similar to: Re: RED qdisc not working...

Hello... Im trying to setup HTB to allow me to shape traffic from two upstreams that meets on single lan0 interface. I prefer to use HTB qdisc within HTB root qdisc for cleaner rules design. Seems that it doesnt work at all. tc -s class show doesnt show any traffic on other classes attached to HTB qdisc. Linux 2.6.20.7 iproute-2.6.20-070313 Weird thing is that tc -s class show that 1: and 2:

Hi , i am trying to understand how RED queue discipline works but i am having a few troubles. The parameters are MIN , MAX , LIMIT , BURST I put LIMIT = 64Kb, so if i am not wrong it should PDROP anything over this value , right ? i put MIN = 8Kb , so no drops at all below this value, right ? i put MAX = 16Kb, starts to early drop anything above this using probability P. I put probability at

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi, I''m trying to use prio qdisc with htb, however not the "usual" way (like for example FairNAT). Here is my idea: Root has HTB shaping traffic to link speed -> then goes PRIO queues -> each prio queue has HTB with sublasses for each user, should look like this: 1: htb qdisc | 1:1 htb class

Hi, I have a default class for my un-marked traffic (prio 5) and a prio 0 class for the important stuff, but I do not understand why my download traffic is duplicated in both. It work fine for my upload traffic (same setting except the red class but I have the same result if I create an esfq instead). Any comments/information will be appreciated. Below my config : tc commands from my scirpt :

Hi, Is it possible to attach another qdisq under a HFSC classfull ? I try it and the configuraton works : $TC qdisc add dev $dev root handle 1: hfsc default 30 $TC class add dev $dev parent 1: classid 1:1 hfsc sc rate ${RATE}mbit ul rate ${RATE}mbit $TC class add dev $dev parent 1:1 classid 1:10 hfsc rt umax 1500b dmax 30ms rate 200kbit $TC class add dev $dev

Hi, "tc -s qdisc show dev eth0" shows qdisc htb 1: r2q 10 default 256 direct_packets_stat 48 Sent 687354936 bytes 4858561 pkts (dropped 8809, overlimits 4909679) backlog 142p and "tc -s qdisc show dev eth2" shows qdisc htb 3: r2q 10 default 256 direct_packets_stat 37 Sent 2697417450 bytes 5417551 pkts (dropped 58103, overlimits 5691061) backlog 1464p It

Hi all ! I''m building a network appliance whose goals are to enhance Voip quality on 512/128k DSL links. But, i have a voice quality problem, and i think i''m doing something wrong, but i can''t find what. Please excuse my terrible english, i''m french. >From what i''ve read, tc is the tool i need. I read the documentations, readmes and lartc.org

I am completely new to this.. I am trying to make simple traffic control.. I have read quite some manuals and posts that i found, but i don''t understand much, i think.. My situation is: i have linux server which i am using for firewall for local network.. also on same linux server i have torrentflux for downloading torrents.. What i want to do is to give priority to local clients(2-3

hi, can someone tell me what does early, marked , pdrop mean in the tc show command with RED implemented at root.How to test whether RED is working? amita _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello. I''m running linux box with Slackware 9.1 and compiled kernel 2.4.31 with "yes" to VLANs and "yes" to all QoS. On this box i have more ethernet interfaces: eth0 eth1 eth2 and so as more vlan interfaces: eth0.100 eth1.3 eth1.4 This is entrace(uplink) router to our whole network and my goal is to shape users on this machine. I want for this purpose use HTB so

Hello Mailing list, I have a problem with the prio qdisc and I don´t know what is wrong in my configuration This ist a sample configuration and looks like this: #include "fields.tc" #include "ports.tc" #define X16(i) i i i i i i i i i i i i i i i i dev ppp0 { dsmark { prio(bands 6, priomap X16($be)) { class if ip_proto == IPPROTO_UDP;

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

Thanks for quick reply Andreas! > Every class is allowed to use bandwidth as long as it does not have to > borrow (the specified rate is guaranteed). Prio in HTB only affects > borrowing bandwidth from other classes... In the example below, the class > 1:5 should be allowed to borrow bandwidth before 1:14 does. Thats exactly what I want from HTB to do..to prio the borrowed bandwidth.

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

I am using HTB for traffic shaping, my scenario is Eth1 is my local interface and I wan to shape bandwidth for IP 172.16.173.245. Now I want if any request from above IP comes its get 1mb speed and all others get 96kb speed, for this setup I make following script but it does not work. Can anyone help me ? htb script -------------- tc qdisc del dev eth1 root 2> /dev/null > /dev/null tc

i am trying to do some traffic classification using the PRIO qdisc and i am having a few problems. I have a root htb class: tc qdisc add dev imq0 root handle 1: htb default 255 r2q 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 768kbit and a child PRIO tc class add dev imq0 parent 1:1 classid 1:99 htb rate 96kbit ceil 600kbit prio 0 tc qdisc add dev imq0 parent 1:99 prio tc filter

Dear Community, sorry for the somewhat dumb question. Maybe someone has any pointer to how to setup the RED queue to mark pakets with ECN. In particular what are appropriate parameter settings for limit, min, max, etc. All my trials end up with either "RTNETLINK answers: Invalid argument", although the command line (at least for me) looks fine in regard to what is said on the

Hi, I have a router/firewall running Linux (like the most of you) and I wanted to do some traffic control. I''ve created an root PRIO qdisc like the example in paragraph 9.5.3.1 (http://www.lartc.org/howto/lartc.qdisc.classful.html#AEN903) with three SFQ child-classes. I wanted for interactive (ssh, telnet, ftp-control) and dns-traffic to be placed in the first queue, http should go in

Hello, I have a problem with simple traffic shapping in shorewall, my current configuration is: zones vlan10 ipv4 # interfaces vlan10 vlan10 detect tcpflags,routeback shorewall.conf TC_ENABLED=Simple tcinterfaces vlan10 Internal 1mbit:50kb shorewall show tc Device vlan10: qdisc prio 5: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1