similar to: HFSC Two piece service curve questions

Hello, I just found the great howto and started shaping my internet connection. The howto''s last update is a liitle in the past now so I have some questions about how things are done the best way nowadays ;-) To ensure a stable and low latency voip communication I added an HFSC qdisc to device ppp0 (1 Mbit SDSL). There are two classes (by now): One for SIP and RTP and one for the

Hello, I''m using Linux kernel 2.6.x and tc (from iproute2 package). I''m trying to use HTB or HFSC scheduler in order to limite the rate of outgoing packets and also in order to minimiez delay for RTP stream. But I didn''t suceed in having this 2 QoS services working. I use Iptables in order to classify packets. Here is my HFSC conf. In fact the pings that i send from

Hello, I’ve read this Article avout VOIP and HFSC http://automatthias.wordpress.com/2006/06/30/hfsc-and-voip/ I’ve got few questions ? Considering this tc class add dev $DEV parent 1:1 classid 1:2 hfsc \ rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \ ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \ ul rate ${UPLINK}kbit rt = realtime curve ls = linksharing curve but m1 = ? m2 = ? d =

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify fallback

My hfsc rule .. tc qdisc add dev eth2 handle 1: root hfsc iptables -t mangle -N ms-all iptables -t mangle -N ms-all-chains iptables -t mangle -N ms-prerouting iptables -t mangle -A PREROUTING -j ms-prerouting iptables -t mangle -A ms-prerouting -j CONNMARK --restore-mark iptables -t mangle -A ms-prerouting -p udp --dport 4444 -j MARK --set-mark 1 iptables -t mangle -A ms-prerouting -p udp -m

Hello, I''m having such problem with HFSC with following config: + tc qdisc del dev eth3 root + tc qdisc add dev eth3 root handle 1: hfsc default 2 + tc class add dev eth3 parent 1: classid 1:1 hfsc ls rate 512kbit ul rate 512kbit + tc class add dev eth3 parent 1:1 classid 1:2 hfsc ls rate 2kbit ul rate 400kbit + tc class add dev eth3 parent 1:1 classid 1:3 hfsc ls rate 32kbit ul rate

Hi, Is it possible to attach another qdisq under a HFSC classfull ? I try it and the configuraton works : $TC qdisc add dev $dev root handle 1: hfsc default 30 $TC class add dev $dev parent 1: classid 1:1 hfsc sc rate ${RATE}mbit ul rate ${RATE}mbit $TC class add dev $dev parent 1:1 classid 1:10 hfsc rt umax 1500b dmax 30ms rate 200kbit $TC class add dev $dev

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and  HFSC so i''m doubt a lot thing and your reply are so very helpful to me ... My question is In HTB tc command question 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about

Hi I''m moving to hfcs (mostly succesfuly:) ), but I''ve encountered a strange problem: When I download something from this server using wget (one thread) via an idle uplink, I get no more than 130 kbit/s, and when I''m using prozilla (or start more wgets), I get about 200 kbit, but still it''s not all the link can do (240) - the rest remamins unused. Is this

hi list, i''m about to setup traffic shaping on a server and got some small questions about the setup. i read alot of docs/howto''s but there are still some questions i''d like to ask. setup on the box is: - external if is ppp0 (dsl) - internal if in eth0 (with ~15 nat''ed boxes) - openvpn at tun1 since all ppl on the lan feel like they have to use p2p i decided

Hi First I must say that I`am an author of HTB auto-configurator (so I know some about QoS under linux) and I have read a lot of articles about HFSC, but I still don`t know how to configure this algoritm properly. Maybe somone can help me and write a little example for me (the best will be Patrick McHardy who has ported HFSC to linux) - please just three queues. My situation: Let say I have 1Mbit

I''m using HFSC to limit bandwidth for our wireless customers. However, I''d also like the bandwidth prioritized based on packet type. This is what I''m trying right now, and I''d just like some input from anyone out there knowledgeable in this on whether it does what I want it to do: Eth1 -> HFSC ........|-> HFSC (User1) (Min 512 Kb, Max 1024 Kb, Burst 1536

Hello list, I am now using hfsc for QOS. I have something like this: tc qdisc add dev ethx root handle 1: hfsc default 9 tc class add dev ethx parent 1: classid 1:1 hfsc ls m2 70mbit ul m2 70mbit tc class add dev ethx parent 1:1 classid 1:9 hfsc ls m2 7mbit #DNS stuff follows tc class add dev ethx parent 1:1 classid 1:2 hfsc rt m1 12mbit d 1ms m2 1mbit #Half-life tc class add dev ethx parent

hi, I would like to use the HFSC scheduler for my QoS. I''ve 4 class and 2 of them need to control the bandwidth and the latencies so I think I must use HFSC. So I read some doc ( http://del.icio.us/tag/hfsc ) but its not very clear. I make some tests with differents parameters but I''m not able to use correctly this scheduler: $TC qdisc add dev $dev root handle 1: hfsc default 40

Hello, First I want to point out that I''m not so familiar with HFSC, since there not so much info online. But here is my script: ${TC} class add dev ${LAN_IFACE} parent 1:0 classid 1:1 hfsc ls rate 100mbit ul rate 100mbit ${TC} class add dev ${LAN_IFACE} parent 1:1 classid 1:2 hfsc ls rate 90mbit ul rate 90mbit ${TC} class add

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Hi, I''m trying to get a handle on hfsc. Here is my configuration: root@jmnrouter:/jmn# tc class show dev vlan1 class hfsc 1: root class hfsc 1:1 parent 1: ls m1 0bit d 0us m2 225000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:10 parent 1:1 rt m1 191000bit d 25.0ms m2 135000bit ls m1 0bit d 0us m2 135000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:20 parent 1:1 rt m1 22008bit d

after i use "tc -s -d class ls dev eth0" will show statistic data about HFSC ,like this root@ubuntu:/home/shaper# tc -s -d class ls dev eth2 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 24 work 13844792199226589188 bytes rtwork 20937281664 bytes level 3461036864 class hfsc 1:11 parent 1:1 sc m1 30720Kbit d 10.0ms m2 30000bit ul m1 0bit d 0us m2

now i''m read a lot of knowledge paper about traffic control in linux because now i''m try to develop and research about traffic shaper so can everybody tell me about my topic ... Is it can do for real???? my topic is " now, many organization use traffic shaper for control traffic and bandwidth because don''t want something example some mac address, ip address,