similar to: (no subject)

Dear all, Please someone help me regarding how to merge 2 internet link connection. I need to double the speed into my LAN. Is it possible to do that? Thx. KOMUNIKA SYSTEM Internet Solution Provider www.komunikasys.com

Hi, After spectacularly failing to get HTB to proportionately distribute excess bandwidth into multiple classes based on the rate, I decided to hack my requirements. Now I''m creating multiple classes with the sum of the bandwidths of the classes being equal to (OK, slightly less than) the link bandwidth. Scenario: Linux Router +------+ 256K

Hi! We have 2 lines with 2 mbit each. I have to set up a configuration like the following: - if both lines work, grant 3 mbit to a web service running on a server in our DMZ - if one line fails, grant all the remaining 2 mbit to that service - if the service doesn''t need all the bandwidth, use the remaining for other services I read through the HOWTO, and figured out that I need TEQL to

Guus, Below a segment of a log file. I am trying to analyse why the satellite link goes down and up all the time (sometimes 10 to 15 times an hour, sometimes not for a day. My guess is that this indicates packet loss on the satelllite link and tinc not really recovering from that. Where I inserted an empty line the log basically stopped and was silent for I guess for 14 minutes? Would setting

Hi, my name is Raymond, and I want to install HTB and CBQ on my fedora core 3. can someone tell me how to install HTB and CBQ? And, where can I find a step by step configuration way to install both of them? Thx.

Sir, Please help me to decide where is the best place/topologi to put TC with the best network performance. My problem is, I want to manage/limited bandwith for C1,C2 & C3 to internet (ONLY their access to internet, but NOT to X, Y, & Z). NOTE: VSAT = Sattelite connection X = Mail Server Y = www server Z = Proxy Server Q = WaveLAN router C1, C2, & C3 = WaveLAN client Any help

Hi all, For some reason VSAT or Satellite Internet services are not mentioned (or searchable) in this list's archives. I thought I'd let you know that I tested Asterisk using IAX (not IAX2) to make a phone call from an analog phone hooked up to an Asterisk system behind a Linksys router connected to a Gilat VSAT satmodem, and it worked. The "other end" (gateway) is a

Hello I was testing HTB using IPerf TCP traffic and the results were very good. Until I tried to add some UDP traffic the results were a little strange. this is my setup tc qdisc del dev eth1 root tc qdisc add dev eth1 handle 1:0 root htb default 2 tc class add dev eth1 parent 1:0 classid 1:1 htb rate 1mbit tc class add dev eth1 parent 1:1 classid 1:2 htb rate 500kbit ceil 1mbit tc class add

Hi list, playing around with HTB showed that it may introduces pretty much latency for our setup. Docum.org says the following: "The default qdisc added to a htb class is pfifo_fast qdisc. The size of the qdisc is the device queue length and this is 100 packets for an ethernet device. So if you want to have a shorter queue, you have to add a shorter qdisc to the htb qdisc." Can

Hi, I''ve a vsat internet link and I want to know if I can make VOIP calls under it. ( Ping in the best case reach 900/ 100 ms by sattelite effect ) Can with SIP protocol make voip calls ? Thanks andres

Folks, We have a setup where each mobile node connects with 1 or more tinc instances (over different links) to a central node. tinc is running in switch mode. The link is chosen by setting the IP address on the active link's interface, and the central node sees this after the first packet on the link, and moves the MAC address to a different 'ethernet port' (link). This works really

Hi guys Finally , after reading a lot of docs from larc/opalsoft/etc, I decided to start learning some QoS First of all I''m trying to shape only download from a iptables+squid+qos machine for 4 machines at LAN ( eth0) Can anyone help me , cause it is not working properly.. ----------------------------------------------------------------- #!/bin/bash # 128Kbps

Hello, Currently I use following htb configuration: --------------- 1:0 ----------- / | \ 1:1 1:2 1:x / | \ / | \ / | \ 1:1001 1:2001 1:3001 1:1002 1:2002 1:3002 Classes like 1:1,1:2,1:3 limit my clients to some value, let''s say 128kbit/s. Classes like 1:1001 are

I want to thank the list and Andy Furniss for helping me get started with TC. Here is my current script with some additional comments. Please note that I can''t really endorse anything below, as I''m new at this. I can tell you that using the monitor_tc_top.pl script, I can see traffic going into all these classes and that my users seem very happy with the results (we are 57

first: my ISP mark MAN traffic with TOS 15 and i want tu can to filter this kind of traffic with iptables second: i use imq patch for kernel 2.6.9 and htb for some traffic management third: i want to redirect the traffic marked with TOS 15 imq1 or imq0 and then to came with some htb rules. just this ... how must to modified to can to do some thins ? ... #iptables -t mangle -A PREROUTING -m

You might want to check out this script http://www.geocities.com/jame_sj I just noticed a bug (that I need to figure out...) in it but this should give a start.. James Message: 4 From: "Cow" <cow@gline.us> To: <lartc@mailman.ds9a.nl> Date: Mon, 6 Sep 2004 23:56:13 +0200 Subject: [LARTC] HTB problem... Hi folks. Let''s say I would like to make some bandwidth

Hi, I am tring to setup AF on my router using GRED/HTB. I plan to mark and set the DSCP with iptables and the ingress qdisc to set the tc_index for the proper GRED vq(1-12). My question is: Is there a way to allow for priority between the af classes and within the af classes? also would it be possible to to the following: HTB(6Mb) | GRED(1)grio HTB1 (af1) (1MB) GRED(1-3)grio |

I''m trying to do some very simple rate-shaping on an interface. I want to limit my 100baseT interface to 7 megs both ingress and egress of the interface. I''ve been hacking my way through the documentation and some examples and I''ve come up with the following configuration for tcng that seems to do what I want. I''m curious if some of the other experts out

Hello I am anirudh, I need help to write script to fetch detail like ips, speedlimit from mysql and add htb rules at the starting of the server. it is for a small isp i am working for. can any one help me out!, i had tried but fail to limit speed -- Anirudh Chowdary _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

I''m trying to shape each machine on an interface to 256k each, but I''m getting stuck and only able to shape an entire interface to 256k. What should I be doing differently here? tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100MBit ceil 100MBit tc qdisc add dev eth0 parent 1:10 handle 110: