similar to: I gave up.-...-.-.-.- :''(

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

I''m trying to shape each machine on an interface to 256k each, but I''m getting stuck and only able to shape an entire interface to 256k. What should I be doing differently here? tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100MBit ceil 100MBit tc qdisc add dev eth0 parent 1:10 handle 110:

hello, I have working htb system with about 1000 users. Until now I reload all rules at change, but it take too much time to apply. I cannot delete applyed filters. There is rules for one user: #!/bin/bash -v # Download shaper EX -> 2:20 /sbin/tc class add dev eth2 parent 2:20 classid 2:1775 htb rate 8000Kbit ceil 10000Kbit quantum 1514 /sbin/tc qdisc add dev eth2 parent 2:1775 sfq perturb

Hi all, I''ve got a BOX running CentOS 4.5. It acts as a firewall + router. I have installed both iptables and iproute2. I has 3 network cards. eth0 is connected to Internet (is has an internet ip. pls assume its ip is 1.2.3.4/29). it is a 256 Kbit link. eth1 is DMZ. its ip is 192.168.100.254 eth2 is LAN. Its ip is 192.168.101.254 I have alreday shaped traffic to 64 Kbit on eth1 for

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

//Just to not forget eth0 is WAN and eth1 is LAN . The box is NATing my lan. I configured tcng to shape both download and upload and i got connection loss again. Maybe it is my script fault or it is something bad with packets marking . this is how i mark outgoing packets iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.1.23 -j MARK --set-mark $ip and this part of my script which is intented

Hello. I have a 1024/256kbit ADSL and tried to shape outgoing traffic in order to improve latency. Here is my config. UPLOAD_RATE="256" UPRATE="$[4*$UPLOAD_RATE/5]" (a little smaller) UP70="$[7*$UPRATE/10]kbit" UP30="$[3*$UPRATE/10]kbit" UP20="$[2*$UPRATE/10]kbit" UPRATE="${UPRATE}kbit" IF="eth2" IPTABLES="iptables -t

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

If in one time 3 IP adresses using internet. TC script: DEV=eth0 # LAN SERVER_IP=192.168.1.2 # eth0 ip address tc qdisc add dev $DEV root handle 1: htb default 255 tc class add dev $DEV parent 1: classid 1:1 htb rate 384Kbit quantum 1500 tc class add dev $DEV parent 1:1 classid 1:20 htb rate 128Kbit ceil 384Kbit prio 0 quantum 1500 tc class add dev $DEV parent 1:1 classid 1:21 htb rate 128Kbit

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi Stef, Sorry to write to you directly but my list membership is not working, I receive the archive but cant send to the list, cant delete myself because I don''t exist and can''t rejoin as they say I do exist, anyway hope you don''t mind Can you tell me what the difference between these two scripts is please. What I want to achieve is a high speed channel 1000kbit from

Hi! I''m trying to limit the uplink bandwidth using htb but no packets are overlimit or dropped. :-( My router config: * Linux kernel 2.4.20-pre10 (htb v3.7) with everything built as modules in QoS, iptables in use. * tc binary from htb3.6-020525.tgz * external interface eth0: Internet access, 512 kbit/s uplink speed * internal interface eth1: internal LAN, 100 Mbit/s The hosts in the

Hi guys I have a config as follows for one of my networks. I want to give the xxx.xxx.xxx.xxx/xx network 64kbit for everything from the internet but 8000kbit from our internal servers on yyy.yyy.yyy.yyy/yy network. It does not work. I only want to use u32 filters. I think what's happening is the first flowid of 1:21 is catching them and not getting to the 1:40 flowid. Is this right? The box

Hello! I have a quite complicated setup. In my network on each interface there is bandwidth limitation for each user. Booth outgoing (on interface itself) and incoming (attached IMQ) traffic. There is main HTB class which limits bandwidth for whole interface and HTB subclasses for each user. Filtering is done with hashing filters. This setup was working correctly. But now in the network I

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

Hello, I have problems with htb. The problem is that when I download any file via shaper with htb, the traffic is very dinamic, it jumps, for example: if i have set ceil = 128kbit the results that it jumps from 112kbps to 144kbps or smth like that maybe its not very bad, but when the traffic drops down to 40kbps or less and then after 1 or 2 seconds jumps to 144kbps, its bad :-( and it is often.

Hi, complete newb and I apologise for it. I have a setup where my linux box has multiple broadband connection where I am routing certain things over certain interfaces, currently 2 links eth2 is a 1500/256 and eth3 is a 512/512, eth0 is the link to the LAN for users. What I am trying to do is traffic shape the information going out eth0 to the local users by the interface the traffic arrived

Hi,lartc I used iproute-060110 with iptables1.3.4 on gentoo 2005r1 kernel 2.6.14-5. I find some error messages in system logfile: HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is big. Consider r2q change. tcf_action_init_1: successfull police HTB: quantum of class 20001 is big. Consider r2q change. HTB: quantum of class 20020 is big. Consider