similar to: MASQed network to exit on different ext IP addres

Hi everyone. I'm wondering whether a setup like the one described below would be possible with Tinc: nodeA1 nodeB3 | | (Network A) --- [GWA] --- (Internet) --- [GWB] --- (Network B) | | nodeA2

Hello, I would like to put 1 asterisk box in Country A and 1 asterisk box in Country B. Let's assume : - Asterisk box in country A = GWA - Asterisk box in country B = GWB - Calling party number (located in country A) = CgPNA - Called party number (located in country B) = CdPNB - Second Called party number (located in country B) = sCdPNB - PSTN in country A = PSTNA - PSTN in country B = PSTNB

Hi, I have a client connected to the ''net through 3 ISP''s. Have set up a Linux box to do routing and load sharing for the 3 connections. A fourth interface is connected to the LAN with private IP addresses. Am using iptables to SNAT traffic to the appropriate IP depending on the interface the packet gets routed onto. The setup looks something like this: Interface IP

Would it be considered normal that a system behind a shorewall box that was setup for proxyarp and able to be reached from the trusted side of the net just fine on the proxyapr ip address would if it were to talk out to the world show as traffic not from the proxyarp address but the firewall''s own address or the masquerading ip used by other zones? We had not really noticed this as an

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

Behavioral science data is often collected from nested structures (students in schools, in districts, etc.). This can produce nonindependence among responses from individuals in the same groups. Consequently, researchers are advised to model the nested nature of the data to avoid biases in SE estimates. Failing to account for nonindependence can lead to SE estimates that are too large or too

What can be done if I use a masqing firewall. I'd like the machine on my internal netowrk to be able to "see" the outside world. I'd also like the firewall machine to be able to share on both sides. I'd also like to create a domain for all of the machines on the inside of the firewall. I've had many different smbclient like programs perform with totaly different

Hi! I just recently entered the wonderful world of the so called "advanced routing" and decided to try and limit the bandwidth of a MASQed network here and ended up in trouble :(. The setup is (as far as I can tell) pretty straightforward. eth0 is connected to the "real" network with a proper IP, and eth2 is 192.168.10.x (the MASQed network). All of it is basicly right out of

Hi, can anyone help me with this problem i''ve got! I have a problem with routing on my Mandrake 7.2 Linux Box i was wondering if you could help me with. I live in Australia and as broadband access isn''t very available at the moment, i have 2 modems to dialup to my isp (dynamic ips assigned) to increase my bandwidth at an affordable level. What currently happens is i have a

Hello all: I am interested in computing what the multilevel modeling literature calls a multiple membership model. More specifically, I am working with a data set involving clients and providers. The clients are the lower-level units who are nested within providers (higher-level). However, this is not nesting in the usual sense, as clients can belong to multple providers, which I understand

Hi, I have a linux box connected to two leased lines as follows: _/\__/\_ / \ +--------+ +------------+ ( Internet )----+ Router | | SMTP server| \_ __ _/ +----+---+ +------+-----+ \/ \/ | 200.200.200.254 | 100.100.100.2\ -+-------+----- ... ---------+-- 100.100.100.1\ | 200.200.200.1 +-+--+--+ | Linux | +---+---+ _/\__/\_ 192.168.1.1 |

Hello, I'm configured Sipura-3000 to forward IP calls to PSTN number on no answer (In User1 tab Cfwd No Ans Dest: 123456@gw0) IPPhone ---IP---> Sipura-3000 ---PSTN---> PSTN User Generally it works fine, but Sipura sends back SIP OK to IPPhone just prior to dialing to PSTN number. How to configure Sipura to detect that the remote side on PSTN picks up the phone and only then to

Hi again, Bonding seems to work with mode =4. I have a strange problem now - can''t get rid of old virtual interfaces which were created on the first start up of xend. Even if I boot machine with xend disabled, I still have old stuff coming up: veth0-veth5, and vif0.0-vif0.3. I would like to configure all networkig manualy first - how can I remove those interfaces, where are they

Hi, I would like to report that Tuncmatik Newtech Pro 1 KVA (http://www.tuncmatik.com/en-US/productDetail.asp?RecID=290) works with nut(2.4.1) blazer_usb, blazer_ser and megatec drivers. The UPS came with an usb cable and a java based software for both linux and windows, named ViewPower (http://www-power-software-download.com). This UPS has double interface a USB interface and a serial

Hello, I have an unusual problem and I've only found a small amount of material after searching for other posts on this topic. We have a production server running Samba version 2.2.7a which I'm told has been working perfectly for many years. Every day over the last week Samba stops authenticating users (via Active Directory) requesting access to shares. Specifically another

Hi all, I am using a redhat 8.x linux box configured with zebra routing software which is also configured with ospfd I have 2 backbone routers running ospf connected to different isp''s I have 3 local routers also running ospf within themselfs and also with the 2 backbone routers (all are linux boxes) router A - backbone router 1 router B - backbone router 2 router C - local router 1

Hello all! Is there any possibility to determine the IP address of a caller in my dialplan? I would like to have a predefined channel variable like ${CALLER_IP} but it seems it doesn't exist (http://www.voip-info.org/wiki-Asterisk+Variables) .. is this list complete? Are there any other possibility to store the SIP/IAX caller's IP address on every call? Thanks Niels

Hello I use dovecot-1.0.7 for imap. I also use vpopmail5.4.x. on qmail. When I type vuserinfo to see last login time of a mail address in my imap server, I could not see it. How do I correct that ? Thanks.

Hello, Why must a user connect to the samba server using ip addres of the server. Any days beofre he uses the server name. Regards Jean Frontin System team I R I T Universit? Paul-Sabatier 118, rte de Narbonne 31062 Toulouse cedex 04 France tel (33)(0)5 61 55 63 03 mail frontin@irit.fr

Hi everybody and merry Chrissy! I have smb listening to two interfaces and with tun0 this failed. Package was from Debian 7 - 2:3.6.6-6+deb7u4 # smbclient //10.9.8.1/public -Unot_a_user Enter not_a_user's password: Connection to 10.9.8.1 failed (Error NT_STATUS_CONNECTION_REFUSED) # smbclient //127.0.0.1/public -Unot_a_user Enter not_a_user's password: Domain=[WORKGROUP] OS=[Unix]