similar to: Sharing a DSL between 40 subnets with htb

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Hi, Is it possible to attach another qdisq under a HFSC classfull ? I try it and the configuraton works : $TC qdisc add dev $dev root handle 1: hfsc default 30 $TC class add dev $dev parent 1: classid 1:1 hfsc sc rate ${RATE}mbit ul rate ${RATE}mbit $TC class add dev $dev parent 1:1 classid 1:10 hfsc rt umax 1500b dmax 30ms rate 200kbit $TC class add dev $dev

Hi When I list all the qdisc with tc command it is not possible to see the parent of the qdisc. An example by the book. # tc qdisc add dev eth0 root handle 1: htb default 30 # tc class add dev eth0 parent 1: classid 1:1 htb rate 6mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:10 htb rate 5mbit burst 15k # tc class add dev eth0 parent 1:1 classid 1:20 htb rate 3mbit ceil 6mbit

Hi list, I''m trying to do qos based on HTB, in my linux box wich is my firewall and transparent proxy, and I don''t have the possibility to put other machine to make proxy. Well, If I up my htb scripts, the proxy will be limited to serve my LAN as a external site and limited to the limit of 768kbits, even making two classes, tryn to limit it traffic to the maximun bandwidth

Dear All, I’m working with Fedora Core 3, kernel 2.9.1, MPLS-for-Linux-4.193, and having some problems when create a HTB queue. ALL packets goes to the default queue, they don’t care about any mark or ip field I use to enqueue them. : -/ That’s the deal, all packets that incoming the interface eth2 are classified and have theirs TOS field changed following some qos policy at the PREROUTING

Hello again, First, excuse me for my poor english. I''m trying now to make bandwith control in a firewall machine running Shorewall. This machine is also a bridge using bridge-utils bridge-utils-devel. It is a mandrake 10. The configuration is something like this: FTP/Webserver ------| eth0 eth1 Mailserver

Hello again, First, excuse me for my poor english. I''m trying now to make bandwith control in a firewall machine running Shorewall. This machine is also a bridge using bridge-utils bridge-utils-devel. It is a mandrake 10. The configuration is something like this: FTP/Webserver ------| eth0 eth1 Mailserver

Hello all, I am providing broadband service through DVB circuit. I have 4KB uplink and 32KB downlink. I want to share 32KB downlink bandwidth among 192.168.0.0/24 (20 users in this subnet i.e 192.168.0.2-192.168.0.22)subnet where each user will get 2KB to 6KB bandwidth. And from 4KB uplink bandwidth each users will get only 1KB to 2KB bandwidth.

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hi all, I''m trying to marking packets with iptables and use tc filter to catch this packets. I configure my device: tc qdisc del root dev eth0 tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 3000kbit ceil 6000kbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2000kbit ceil 4000kbit burst 15k tc qdisc add dev eth0

Hi! I have a setup where I want to prefer traffic on one port (for testing purposes I used port 22) my setup is : tc qdisc add dev eth3 root handle 1: htb default 30 tc class add dev eth3 parent 1: classid 1:1 htb rate 96mbit burst 15k tc class add dev eth3 parent 1: classid 1:7 htb rate 2mbit burst 15k tc class add dev eth3 parent 1:1 classid 1:10 htb rate 96mbit burst 15k tc class add dev

Hello, I use rrdtool to graph the traffic in the different classes on an interface, eth1. Basically, I use the output from tc -s qdisc ls dev eth1 my tc script (which is only for testing the graphing) looks like this: /sbin/tc qdisc add dev eth1 root handle 1: htb default 20 r2q 1 /sbin/tc class add dev eth1 parent 1: classid 1:1 htb rate 200kbit burst 15k /sbin/tc class add dev eth1 parent

Dear List, I am a tc newbie, and I''ve been working through the LARTC HOWTO to try to understand how qdiscs, classes, and filters fit together. I was confused by the example in section 9.5.5.1 (see excerpt below). I thought that classes were could only be attached to qdiscs (classful ones). In the example, however, classes are being attached to other classes. Can anybody explain to me

Hi everybody! I''ve been trying with htb and tc filter. It seemed to work fine, but after testing with ethloop I''ve realized that traffic is not being distributed through the leaves as I thought. When sending packets to 1:10 and 1:11 at the same time, there''s no bandwidth sharing. There''s no traffic through 1:11 until traffic through 1:10 has finished. Though

Hi, I''ve try to use htb to limit outgoing traffic but it seems that it doesn''t work. I guess the probem is the filter. Here is my script. #!/bin/sh echo "Add root qdisc, default traffic go to 1:30" tc qdisc add dev eth1 root handle 1: htb default 30 tc class add dev eth1 parent 1: classid 1:1 htb rate 100mbit burst 15k tc class add dev eth1 parent 1:1 classid 1:10

I''m using a fairly large number of classes, andf borrowing is not working as expected... I''ve called this setting it up on an IMQ device with speed 1200/256 on a 1536/384 line. I''m then throwing a UDP data transfer at it that gets tossed in one of the class under parent 1:6. The classification is working fine, but when I try to ping out, ping times are in the 900ms

Hi, I´m shaping traffic using htb on both interfaces, I noticed that shaping download traffic is workinggreat but shaping upload traffic is not working at all (no sent packets, no dropped, no overlimits)I have eth0 facing the backbone and eth1 facing the LAN. Thanks for your help.These are the commands I run:tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc

Lartc readers I have a peculiar problem with shaping and firewalling. My tc rules work great, below is a smaller version: #Root tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 100 #Root Class tc class add dev eth0 parent 1: classid 1:1 htb rate 1024kbit quantum 20000 burst 15k #Class for each user tc class add dev eth0 parent 1:1 classid 1:2 htb rate 32kbit ceil

Hello! I have a problem with i detalied in an early mail but there was no answer so i will try to be more specific. i have this tc class add dev eth0 parent 1: classid 1:1 htb rate 64kbit ceil 256kbit burst 15k quantum 1500 tc class add dev eth0 parent 1:1 classid 1:100 htb rate 32kbit ceil 256kbit burst 15k tc qdisc add dev eth0 parent 1:100 handle 100: sfq perturb 5 quantum 1500 tc