similar to: Gred/dsmark/htb

Hi i have configured my server with cbq and gred. The problem is that the cbq doesnt drop packets. The cbq is configured at a rate of 500Kbit "qdisc cbq 4: rate 500000bit (bounded,isolated) prio no-transmit Sent 100103048 bytes 73933 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 24000 undertime 0 " The traffic that being generated is more than 5Mbit with the

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

I ''ve been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn''t use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them. Tomas Graf suggested to use the tc_index index of u32 classifier so dear Sant .. i am currently with the following scripts that works! But when i try to add an HTB before the

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Is there any grapical interface for the QoS (Quality of Service) Traffic Control in Linux ? Greetings. - --- Carles Xavier Munyoz Baldó carles@descom.es Descom Consulting Telf: +34 965861024 Fax: +34 965861024 http://www.descom.es/ - --- -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8

Im using a Linux machine with standard pc hardware with 3 seperate PCI network interfaces to operate as a DiffServ core router using Linux traffic control. The machine is a P4 2.8ghz, 512mb RAM running fedora core 3 with the 2.6.12.3 kernel. All links and network interfaces are full duplex fast ethernet. IP forwarding is enabled in the kernel. All hosts on the network have their time sychronised

I want to set the DSCP field of the incoming packets. And then put them in the correct queues. I can mark the packets: iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1 tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8 tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw

Im experimenting with using a Linux machine with 3 interfaces to operate as a core router. All links and network interfaces are 100mbit. Below is a ascii diagram of the network. (network A) edge router ------>core router---->edge router (network C) ^ | | edge router (network B) I have tried two

Hi folks I have created a script file (dsmark+policing.sh attached) to check graphic an text outputs of simutations, against original examples/dsmark+policing coding (see TCNG Reference Manual-pg.90). It uses tcng coding (*.tcsim file attached) and old tc coding (*.tcsim_old file attached) inserted in tcsim files. Observation 1: The graphic outputs from (*.tc included in *.tcsim) and (*.tc_old

Hi, I want to setup core routers to do both DSCP marking and to get the DSCP and forward packets based on DS field. I don''t want to separate DSCP marking to be done only at the edge routers. I know that dsmark is both used for DSCP marking and for getting the DSCP and forwarding packets according to DSCPs. In my case, since I want to do both of these I need two dsmarks.(?) I am not

ALL: <<diffserv-gred_10-06>> I have attached the current script that I am using. $TC qdisc add dev $EDEV parent 2:20 gred setup DPs 3 default 2 grio $TC qdisc change dev $EDEV parent 2:20 gred DP 1 limit $lim min $minTh max $maxTh avpkt $avgPL burst $bursty bandwidth $netBand probability 0.02 prio 2 $TC qdisc change dev $EDEV parent 2:20 gred DP 2 limit $lim min $minTh max

I''m successfully using HTB + GRED to shape traffic based on the DSCP field. I would like to strip the DSCP and possibly replace it with normal ToS bits on egress traffic leaving my network. Leaving DSCP set is pointless, and could potentially cause problems with some ISPs that use DSCP internally I suppose. Setting ToS bits would seem ideal as most networks still honor it to varying

All: I am tasked with creating an environment in which DiffServ and IP precedence is handled as close to RFC specification as possible. I have a few problems with implementing this based on current queueing structure. Here are a few of my questions. 1.) Is there any way to get DiffServ AF drop levels without using DSMARK and GRED? Ex. AF11 Gred DP 1 AF12 Gred DP 2 AF13 Gred DP 3 2.)

Did anyone ever answer this one? THIS is what I am trying to do: >[LARTC] cbq+sfq and DSCP marking >Maria Joana Urbano stmaria@dei.uc.pt >Thu, 13 Feb 2003 19:29:42 +0000 > > * Previous message: [LARTC] Monitoring.... > * Next message: [LARTC] two routes 1 network card > * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] >

I have a Gentoo Linux (kernel 2.6.11) server. Several months ago, I made a traffic shaping setup for my box (running a 2.4 kernel then) that worked beautifully. It gave high priority to SSH and RealAudio traffic, and put HTTP downloading traffic on a lower prio so they could only use what bandwidth was left. However, I''ve only just realized that tc is no longer accepting the commands I

hai all i need to implement CBWFQ in linux As i wrote script in edge as: which mark the EF traffic ____________________________________________________________________-__ #!/bin/sh DEV=eth0 tc qdisc add dev $DEV handle 1: root dsmark indices 8 tc class change dev $DEV classid 1:1 dsmark mask 0x3 value 0xb8 # making two filters tc filter add dev $DEV parent 1:0 prio 4 protocol ip u32 tc

I ''m having a problem identical to one encountered on this list awhile back: >I''m trying to configure dsmark qdisc on 2.6.11.4 user mode linux and >tc from iproute2-2.6.11-050314. > > >I think I have some mismatch in my setup since adding dsmark qdisc >fails *unless* I specify "set_tc_index" argument which I believe should >be optional:

I''m trying to configure dsmark qdisc on 2.6.11.4 user mode linux and tc from iproute2-2.6.11-050314. I think I have some mismatch in my setup since adding dsmark qdisc fails *unless* I specify "set_tc_index" argument which I believe should be optional: # tc qdisc add dev eth1 handle 1:0 root dsmark indices 8 RTNETLINK answers: Invalid argument Mar 20 13:00:50 user user.debug

Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 10:30 AM To: lartc@mailman.ds9a.nl Subject: FW: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From:

hi all i am a new commer of linux community. i want to how does skb->tcindex value change exactly. it confused me indeed. i have a script reads: (1) tc qdisc add dev eth0 root handle 1:0 dsmark indices 64 default_index 0x161 set_tc_index (2) tc filter add dev eth0 parent 1:0 protocol all prio 1 tcindex mask 0xfc shift 2 pass_on (3) tc filter add dev eth0 parent 1:0 prio 1 handle 0x0a