similar to: Qos and bandwidth control

Hello all, I am trying to configure a linux box to make some QoS into my netowork and, at the same box, control my clients bandwidth. I have this classes created: ---------------------------------------------------------------- UP="eth0" # wan infocontabil DL01="eth2" # lan clientes $TC qdisc del dev $DL01 root 2> /dev/null >

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

Hello everyone. CONFIGURATION DESCRIPTION: I have a linux box doing masquerade for two lan''s. Here is a piece of mine network config: eth0 : ISP , one public ip address (DSL modem) eth1 : lan , private network address fe: 192.168.4.0/24 eth2 : wlan access point performing as lan2wlan bridge , private network addes fe. 192.168.67.0/24 This box use 2.6.20 kernel with iptables-1.3.8

Hi,lartc I used iproute-060110 with iptables1.3.4 on gentoo 2005r1 kernel 2.6.14-5. I find some error messages in system logfile: HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is big. Consider r2q change. tcf_action_init_1: successfull police HTB: quantum of class 20001 is big. Consider r2q change. HTB: quantum of class 20020 is big. Consider

Hi all! I''m trying to shape traffic in a dorm''s network (4 mbit symmetrical internet link, about 200 computers, heavy p2p usage). The router is a p4xeon running linux 2.6.9 with the qnet patches (http://kem.p.lodz.pl/~peter/qnet/). When I activate ip_forward I get >20% packet loss and a lot of duplicates. Any ideas? I attach my shaping script. Thank you very much in advance,

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi list, I''m trying to do qos based on HTB, in my linux box wich is my firewall and transparent proxy, and I don''t have the possibility to put other machine to make proxy. Well, If I up my htb scripts, the proxy will be limited to serve my LAN as a external site and limited to the limit of 768kbits, even making two classes, tryn to limit it traffic to the maximun bandwidth

hello, I try to use layer7 filter to classify packets. I have a proble with http match. This protocol seems to work well with l7-filter (http://l7-filter.sourceforge.net/protocols) but for me nothing is filtering in http class. Someone can help me ? Here is my script : #!/bin/bash IPT_BIN=/sbin/iptables TC_BIN=/sbin/tc INTER_OUT=ppp0 LINK_RATE_UP=1000Kbit RATE_ACK=200Kbit RATE_DEFAULT=100Kbit

Hello all, As I have promised I am sending my QoS rules. This now works fine with u32 classifier (and parent 1:0 that I could not understand why it did not worked well before). Att, Nataniel Klug ------------------------ #!/bin/sh #------ # Script de QoS Cyber Nett #------ # Nataniel Klug # suporte@cnett.com.br #------ TC="/sbin/tc" IPT="/usr/local/sbin/iptables"

Hi, Thanks for the reply. Mohan Sundaram wrote : > mark in iptables and use tc to classify using mark. Mark like this ? iptables -A INPUT -m layer7 --l7proto bittorrent -j MARK --set-mark 3 and then.. tc filter add dev eth0 protocol ip parent 1:0 1 handle 3 fw flowid 1:10 and lets say we have a flowid 1:3 declared to use at 60kbit ceil 60kbit Is that proper ? If so then it

I need to shape traffic from some IP on one LAN, but I''m in trouble. There is a linux 2.4.26 connected to the Internet (eth0) / LAN(eth1) doing NAT. I''m using VLANs in the LAN Interface, that is connected to a 3Com SuperStack II in a 802.1Q tagged port. I want to create a class that will limit the traffic at 384Kbit/s. I want to create two leaf classes that limit the traffic at

Actually i gave up, i tried and tried and tried so many times, upgrading software falling back to an old version but it didn''t work, that''s it. i can''t do work together tc with iptables and iproute2 when i mark a packet with iptables tc doesn''t recognize them so it falls at the default leaf of the tc''s tree what i like is to mark packets depending on

----- Original Message ----- From: Michał Joachimiak To: lartc@mailman.ds9a.nl Sent: Tuesday, July 20, 2004 3:45 PM Subject: HTB - Really Big problem Hello everybody! Since week i dig lists and www and can''t find solution for my problem. I''m using HTB 3.13 kernel 2-4-25 smp iptables 1.2.9. I''ve got situation like this: LAN------Linux Box(routing only)------- Linux

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hey all. I''m trying to set up QoS using the HTB qdisc in a very basic setup, but it the example shown in the howto doesn''t seem to be working. While the packets show up in the correct classes, they appear to be completely ignoring the rates, meaning nothing gets shaped. My setup is that I''ve got a a bunch of machines behind my firewall/router: 1.2.3.1

Hi all, ive got 2 internet connections set up via the nano howto (which are working great) and we are running NAT. Was looking in to qos mainly to stop large http downloads/ftp downloads from hogging the line so that browsing for other users doesnt slow to a crawl, but if the line is free and no one is doing anything then for it to use the available bandwith. The wondershaper sounded exactly what

Hi all, Here is a RRD graph ive just made of my packet shaping setup: http://www.overclockers.com.au/~mwp/temp/tc-1hour.png The app creating the P-25 traffic is bittorrent on the Linux box also doing the shaping. P-22 and P-23 is created by FTP transfers. Starts with bittorrent running. At 00:03, an FTP transfer is started on "cool.comp" (windows box). At 00:09, bittorrent is