similar to: max latency with htb and wondershaper for voip and p2p

Hi, In my LAN Iam trying to make following setup: - All the traffic generated by 10.0.2.1 should go to 10.0.2.11, If the destination of this traffic is internet than it should be placed on its interface eth1. Outgoing traffic on eth1 should be shaped.For this I am using fw filters and cbq. _______ 10.0.2.1 -------> 10.0.2.11(eth0 )----| A

Hello Thilo, What did you find superior with CBQ-wondershaper over HTB-wondershaper? We have not been using wondershaper specifically but our simple tests so far seem to show that htb is much easier to configure for a given target shape (i.,e accurate) compared to CBQ. Torsten -----Original Message----- From: Thilo Schulz [mailto:arny@ats.s.bawue.de] Sent: Saturday, June 14, 2003 8:55 AM To:

Hello, I am trying wondershaper-1.1a on a friend''s pppoe connection on her Linux box. There are a few things I don''t understand. 1. She has pppoe connection so should DEV=eth0 or DEV=ppp0 ? 2. Her ISP just says on her payment bill that the speed is 128kbps, but doesn''t mention any downlink/uplink speed, so in that case what should be, DOWNLINK= and UPLINK= ? 3. She

I have been testing wondershaper 1.1a with htb. DOWNLINK=2304 UPLINK=1024 DEV=wlan0 No other changes have been made, except to comment out the 2 lines to allow the script to run. When I do a speed test from sites like www.toast.net/performance, I only get speeds equal to my UPLINK speed. I expected a speed closer to the DOWNLINK. Am I missing something here? TIA, -- -Wes Hegge Technical

I''m having a network inside of a dsl modem and I''m using wondershaper on the computers to be able to surf while bulk downloading. The problem is that also the internal traffic is shaped, which means the internal network is at 200kb/s, instead of 100Mb/s. Is there a way to exclude the internal adresses from the wondershaper rules, or is there any other good way to solve this?

I''m trying to run wondershaper in my suse 9.1 box. However, I''m getting these errors: # /etc/init.d/wondershaper restart Shutting down wondershaper Starting wondershaper Cannot find device "root" Error: Qdisc "1:" is classless. Error: Qdisc "1:1" is classless. Error: Qdisc "1:1" is classless. Error: Qdisc "1:1" is classless.

I''ve been using the wondershaper 1.1 with much success. My problem is that I want to guarantee bandwidth to mail/VPN & web surfing and make sure that I don''t break the existing script. If not how do I make sure that I can guarantee bandwidth for mail, VPN & web surfing without hurting ftp uploads. Thanks

Is there a way to apply wondershaper w/ htb to a port range? I have a ftp server on port 65432 and passive ports 50000-60000. Is there a way to set a range? or do they have to be individually listed? The following doesnt seem to work: # low priority source ports NOPRIOPORTSRC=65432, 50000:60000 # low priority destination ports NOPRIOPORTDST= Mark

> I have been trying to find the default .config file for the debian > kernel, but I can not find it! I don''t know why it''s so hard to find, > but it is not included with the source for some reason! It can be found in /boot (/boot/config-2.4.* ) -- Ludovic DROLEZ Free&ALter Soft 152, rue de Grigy - Technopole Metz 2000

Hello! I want to give port 14567 a high priority/minumum delay because its a onlien game. I took wondershaper cause its fairly easy to understand. AND i read the HowTo, especially Section 9!! DOWNLINK=786 UPLINK=128 DEV=ppp0 # start filters # TOS Minimum Delay (ssh, NOT scp) in 1:10: tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 \ match ip tos 0x10 0xff flowid 1:10 Then i

Hi Guys, I''m asking this question again because I have exhausted resources for understanding how to get it to work. I''ve read the howto on getting traffic shaping to work (shorewall''s web site) as well as trying out wondershaper''s htb and cbq scripts. Somehow both does not seem to happen as I want it to. I''ve also read through the lartc

Hi there! It just occured to me that there is a difference between wshaper and wshaper.htb. In wshaper there is no check on the ACK-bit, all small packages are priorized. Is that the new way to go, or is it a "bug"? Greetings, Nils _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

I got wshaper.htb working.....however I have 1 question. How can i limit just ftp server traffic? I have ftp server on port 21 with passive ports of 50000-60000. I currently have wondershaper with htb working on my router....but im afraid that it is also affecting all of my send traffic....not just the ftp server. I want to be able to limit the ftp server traffic only. Thanks, Mark

Hi, First time post to list - hope I''ve not messed up on the etiquette! I have a server running in a DMZ behind a wireless ADSL router. I recently implemented wondershaper, which did exactly what it should have, but, of course, knobbled the local bandwidth into the server too, as it''s going via the same (and only) interface. So, I''ve been playing with wondershaper,

Hi, I''ve been trying out the wondershaper script, but on several of the examples I keep getting the error message:- RTNETLINK answers: Invalid argument On the following line:- tc filter add dev eth0 parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate 512kbit burst 10k drop flowid :1 Based on other posts to this mail list, I gather it is an issue with kernel

Hi, I''ve modified my copy of the wondershaper script to add a few filters that allow traffic to and from a few specific ips go through with a speed of up to 100Mbits... I increased the root from 10 to 100mbit, and added this bit of code a bit further down the script; # Real time hosts for i in 62.101.244.63/32 216.74.158.11/32 216.74.158.3/32 216.74.158.57/32; do tc filter add dev

Hi everybody! I know this discussion list isn´t just about wondershaper, but i think someone can help me. I used to have a linux box running red hat 8, as firewall on my lan. I upgraded to debian 3.0 and tried to use the same wondershaper files under debian, but, when i run wondershaper on ppp0 device, it just stops transfering. Remember: its the same files i used with success under red hat 8.

Did anyone ever answer this one? THIS is what I am trying to do: >[LARTC] cbq+sfq and DSCP marking >Maria Joana Urbano stmaria@dei.uc.pt >Thu, 13 Feb 2003 19:29:42 +0000 > > * Previous message: [LARTC] Monitoring.... > * Next message: [LARTC] two routes 1 network card > * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] >

Hi, I have a question conercing wondershaper. I''m using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I''m not sure if it''s running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growing up to 1700ms - I

Hullo :) I appear to be having a common problem, but the standard fix hasn''t worked for me :/ I''m using a 2.4.23 kernel, with QoS options thusly: # QoS and/or fair queueing # CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CBQ is not set CONFIG_NET_SCH_HTB=m # CONFIG_NET_SCH_CSZ is not set CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m