similar to: problem with multi gatway routing

hi all, first i wann to explain my network & it''s problem, i am using a redhat el5 for multigateway routing, i have 3 adsl lines which is connected with eth0, eth2 and eth3. eth1 is my local network. those 3 lines comes with adsl modem from same isp with equal bandwidth (512 Kbps). In this adsl modems there is one lan and one wan port, adsl modem''s lan ip is gateway for my

hi currently i am using redhat enterprise linux 5 for multi gateway routing with 5 internet connection on static ip and all is working fine, now i want to use 5 adsl lines with dynamic ip but there is no doc. in lartc and in nano''s how to for dynamic ip, so can u plz help me out thanks in advance nilesh chouhan __________________________________________________ Do You Yahoo!?

Hi All, I''ve configured a mutlipath as detailed in the HOWTO. For the most part it''s great, but when the cheap DSL line drops it''s connection, as it regularly does, the outbound routing doesn''t automatically use the remaining path for internal outbound traffic. Ip route show lists no default route once the default path dies, and if the ppp connection is

Hello folks: I am trying to set up a router machine to handle all my network connections to the internet and my local network. I have five interfaces in total, three to ISPs (two adsl and one cable) and two interfaces to my local network one to a switch and one wireless card. I have some of the routing working acceptibly but another portion I cannot get working not matter what I''ve

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip

Hello all, I need to put an IP alias to the same ethernet card, like this: eth0 - IP1/MASK1/BROADCAST1 eth0:1 - IP2/MASK2/BROADCAST2 In this box I will have another card that conects to a LAN netowork. I need this two alias in eth0 becouse I have two routes do take, but it seens to do not work. This is the script I am using (this scripts works fine when I have two ethernet cards

Hey, I''m trying to set up a Gentoo box to replace an aging BSD box here. The BSD box is running packet filter and I have it set up to take all data and route it to one of six sattelites. I have come up with the following config, but unfortunately I have no real way to test it short of switching the satellites over to the new system and prayer. The setup is: 192.168.252/22 - The LAN

Hello folks: This may have been discussed many times before but I have not been able to find it. I have also not been able to resolve it myself so I am asking here with hope that someone can straighten me out. I am using ip to do multisource policy routing or two connections to the internet. I have a linksys wrt54gs route which connects two machines by wire through the switch and three

Hello, I am trying to make a load balance at my box using two conections. I have compile my kernel with this patch routes-2.6.13-12.diff (tha I get from this website: http://www.linuxvirtualserver.org/~julian/#routes). The problem is that when I try to balance using weight sintaxe (i will put the script bellow) some conectios just drop. So I can enter some pages but other I could not...

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

Hello Im having a problem similar to sawar Here is my configuration --------------eth1---192.168.1.128---------- -------------192.168.1.1 ISP router 1 | my | ---Eth0---192.168.10.157----| | | linux |

Hi! I had two uplinks till today. We stopped one of them today, so i thought i could share my experience. (it is maybe useful for somebody) I hadn''t managed to configure it using a LARTC howto, but the Nano-howto (http://www.ssi.bg/~ja/nano.txt) and julian''s kernel patches. I had some problems with icq connections, because it is a two step connection (It is just theory). 1.

Hi. I´m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to ''equalize'' the the two internet connections with the weight=1 it doesn´t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don´t. example: ip route add default equalize\

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

I am relatively new to iproute2. Any information on the topic below would save me considerable time. I appreciate any help, thanks. We want to plug two lines into a webserver to increase the bandwidth available to the hosted sites. Rather than use round-robin DNS we would prefer to use iproute2 to use equal cost routing across the two lines. However, I am still not sure how well that will

Hi William. Thanks a lot for your help. Im having some trouble recompiling my kernel after a installed the patch. Im running RH 7.3 with kernel 2.4.18-3. The patch I installed is routes-2.4.16-6.diff. I got no errors installing it. I added the multipath support, and recompiled it. The make dep and the make bzImage went fine. I got error during the make modules. These are the errors:

Hi guys, I have a mail server running qmail with two network interfaces. All packages comes from the first one and I want to mark outgoing packages to route them using the second interface (ADSL). I have write this script, but it ins''t work. All packages are returning by the first interface... :-( x-x-x # Tables, networks, interfaces, addresses and gateways IF1=eth0 T1=100

Hi, this might be a dumb question, but I''m not finding much information online. I''m trying to setup a 2.6 linux box to run nat across multiple upstream links as a simple way to aggregate bandwidth. I found the instructions in lartc section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) fairly clear and straightforward. I implemented those, and a couple of trivial

Hi, I read the howto of iproute, I have the same case with HOWTO, the difference is that the whole incoming traffic goes through interface 0, the other difference is that I do not want to balance the out going traffic, because I have specific networks to take it throughout another interface. Mi Case IF1 --> Input and Output IF2 --> Only aoutput for three Network I need Help, How can I