similar to: ip rule, fwmark, mangle and src IP

Hi folks, I know this isn''t a shorewall question, but i''m hoping someone can point me to the right place to look for answers on this (since, as Tom suggests, search engines are useless for some things): Here is my firewall setup: ADSL1 ADSL2 dialup \ | / firewall | DMZ It''s a fairly simple setup. ADSL1 has a static IP, ADSL2 is

Hi, I''ve setup a gateway using multiple default gateways and netfilter MASQUERADE to load balance traffic between two DSL interfaces and one dedicated link, and when I try to download something big, or when I''m using MSN (both in clients under this gateway), sometimes, or most times, after a while the connection timeouts. The connection doesn''t seem to change its

Hi, I''m trying to use Shorewall (3.0.6) to accomplish what I thought was going to be fairly simple. Unfortunately, I can''t get the dmz to work correctly, and I''m getting martians logged against the interface at issue. Any help I could get would be greatly appreciated! A picture of my physical setup is attached. I have also attached a shorewall dump. To make a long

Hello, We have 3 DSL connections connected to eth3 and another interface with a dedicated link in eth0 (main table) We want to balance selected traffic (using fwmark and iptables) through our 3 DSL connections in a secondary table named DSL (without using the dedicated link in eth0), but the next command is not accepted, and gives us the following error: # ip route add default

Hi William. Thanks a lot for your help. Im having some trouble recompiling my kernel after a installed the patch. Im running RH 7.3 with kernel 2.4.18-3. The patch I installed is routes-2.4.16-6.diff. I got no errors installing it. I added the multipath support, and recompiled it. The make dep and the make bzImage went fine. I got error during the make modules. These are the errors:

hi all, I have a firewall with 2 gateways. Router A (main, adsl), router I (backup, isdn). In case of failure of adsl I switch to isdn. How can I know when it is time to go back? Which is a standard way to test the adsl line? TIA sandro -- Sandro Dentella *:-) e-mail: sandro@e-den.it http://www.tksql.org TkSQL Home page - My GPL work

I'm using shorewall 3.0.4 with ubuntu dapper. I've compiled the kernel with the option CONFIG_IP_ROUTE_MULTIPATH_CACHED=n. I had a trouble with, pptp connection, I'm trying to connect a using microsoft vpn a vpn server out of my lan, and don't work. My files <providers> ADSL1 1 1 main eth1.600 10.190.1.1 track,balance eth0 ADSL1 2 2 main eth1.601 10.190.2.1

Hello r helpers! Below is the whole coding for my programme. Before proceed more further, let me explain for you. First of all, I need to compute trimmed mean. Till that step is ok. Then I need to compute ssdw which is sum of square deviation. If I do equal trimming at both tail of distribution that I chose, I will use the first ssd formulae which is "a". But if I am doing unequal

Hi guys, I have a question about of route-map with linux, I have two routers linux, one for Internet Trafic and other for VPN traffic, both routers have public IP''s address. Internet with nat VPN with nat eth0 200.244.10.1 eth0 200.244.10.2 ---- ----

Hi all, i''m puzzled by a ploblem and I don''t know how to debug it... I have a firewall with 2 gateways, adsl and isdn. Main gateway is via adsl, backup via isdn. I setup 2 table ''adsl'' and ''isdn''. You can find a description below. I made a script to test both tables. That mainly 1. adds an iptables -t mangle -A

Hi. So I have been having problems using scp to copy files between two of my machines, both of which are running OpenSSH 2.30p1 (though I've had the same problem with previous versions). It is basically as simple as the file not being transferred after authentication occurs. I can however use scp to copy files back and forth from another machine using a SSH Communications version

I already setup several 2 gateways boxes, with rules too decide which lan should use which gateway. Now I''m stuck with a simpler problem. At home I was just making some experimental setup: * 1 adsl (ppp0) * 1 more tables in rt_tables (200 ping) called "bluff" * table ''bluff *has not* a default route root@fw-eden root # ip ro li table bluff

OK, maybe the message was too long... how can I debug why a packet (eg: icmp reply) that arrives to my box (tcpdump shows it) and does not show up to ping even if it is: a. destined to my box b. is not dropped by iptables I strongly suspect it is a routing problem, since I only have this if I define more routing tables. So I think you are the guys/gurus that can help me...

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

I am relatively new to iproute2. Any information on the topic below would save me considerable time. I appreciate any help, thanks. We want to plug two lines into a webserver to increase the bandwidth available to the hosted sites. Rather than use round-robin DNS we would prefer to use iproute2 to use equal cost routing across the two lines. However, I am still not sure how well that will

Hi all! I''ve got 2 (soon 3) internet connection. 1 - via ADSL, 2(and3) via ppp My network: http://desima.objectis.net/network-diag linux1: user1.user2 eth0=192.168.1.1 ppp0=192.168.5.2( gw 192.168.5.1) gw=192.168.1.2 ( thru ADSL) compA=192.168.1.6 compB=192.168.1.15 gw2=192.168.1.217 via ppp to different ISP All works for compA and CompB, user1 should use default gw(192.168.1.2)

Hello, I''m having a very strange problem concerning traceroute and routing and didn''t know if lartc or netfilter would be the correct choice for asking. (so sorry if my question is misplaced) I have the following setup: public ip -- gw1 -- 172.16.0.1 --- 172.16.0.2/and public ip''s --- gw2 --- switch --users (public and private ip addresses; ip-user-pub) from the

Hello, Our service has multiple Samba servers to serve up the same directories for our users. The users map to a single address, which directs them to a server by round-robin DNS. This hasn't really been a problem until recently. One user in particular complains that he loses his session, often in the middle of editing a document, causing problems with Windows file locking and he says he

Sorry for the long descritpion of the problem, I''d like to know If I misunderstand something or if I meet an intrinsic limit of my setup. 217.58.51.162 HDSL eth1 - SRV_XP: 192.168.254.10 eth0: 192.168.254.1 -----+------------------+------- 81.121.243.250 ADSL eth3 - I want to allow incoming pptp request (port 1723) to be forwarded to srv_xp

Hi, How can I pass the following data to te queuelog via ami?? Agent,data. ?? I'm doing this: Action: QueueLog\r\nQueue: queueprueba\r\nEvent: Login\r\n\r\n And thath works fine getting the log with the event but I cant find how to pass the agent and data parameters Any idea? Thnks -------------- next part -------------- An HTML attachment was scrubbed...