similar to: negative token/ctokens

Hi, One more of those ... 1) what is a ctoken with regard to HTB? Does the ''c'' stand for ceil and if so how is it different from tokens? 2) Is the difference, only in the generation of these tokens? 3) Would the ctokens and token be treated equally once borrowed? Kindly help. Thank you. Regards, suraj. __________________________________ Do you Yahoo!? Protect your

after i use "tc -s -d class ls dev eth0" will show statistic data about HFSC ,like this root@ubuntu:/home/shaper# tc -s -d class ls dev eth2 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 24 work 13844792199226589188 bytes rtwork 20937281664 bytes level 3461036864 class hfsc 1:11 parent 1:1 sc m1 30720Kbit d 10.0ms m2 30000bit ul m1 0bit d 0us m2

Hello, I''m having such problem with HFSC with following config: + tc qdisc del dev eth3 root + tc qdisc add dev eth3 root handle 1: hfsc default 2 + tc class add dev eth3 parent 1: classid 1:1 hfsc ls rate 512kbit ul rate 512kbit + tc class add dev eth3 parent 1:1 classid 1:2 hfsc ls rate 2kbit ul rate 400kbit + tc class add dev eth3 parent 1:1 classid 1:3 hfsc ls rate 32kbit ul rate

Hi, I have problem with this simple script: #!/bin/bash if [ "$1" == "del" ]; then tc qdisc del dev eth0 root handle 1: htb default 10 exit fi tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 800kbit ceil 900kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 300kbit ceil 600kbit tc class add dev eth0 parent 1:1

//Just to not forget eth0 is WAN and eth1 is LAN . The box is NATing my lan. I configured tcng to shape both download and upload and i got connection loss again. Maybe it is my script fault or it is something bad with packets marking . this is how i mark outgoing packets iptables -t mangle -A MYSHAPER-OUT -p tcp -s 192.168.1.23 -j MARK --set-mark $ip and this part of my script which is intented

Hi all :) I''ve been using a tc setup for almost two years, but at some point (probably when I switched to kernel 2.6.x, but I''m not sure) it has started making something very weird. For a certain class, the rate is 125000bit and the ceil is 270000bit, but the fastest rate I get is about 75-80000bit, instead of the "promised" 125000, *with no other traffic in

Hello, I am attempting to match on a single bit of the NF mark value, and after hours of reading and googling I can not get the syntax right. It got to be something very simple, yet I can''t find it. Any help will be greatly appreciated. Thanks! root@Arzamas:/etc/init.d# tc filter add dev wan_b protocol ip prio 2 parent 1:0 basic match meta\(nf_mark mask 0x80 eq 0x80\) flowid 1:0x80

A bit more detail. I have the following htb classes set up... class htb 1:356 parent 1:4 leaf 356: prio 4 quantum 1600 rate 12800bit ceil 51680bit burst 15Kb/8 mpu 0b overhead 0b cburst 1663b/8 mpu 0b overhead 0b level 0 class htb 1:357 parent 1:4 leaf 357: prio 4 quantum 1600 rate 12800bit ceil 51680bit burst 15Kb/8 mpu 0b overhead 0b cburst 1663b/8 mpu 0b overhead 0b level 0 class htb 1:2 root

Hi All, I''m using Shorewall 3.0.4 and I''m wondering if it is possible to do traffic shapping on only one interface from a bridge. The firewall has got 3 NIC, eth0, eth1, eth2. eth0 and eth2 are bridged, but if I''m right, when you specify a traffic rate for a link, you do it for the interface. In my case, eth0 and eth2 do not appear in the interface file, but it is

Hi, I have implemented QOS classifiers using TC with HTB. The classification is working. I would like to know whether there is some tool which will help me in monitoring the bandwidth share of the various classes. Thanks, Vinod C

Hi All, I am using the script below to limit download rates and manage traffic for a certain IP address and testing the results using iperf. The rate that iperf reports is much higher than the rate I have configured for the HTB qdisc. It''s probably just some newbie trap that''s messing things up but I''m buggered if I can see it. The following script is run on the

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

in HTB use 2 bucket for manage 2 rate??? first bucket -> keep token for sending with rate second bucket -> keep ctoken for sending with ceil rate Is it true?? may be i''m misunderstand about token/bucket thoery _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hello I ma trying to find out how to change such parameters as: tokens and ctoken (Linux, Red Hat 9, htb). Is it possible at all? Best regards Andy ---------------------------------------------------------------------- "Samcze pasorzyty s od usugiwania kobiecie i wykonywania nie skomplikowanych prac domowych..." >>> http://link.interia.pl/f1856

What''s going on here? I''m spewing UDP traffic at this thing, and it is exceeding the ceil. Anyone know how to fix this? class htb 1:613 parent 1:5 leaf 613: prio 6 quantum 2560 rate 20480bit ceil 103360bit burst 15Kb/8 mpu 0b overhead 0b cburst 1728b/8 mpu 0b overhead 0b level 0 Sent 16591370 bytes 4159 pkt (dropped 39449, overlimits 0 requeues 0) rate 412384bit 6pps backlog 0b

https://bugzilla.samba.org/show_bug.cgi?id=12755 Bug ID: 12755 Summary: [patch] Improve execution speed on Windows; with Win32 API calls Product: rsync Version: 3.1.3 Hardware: All OS: Windows 10 Status: NEW Severity: normal Priority: P5 Component: core

Hello all. We have three tunnels over the internet between our "central" gateway and some branch office gateway. Each gateway has eth0 on its LAN an eth1 on the internet. We use DSL lines and eth1''s have the internet IP directly attached on it. Each gateway, also, acts as iptables NAT gateway. The outgoing bandwith is 300 kbit, and we tried this (i.e.) on each tunnel: tc

https://bugs.freedesktop.org/show_bug.cgi?id=36560 Summary: snow when motion is present (NV15) Product: xorg Version: git Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:10 rate 30kbps ceil 100kbps burst 2k tc class add dev eth0 parent 1: classid 1:11 rate 10kbps ceil 100kbps burst 2k tc class add dev eth0 parent 1: classid 1:12 rate 60kbps ceil 100kbps burst 2k tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 172.16.11.2 flowid 1:10 i login

Hi there, I got a problem when trying to read in a .cel file using ReadAffy(). R codes: require(affy) ReadAffy(filenames="CH1.CEL") It failed and I got the error, Error in read.celfile.header(as.character(filenames[[1]])) : Is CH1.CEL really a CEL file? tried reading as text, gzipped text, binary, gzipped binary, command console and gzipped command console formats Also, I tried