similar to: Difference between snmp traffic rate, and rate from tc

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hello, I have begun to use the tc scripts since 2 weeks ago, so I am beginner. I am trying to divide my bandwidth in 4 independent ones. Each of these sub-bandwidths is assigned to 4 different groups of ip. Bandwidth sharing is allowed. I put a Linux with two Ethernet card between the router and the LAN. Eth1 is the card connected to the router and eth0 is the one connected to the LAN. My ISP

Hi! I have a setup where I want to prefer traffic on one port (for testing purposes I used port 22) my setup is : tc qdisc add dev eth3 root handle 1: htb default 30 tc class add dev eth3 parent 1: classid 1:1 htb rate 96mbit burst 15k tc class add dev eth3 parent 1: classid 1:7 htb rate 2mbit burst 15k tc class add dev eth3 parent 1:1 classid 1:10 htb rate 96mbit burst 15k tc class add dev

Hi all, Im new to all this, and am still trying to get my head qround some of the concepts of how this all works. Ive read the howto''s, man pages etc. Ive setup packet shaping on my router/server box using HTB and SFQ, but its not working the way i would like. Im after shaping that has "weights" for classes so that a lower priority class will slow down when a higher class

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi all, I just recently began using HTB to try and manage bandwidth for my network. This is the script I''m using: /sbin/iptables -t mangle -A FORWARD -o eth1 -s ! 192.168.244.2 -j MARK --set-mark 53 tc qdisc add dev eth1 root handle 1: htb default 20 tc class add dev eth1 parent 1: classid 1:1 htb rate 100mbit burst 131072k quantum 59000 tc class add dev eth1 parent 1:1 classid 1:10

I''ve set up Traffic Shaping on a Linux Router. Using HTB with SFQ, i''m trying to slow down heavy downloading for 20 subscribers over a 2048 kbit downlink. I''m classifying internet related traffic using iptables marking. bri0 is my local lan bridge, receiving egress traffic destined for subscribers. tc qdisc add dev bri0 root handle 1: htb default 2 tc class add dev

Hi everybody! I''ve been trying with htb and tc filter. It seemed to work fine, but after testing with ethloop I''ve realized that traffic is not being distributed through the leaves as I thought. When sending packets to 1:10 and 1:11 at the same time, there''s no bandwidth sharing. There''s no traffic through 1:11 until traffic through 1:10 has finished. Though

Hello guys, I past the last days trying to configure my shorewall 4.06 firewall to allow openvpn bridging connection. My scenario is the following: roadwarrior (openvpn client) -------------> Internet ------------> (X.Y.W.Z - eth0) Firewall/Gateway (10.x.x.254 - eth1) --------> Local Lan -------> OpenVPN Server (10.x.x.249 - br0) where 10.x.x.0-254 is my private lan X.Y.Z.W is

hello, I have working htb system with about 1000 users. Until now I reload all rules at change, but it take too much time to apply. I cannot delete applyed filters. There is rules for one user: #!/bin/bash -v # Download shaper EX -> 2:20 /sbin/tc class add dev eth2 parent 2:20 classid 2:1775 htb rate 8000Kbit ceil 10000Kbit quantum 1514 /sbin/tc qdisc add dev eth2 parent 2:1775 sfq perturb

Hi all I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error: tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument if I don''t put the "perturb 10" option, it works. another question is about iptables, when I indicate the " --set-mark" option: iptables -t

Hello all, I am providing broadband service through DVB circuit. I have 4KB uplink and 32KB downlink. I want to share 32KB downlink bandwidth among 192.168.0.0/24 (20 users in this subnet i.e 192.168.0.2-192.168.0.22)subnet where each user will get 2KB to 6KB bandwidth. And from 4KB uplink bandwidth each users will get only 1KB to 2KB bandwidth.

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

Hi All, I am using the script below to limit download rates and manage traffic for a certain IP address and testing the results using iperf. The rate that iperf reports is much higher than the rate I have configured for the HTB qdisc. It''s probably just some newbie trap that''s messing things up but I''m buggered if I can see it. The following script is run on the

Hello At first I must tell you that I´m a real newbie with Linux (and english as well...) I´m using 2 vlans and shaping works quite well without vlan Now I want to do load balancing at these vlans. Any vlan should get the same minimum/maximum bandwidth of download and use the bandwidth that isn´t used by the other one at the moment. But with vlan the shaping doesn´t work. Can you please tell me

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1

I try to shape traffic using HTB and mark packets within iptables using PREROUTING. But the filterrules seems to ignore the marks set with PREROUTING Only POSTROUTING marks are accepted. First my configuration I have a router connected to the internet via ADSL over interface ppp0. eth0 is a tunnel to ppp0 and eth1 serves the LAN. LAN is 192.168.57.0/24 on 10Mbit ppp0 is 80.126.16.44 on

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Hey all. I''m trying to set up QoS using the HTB qdisc in a very basic setup, but it the example shown in the howto doesn''t seem to be working. While the packets show up in the correct classes, they appear to be completely ignoring the rates, meaning nothing gets shaped. My setup is that I''ve got a a bunch of machines behind my firewall/router: 1.2.3.1

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC