similar to: Dependent dropdowns

Hello! We have two upses: MGE Pulsar M 3000 and MGE Pulsar EXtreme 3200C. They connect to server by USB. EXtreme works good with usbhid-ups (nut 2.2.1) and newhidups (nut 2.0.5). But Pulsar M doesn't want to work with usbhid-ups. - my ups.conf: [extreme] driver = usbhid-ups port = auto product = "EXtreme" [pulsar] driver = usbhid-ups port =

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hello all, On Tue, 26 Apr 2016 22:21:34 -0400 Digimer <lists at alteeve.ca> wrote: > On 26/04/16 10:07 PM, John R Pierce wrote: > > On 4/26/2016 6:45 PM, Jack Bailey wrote: > >> > >> Today someone in a meeting claimed the Bourne shell is deprecated, one > >> of the reasons being it supposedly has security issues. Well that's > >> all

Charles, It starts out good, then goes into a Connection timed out loop. If I can provide any information to fix a driver I'll do my best. Here's the output: # /usr/local/ups/bin/usbhid-ups -DD -a eaton Network UPS Tools - Generic HID driver 0.41 (2.7.4) USB communication driver 0.33 0.000000 debug level is '2' 0.002550 upsdrv_initups... 0.288229 Checking device

Hi! I have a MGE Pulsar ES 8+ UPS. Here is the response of some commands: - Si --> 3000 44 0 - Si 1 --> Pulsar ES8+ 0 - Ai --> 5 0 It's not recognized very well by the current (from CVS) mge-utalk driver: [root@srv01 ~]# /home/rog/src/nut/drivers/mge-utalk -i 20 -DDD -u root /dev/ttyS0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.86 (2.1.0) debug level is '3'

FYI, Seagate has announced a new enterprise SSD. The specs appear to be competitive: + 2.5" form factor + 5 year warranty + power loss protection + 0.44% annual failure rate (AFR) (2M hours MTBF, IMHO too low :-) + UER 1e-16 (new), 1e-15 (5 years) + 30,000/25,000 4 KB read IOPS (peak/aligned zero offset) + 30,000/10,500 4 KB write IOPS (peak/aligned zero offset)

With the Dell OpenManage question on my mind (and having seen it answered very well), I was reminded of an interesting and a little surprising thing I saw yesterday. I upgraded a PowerEdge 2850 from CentOS4 to Fedora Core 5 (keeping everything updated for GNUradio to run on CentOS 4 became more of a job that it should have) for our pulsar data processing machine (it has a GNUradio Universal

On 26/04/16 10:07 PM, John R Pierce wrote: > On 4/26/2016 6:45 PM, Jack Bailey wrote: >> >> Today someone in a meeting claimed the Bourne shell is deprecated, one >> of the reasons being it supposedly has security issues. Well that's >> all news to me, and I cannot find anything online to corroborate the >> claim. Is this true, is it a bash vs. Bourne FUD, or

Hi, I've been using NUT for many years to look after the UPS on my home servers. Originally I was using a Compaq R3000 but that was replaced with an MGE Pulsar Evolution 3000 about a couple of years ago because the Compaq one was just too noisy! I'm just setting up a replacement server and would like to connect it using a serial cable as I've found that the USB connection

Hi all, Not sure if this is on topic or not. I'm trying to query an SNMP value from centos 6 and I get a bad response if I don't specify the MIB to use: 0 digimer at pulsar:~/anvil/striker$ snmpget -v2c -c public -m /home/digimer/Downloads/APC/AP7900/MIB/powernet421.mib 10.255.2.1 .1.3.6.1.2.1.2.2.1.6.2 RFC1213-MIB::ifPhysAddress.2 = Hex-STRING: 00 C0 B7 5F 8A 85 0 digimer at

Hi, I have a FreeBSD 9.2 system with NUT 2.6.5 (installed via the ports tree) with an MGE Pulsar 1500 connected. A while ago it complained it needed the battery replaced and it was finally replaced last week, however I can't find out how to reset the flag in NUT. I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. The UPS is connected via RS232 and upsc output

Hi everybody, I installed and configured Nut 2.4.3 on Debian Squeeze, using package. It monitors an MGE Pulsar 1500 UPS in standalone mode. Here are parts of upsmon.conf : SHUTDOWNCMD "/bin/bash /root/extinction.sh >> /var/log/ups/ups.log 2>>&1" NOTIFYCMD "/bin/bash /usr/sbin/alerte.sh" [...] NOTIFYFLAG ONBATT SYSLOG+EXEC At startup, driver, upsd and upsmon

(Sorry, I accidentally discarded the wrong message in the moderation queue - please subscribe to the list to avoid this in the future.) > From: <onyx at netfusion.fr> > Subject: [HCL] MGE Pulsar Evolution 1100 - not recognized by USB driver > Date: December 22, 2011 12:15:16 AM EST > To: <nut-upsuser at lists.alioth.debian.org> > > > Hi everybody, > > It

We have several systems in remote locations and I have found that the ones in the US are having issues.. We are an Australian company and can't source a 110V UPS locally so we arrange to have one bought for the site when it's installed. It seems that in the US we are getting "Pulsar EX 1500" UPSs but locally we buy "Pulsar 1500". NUT seems to work find with the

-- Horst Garnetzke hg@pulsar.de PULSAR Ges. für Kommunikation und Systemsoftware mbH Hollenstedter Str. 43 D-21258 Heidenau ++49 4182 9592-11 (-17 FAX) http://www.pulsar.de (Amtsgericht Tostedt HRB 5178 GF: Horst Garnetzke) _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi, I have a <form> page in which there are a number of dropdowns and multi-selects, each of which is populated upon the page loading by quering its own table with the most recent values. These other tables are very simple two-column set-ups - one for the ID/value and another for the verbose description. I am getting the editing/creation stuff working fine. The dropdowns work with a

I''m looking for a plugin or general directions on where to find code implementing not only in-place editing of text fields, but also of dropdowns and checkboxes. There is a recipe in "Rails Recipe", but it only covers dropdown menus, and chances are that there is a plugin somewhere out there. However, I''ve only found "InPlaceControls", which, it

Hi, I have these models : Country, State, City . Each of these model has a dropdown, when i select a country i want to populate state acording to the selected country and also city with state selection. I know that to do this i have to use jquery/ajax , but i dont know wich is the best way to do it. I have this example as reference :

Dear Sirs, I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like to use it to power FreeBSD 9.0-Rel server. Of fortunately I have problem with recommended driver - mge-utalk, nut 2.6.4 (installed from FreeBSD Ports). I get messages: Could not get multiplier table: using raw readings. and updateinfo: Cannot update system status I saw similar thread on mailing list with no