with Samba 3.0.0 (I have actually tested this with 3.0.1pre3, and seem to have the same problem). I am trying to add a new message to smbcontrol. I have put the code into smbcontrol.c, and I can deliver messages to the samba processes (using the command line: ./smbcontrol smbd <mymsg>). The problem is that messages get delivered to the Samba

Hi guys!! I've followed the windows 2000/xp tutorial and not only, but it seems not to work! I've for sure committed some errors... PC (under NAT) files: tinc/vpn/tinc.conf tinc/vpn/rsa_key.priv tinc/vpn/hosts/elegos tinc/vpn/hosts/shadowkrad tinc.conf: Name = elegos ConnectTo = shadowkrad TCPOnly = yes Interface = VPN (TCPOnly as under a NAT) rsa_key.priv: -----BEGIN RSA PRIVATE

I have gotten Samba to work but them came up with a problem. It is working on a mchine with the class C address 198.xxx.xxx.xxx. Any PC's with that on that IP address can see the server just fine. However, we also have another class C 207.xxx.xxx.xxx and folks on that one cannot see the server. We have seen this problem before and NetBeui solved that one. Any ideas? Thanks in advance.

After reading the related chapter in the Samba-3 HOWTO document I've tried to put the AD authentication in place in our network on two systems and I got stuck in exactly the same place. Here are the software configs I was using : Sys 1 FreeBSD 4.11 release sshd version OpenSSH_3.5p1 FreeBSD-20030924 Samba Version 3.0.10 Sys 2 FreeBSD 5.4-RELEASE FreeBSD amd64 OpenSSH_3.8.1p1

hi all, We are using squid 25s1 with kernel 2.4.19 and iproute2(+julian''s Pathes) with the following acl.. acl short_path dst 128.0.0.0/8 tcp_outgoing_address myIp2nd short_path we are linked to 2 isp--one having satelite & the other OFC. We want the above mentioned network to go thru OFC(ispB) as the sibling resides there. But when i use squidclient mgr:server_list

Hi, - I have changed my /etc/resolv.conf for all my three DCs. ### DC 01-03 nameserver 10.10.10.11 nameserver 10.10.10.12 nameserver 10.10.10.13 search intern.preiss.network - In the next step I changed my /etc/hosts for each DC ### DC1 127.0.0.1 localhost 10.10.10.11 01-dc01.intern.preiss.network 01-dc01 ### DC2 127.0.0.1 localhost 10.10.10.12 01-dc02.intern.preiss.network 01-dc02

Hi I''m quite new to the art of writing puppet manifest, but the more I see, the more I like it :-) I''m trying to write a djbdns dnscache module. dnscache configuration is spread in several files, for instance the ip addresses allowed to query the cache each have a file in dnscache/root/ip/ whose filename is the address. I''m trying to automate the creations of those

hi! Sorry in advance if I am not on the right mailing-list and sorry if my question is cover somewhere is doc (I didn't find anything). The result from nmblookup (same result on all platform) for a given samba server isn't what I expect. The key part of my smb.conf is: [global] netbios name = ourserver2 netbios aliases = ourserverdev ourserverlab ourserver name

On Sat, 8 Jun 2024 17:05:25 +0200 Ronny Preiss via samba <samba at lists.samba.org> wrote: > Hi, > > I have two problems with my 2 Samba AD-DC. I don't know if the two > problems are related. > Both domain controllers show the same error pattern for problem 1.The > second problem only occurs with the second domain controller. > The domain itself seems to work and