similar to: In eth0 out eth1

Hello I am using linux box as a network loadbalance router. ----------------- ------------ |LAN| - |eth0 eth1(1.1.1.2) | DSL1 ------- |DSLAM (1.1.1.1) | | eth2(1.1.1.10) | DSL2 ------- |DSLAM (1.1.1.9) | ---------------- ------------ But I have a

Very strange and as you suggested delete the ifcfg-eth0 file and recreate, specify your settings. I suspect your wireless device and or systemboard is faulty. Is there a BIOS hardware self-test you could perform to check the integrity of your hardware? On Sun, Feb 9, 2020, at 8:10 AM, Nicolas Kovacs wrote: > Hi, > > I've done my fair share of CentOS 7 installations, but this is the

Hello, Am Sonntag, 9. Februar 2020, 14:10:44 CET schrieb Nicolas Kovacs: > Hi, > > I've done my fair share of CentOS 7 installations, but this is the first > time I have this kind of weird problem. Here goes. > > In my office I have a battered Dell Optiplex 320 PC with two NICs that I'm > using as a bare metal sandbox server for testing purposes. > > The

Le 09/02/2020 ? 14:10, Nicolas Kovacs a ?crit?: > Any suggestions ? I forgot to add. The onboard NIC is a Broadcom card. $ lspci | grep -i net 02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10) 02:09.0 Ethernet controller: Broadcom Inc. and subsidiaries BCM4401-B0 100Base-TX (rev 02) This card gets randomly renamed to either

Le 09/02/2020 ? 16:54, Alexander Dalloz a ?crit?: > "Kernel always uses the ethX naming convention at boot when it enumerates > network devices. Due to parallelization, the order of the kernel interface > enumeration is expected to vary across reboots." Thanks for the heads up. I experimented quite a bit, and found some surprising behavior. So I documented everything in a

Le 10/02/2020 ? 16:12, Leroy Tennison a ?crit : > There may be ways to force NIC naming, I've done so but only on Ubuntu so > you'll need to do the research if it's important to you. Things to look for > based on my experience: 70-persistent-net.rules, net.ifnames=0, > biosdevname=0. That's exactly the solution I described in detail in my blog article. :o) --

hi, = i have my wireless LAN card connected in USB port of linux machine at eth= 1, = = and another wireless LAN card connected to USB port of windows machine. = = the LAN card of windows has been plugged out. now, i want to access the = = internet sites on windows machine through the wireless LAN b/w the 2 = = machines. = I have successfully made a bridge

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Hi Everyone: I installed CentOS 4.4 on a new Dell 2950 using the server cd. No errors during the installation and no errors on bootup when loading the Eth0 or Eth1 interfaces. I currently have iptables stopped and selinux disabled. The interfaces have been given a static ip (192.168.1.x). the subnet is 255.255.255.0 and the gateway is 192.168.1.1. I can not ping any device on my network

Dear all, Has anyone experienced this whilst running DRBD over eth1 between two CentOS 5.7 servers? eth1 is a private IP address, unroutable. eth0 is the public address. CentOS will reply sometimes once every 3 days or every 14mins~ saying "My public IP is on eth1" to arp requests when it's not, it's eth0. This freezes traffic and causes issues. We've looked at arp*

There may be ways to force NIC naming, I've done so but only on Ubuntu so you'll need to do the research if it's important to you. Things to look for based on my experience: 70-persistent-net.rules, net.ifnames=0, biosdevname=0. ________________________________ From: CentOS <centos-bounces at centos.org> on behalf of Nicolas Kovacs <info at microlinux.fr> Sent: Sunday,

Am 09.02.2020 um 16:14 schrieb Nicolas Kovacs: > Le 09/02/2020 ? 14:10, Nicolas Kovacs a ?crit?: >> Any suggestions ? > > I forgot to add. The onboard NIC is a Broadcom card. > > $ lspci | grep -i net > 02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10) > 02:09.0 Ethernet controller: Broadcom Inc.

Hi, I''ve just setup my first Linux router and have run into a problem with the from source prefix when using `ip rule`. If I set a from source prefix in my ip rules the two networks can see each other but the Linux router itself can only ping 1 network. /etc/iproute2/rt_tables 255 local 254 main 253 default 0 unspec 1 inr.ruhep 100 implan 200 inet

Hi, I've done my fair share of CentOS 7 installations, but this is the first time I have this kind of weird problem. Here goes. In my office I have a battered Dell Optiplex 320 PC with two NICs that I'm using as a bare metal sandbox server for testing purposes. The CentOS 7 installer sees the connected network card as eth0. But after the first reboot, the interface comes up as eth1.

Hello, i have had a terribe day today, why? because i have been so 4 or 5 hours trying to do work this and i have not finished it. I feel very pleased if anything can help me. I have two isp connections: eth0: dhcp ip1: 82.198.*.* gw1: 82.198.*.* and a router adsl in ip 192.168.0.253: eth1: static ip2: 192.168.0.254 gw1: 192.168.0.253 the same machine has 3 more networks cards but i am

Hello All, I am trying to implement OpenVPN on Fedora core Linux 3 with the latest pathces installed. This server is used only as firewall/internet gateway/proxy/VPN server, with kernel 2.6.1-1.27.FC3 and kernel 2.6.1-1.27.FC3 SMP It has two NIC''s eth0 (10.0.0.150) connected to ADSL, eth1 (192.168.3.12) connected to the local network. I use shorewall 2.4 on this machine. I like to test

Hi all, I have a similar question like many asked before I know but Please help as i cant figure out where the problem is and how should I tackle. I have 2 ISP connections. I want to share the bandwidth from both. I have copied the script from many places and created my own after changes. Problem is that only one connection is utilized at a time. Not both working. ratio of consuming

I''ve been using Puppet now for a month or so and I''ve come to a problem that may warrant an additional Puppet metaparameter. I''m advocating the addition of a metaparameter called "preaction" (or something like that), which will perform some arbitrary action before the resource is modified. There may be a way to do this within Puppet already (with some

Hi Tinc Mailing-Group, I am a bit stuck with firewalling rules at the moment. Maybe someone could please advise me a good rc.firewall script to use on my setup. If anyone runs an ipchains firewall script on their linux box which is ALSO running tinc, could they please mail it to me, for my perusal. I have tinc pre3 set up and working on my systems, however I can only get it to work if I set the

Hi! Me and two friends are trying to get a VPN working, but we cant get routing between two tunnels. This is how it looks, all servers (192.168.*.1) are running IP Masquerade to enable the other computers behind them to access the internet. Both elayne and glenn are connecting to melc, and the tunnel between melc and glenn are running TCPOnly because that glenn doesnt have a public IP (it's