similar to: TCNG question

Hi all, Can someone please help with a tcng setup? I have played with tc and tcng in the past, and now would like to get some serious rules in place. However, I have a difficulty in setting them up. My setup is as follows: One machine working as a firewall: eth0 is the interface connected to a 512K DSL line eth1 is connected to a LAN eth2 is connected to another LAN, a bit like a DMZ eth1 and

Hello all, I am trying to set up a simple htb based system, where packets with source ip 10.0.0.1 should have their own class. I plan to use tcng to set it up easier. Is there something wrong in my tcng file ? ~/tcng$ cat htb /* */ #include "fields.tc" #include "ports.tc" dev eth0 { htb ( ) { class ( rate 600kbps, ceil 600kbps ) {

Hi, I have several users on the lanside each allocated separate IP addresses. I need to allocate th traffic to each IP addresses certain portion of total uplink. Say, 192.168.0.2 rate 128kbps, ceil 128kbps. 192.168.0.3 rate 65kbps, ceil 128kbps 129.168.0.4 rate 64kbps, ceil 64kbps. and so on.... Also, for each user i would like to prioritize the traffic within the allocated bandwidth. say for

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

Thank you for your help. It generates this script : tc qdisc add dev eth0 handle 1:0 root htb default 2 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 75000bps ceil \ 75000bps tc class add dev eth0 parent 1:0 classid 1:2 htb rate 125000bps tc filter add dev eth0 parent 1:0 protocol all prio 1 u32 match u32 \ 0xa000001 0xffffffff at 12 classid 1:1 But I thought it was necessary to

Hi all, We have 2 class C networks that are connected by a Linux router with the internet. We want to apply traffic control (bandwidth control). For that we wrote the tcc script below. We have 2 problems: 1. To establish a 2 megagit download we must actually set the value to 2500kbps. Is there a possible reason for that? 2. If we enable the WAN device we get very hight ping times (they change

Hi all, I have read the larc howto and I need to apply a traffic shaper with this configuration: router / two interface etho and eth1 lan lan is on eth1 and on eth0 I''ve the dsl connection (1.2 Mbit / 256 kbit) I need to limit the bandwith towards lan and I''ve thought at HTB and tcng. I write the script belove. I want limit the p2p and ftp (ssh and irc) connection at 15

I can''t seem to match packets less than 512 bytes: class( <$bulk> ) if tcp_dport == 81 && !( ip_len & 0xfe00 ) ; or if tcp_dport == 81 && ip_len < 512 Both rules match any packet I send to port 81, even when the total IP length is much greater than 512 bytes: class htb 2:4 parent 2:1 leaf 5: prio 1 rate 8000bps ceil 24000bps burst 6Kb cburst 1839b Sent

Hi, I am new to traffic control in linux. However, i have able to grab many new knowledge in recent days. I find tcng somewhat easy to use (although lack proper doc. of its usage). I want to control traffic of several IP Addresses connected to my LANSIDE. What I want is , i want to separate certain bandwidth to all my clients. dev "etho" { htb() { class ( rate 400kbps, ceil

Hi, I try to shape my incoming traffic. I have 2MBit/s DSL bandwith and the following ruleset (on the internal interface): $INT="eth1"; $INT_NET=192.168.1.0; $MAX_IN=2Mbps; dev $INT { egress { class (<$int>) if ip_src:24 == $INT_NET; class (<$ssh>) if tcp_sport == PORT_SSH; class (<$smtp>) if tcp_sport == PORT_SMTP; class (<$http>) if

Hi all I started playing with tcng to generate my tc rules, but I have some difficulty implementing my rules... The script below generates an error: # Device eth0 tc qdisc add dev eth0 ingress beginner.tc:2: don''t know how to build meter for this The script is below, I changed the real IP numbers for XXs and YYs, since it doesn''t really matter what they are. eth0 is the

Greetings all, OK - just started playing around with traffic shaping - have imq and htb and (I think) everything else I need in the kernel and running well. My initial lab task was to protect a H.323 session over a simulated half T1 while adding bulk traffic - got that accomplished after slogging through learning tc and decided in short order that a more intuitive interface would be

Hello Mailing list, I have a problem with the prio qdisc and I don´t know what is wrong in my configuration This ist a sample configuration and looks like this: #include "fields.tc" #include "ports.tc" #define X16(i) i i i i i i i i i i i i i i i i dev ppp0 { dsmark { prio(bands 6, priomap X16($be)) { class if ip_proto == IPPROTO_UDP;

Hello every one! I''m making a project to a discipline in the university and the project is make a Linux router that grants QoS to Multimedia connections (the prof. say we can use Open Source Soft. :) or reinvent the wheel). I have been googeling and googeling and i found the l7-filter in source forge and the spectacular simple language that is TCNG. Well the problem is how can i

Hi all, I have a little problem with my home-made slackware linux server. Here is the scenario: 1. I have a local wifi network 2. my server do masquerading and exit in internet via a PPPoE connection Goals: 1. not use SQUID 2. shaping the traffic with classes 3. emule connection must have minimum priority and a band-limit of 10KBytes/s in uplink (server--->internet) Any idea? Thx, Diego --

Hello List, I''m new to QoS/tcng/HTB and friends, so please forgive me if my question might be silly... After having read lots of HowTo documents I''m totally confused... The Challenge: ============== I''ll have to deploy several "mirror" download servers (Linux) which must be able to handle a huge number of HTTP download requests (about 10k to 20k unicast

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

Hi, I''ve been migrating an existing htb-based traffic shaper from a hideous (I''m allowed to call it that - I wrote the damn atrocity myself) tc shell script into a TCNG configuration file, and after a few false starts I think I managed to get the syntax right. However, during tests it looks like some of the tiers aren''t passing their restrictions on to lower levels.

How To Installing tcng at slackware 10.1

Help! I can''t get TCNG to compile!!! It did this on 2 different machines! Here are the errors: -------------------------------------------- Kernel: 2.4.22 [root@localhost tcng]# uname -a Linux localhost.localdomain 2.4.22-1.2149.nptl #1 Wed Jan 7 13:08:26 EST #if KFULLVERSIONNUM >= 0x20416 /* gratuitous interface change in 2.4.22 :-( */ ERROR: ake -f Makefile.unclean tcsim make[2]: