similar to: Per user bandwidth limiting ..for small ISP.using Squid

Sir, I have one 2 MB link which I have to distribute to 200 people. Caching may enchance performance. Kindly suggest packages for this purpose under GPL. Regards, Rayudu. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hello, guys, I am trying to get rshaper 2.01 to work on our Redhat 6.2 servers, but it does not seem to be able to control the bandwidth usage, here are the details, 1. Our production servers are all Redhat 6.2 with Kernel 2.2.19-6.2.12, the software we use are customized specifically for RH6.2, so I can''t upgrade to 2.4 kernel. 2. On my test server with the same RH6.2 and kernel (it has

Hello, We are managing the control of outgoing bandwidth using HTB. We are trying to use rshaper to control our incoming bandwidth. But the bandwidth doesn''t seem to come under the specified limit. We are not sure what we did is right. This is what we did. insmod rshaper.o rshaperctl 192.168.1.20 500 There were no errors. 192.168.1.20 is our IP in a LAN.

Hello all, I''m reading the nice documentation about shorewall with multi isp. And I wonder about squid (non transparent) and shorewall Can I use on same machine, squid with ldap ident, dansguardian, and shorewall with multi-isp (four or five) ? Perhaps there is a problem because squid mask source IP, shorewall can maintain and load balance sessions for the same source IP ? Thanks Fred

Hello, I wonder if someone could use the TPROXY with Shorewall and transparent Squid  with using the routing rules on shorewall (tcrules) for hosts / networks (LAN) with multiples providers (WANs) directly from the internal network on port 80 (with TPROXY transparent squid or REDIRECT). On this issue, the routing rules is not work propertly because the source is the

Sir, I am very new Tc ...Kindly help.. I have to distribute 2 MB to 300 users... Browsing should be very good... Squid & Caching Name Server increases the browsing experience visibly. I need a script 1. All HTTP traffic is redirected to Squid. ( I will use Iptables to redirect and delay pools to limit per user bandwidth/total

Guys All the recent discussions recently, and the knowledge of a 2.6 port, of WRR has made me very keen on trying it. I had a look at the docs and examples know but my mind is not in a very receptive state. Take this simple example. Incoming internet connection of 1mbps. Shared between up to 25 users simultaneously. I know that WRR can fairly distribute the traffic amongst the currently

List Out of interest, I use transparent squid proxies for caching websites, and I shape the clients that browse the net, this all works perfectly so no questions in this regard... CLIENT <--- eth0 ----> SQUID <----- ppp0 -----> NET What I just realised was that all egress traffic on eth0 gets shaped, squid gets data from ppp0 and hence is not shaped. Does this mean that squid

I''m trying to get TPROXY / Squid running and I have a few questions... I found this page: http://www.shorewall.net/Shorewall_Squid_Usage.html#TPROXY However, it doesn''t explain what I''m seeing in the configuration. For the zone file, do I keep my loc and net configurations and just add the following to the file? - lo - - or do I remove the loc and net zones and

Guys Considering the festive season is upon us, thanks to everyone contributing to the list and helping all the readers with your great input! I don''t want to mention names, I''ll most certainly leave someone out. With this mail I''d like to test some theory on bandwidth management, with my own successes and failures during the past year. Sharing a link between 200

Hi Every One, I am using Linux 2.4 with 8390 Network driver. For configuring rshaper in one of the manual i have studied that need to insert the following line in Global space of Kernel. int (*net_shaper_rx_hook)(struct sk_buff *skb) = NULL; Can you suggest me anyone steps to insert the line and where in my Linux System. I am very new to kernel part. I am very greatful to you if any one

Hi All, This is out of the topic question, but I''m hoping that you can help me. If for example I''m going to install a Fedora 4 64-bit with 8 to 12 Gig of physical memory, how much swap file of directory do I need to create? Thank you very much, Wennie

Hello Everyone! I am using shorewall-3.0.5 on suse linux. Recently we have implemented dansguardian running on 8080 and squid on port 3128. Previously (before dans guardian) masquerading was working fine but after the implementation of dansguardian masquerading is not working. My rules file has entry Previous entry was ACCEPT loc:192.192.192.3 net REDIRECT loc 8080 tcp

The problem is that I have only 2 ethernet adapters in my linux router, one of this adapter pluged to the LAN and the other is pluged to a HUB who have 2 routers DSL. Each DSL routers have an static ip and the solution that I found was creating an eth0 and eth0:1 but with this option I have any way to use the eth0:1 adapte... Any one knows a solution for this ? Regards.

Hello all, I have a small ISP and I work all my clients networks over a routed network (now I am using 201.35.16.0/24 and 200.140.222.128/25 for my clients). The gateway server of the ISP is capable of running a web-cache (only http) using squid but I dont want that my clients go to the internet with the proxy/cache IP. Like when they enter in this site www.meuip.com.br it shows

Hi to all For is just az concept question : There are a need to change something in Squid3 config when it are running in the same box as shorewall with 2 ISP ? I''ve been thinking in do this at home, as a proof of concept for future implememtations ... I allways use Roberto''s Debian package to implement Shorewall . Fábio Rabelo

Hi, I am not sure if this is the correct destination for this email question, so if not, please can someone direct me to the correct mailing list / user. I need to detect Skype traffic using (I think it can be done) IP2P.on a RH Linux 2.4.20 kernel as well as the later fedora platforms. We have built it into your kernel, but are looking for some help in the matching parameters for skype in

Gentlemen, First of all, I would like to thank everyone for your input in this mailing list. Every day I glean something new, which is really nice. I also appreciate the effort that some of you put into making tc and iptables work. Now, on to my question. I am running a home network that consists of about three computers, plus a VoIP box. I would like to use tc in order to give priority to

Guys Reading through my lartc mail, and thinking on how to tackle my next shaping solution, gave me an idea. I''d like to propose this idea for scrutiny and if it sounds viable I''ll definitely need to start developing in due time. For me in my day to day work with developing network application specifically geared for middle-tier ISP''s, and reading on other peoples

https://bugzilla.netfilter.org/show_bug.cgi?id=1310 Bug ID: 1310 Summary: syntax issue with tproxy Product: nftables Version: unspecified Hardware: All OS: Debian GNU/Linux Status: NEW Severity: normal Priority: P5 Component: nft Assignee: pablo at netfilter.org