similar to: iptables CLASSIFY and MARK not working?

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Hello I have few questions regarding tc functionality (qdiscs, classes, etc.) when vlans are in use. For example, consider interface eth0, for which I create and extra vlan with vconfig, let''s say eth0.11. Then using tc I can add usual things - qdiscs, filters, ... - to both eth0 and eth0.11. The questions are: - on which interface - virtual or real, should I actually use tc ? Or

Dear Community, sorry for the somewhat dumb question. Maybe someone has any pointer to how to setup the RED queue to mark pakets with ECN. In particular what are appropriate parameter settings for limit, min, max, etc. All my trials end up with either "RTNETLINK answers: Invalid argument", although the command line (at least for me) looks fine in regard to what is said on the

Hi all, First, let me say I''ve been most impressed with how quickly and professionally people on this list ask and answer questions. Next, let me say that with which I need help is properly configuring strict PQ, and gathering certain stats. Specifically: - I need to create a priority queue with four queues (let''s say they are of high, medium, normal, and low priority) - I

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hi folks...!!! I need to generate qdisc statistics to show my 4 class (10, 20, 30, 40), i`ve all working with HTB and so on, but i need to graph this results e.gwith RRDTOOL. I found a script made in perl, that can to graph my 4 class, but i need to know which IP address on my LAN are using the bandwidth too, in other hand i need to classify the traffic by IP to show. This is an out of my

Dear all, I''m having real problems getting tc to do anything useful at all. I''m also under pressure to get this fixed before the students start arriving later this month (I work in a university). In short, I want each IP address to be hard limited to 128kbit down, 64kbit up, never to be allowed more bandwidth than this. It is also important that the latency remains

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

Hi, I have a server and ten clients in a Gigabit network. The server has 125mbps network bandwidth. I want that the server has 40Mbps bandwidth reserved for client 1 (IP 192.168.5.141), and the rest bandwidth is for all other clients. My script looks like this (I use IFB for incoming traffic): #!/bin/bash export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: htb default 30

Hello. I have a linux server connected to a gigabit lan, and though that lan to a 768kbps/768kbps DSL modem. I''m trying to shape my webserver running on port 80/443 down to 512kbps, while leaving all other ports alone. The current configuration script that I''m using is as follows: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 99 tc class add dev

Hi, What exactly are the "tokens"? I thought each token allowed the sending of one byte, that tokens are stored in a bucket that can hold a max of "burst" tokens, and that this bucket is filled with tokens at "rate". But theory does not seem to explain the "tc -s .." output in the examples below. And I can''t figure out why or how... #tc qdisc

Hi to all of you!!! I am a Computer Science student trying to do the pre-grade thesis. I am trying to develop a free software tool to help administrators to control the traffic. Right now this tool is based on tc and iptables. I am having some problems trying to understand tc and tc examples: - Why in almost every list of tc rules based on htb class, there is a "tc qdisc dev ... root ...

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

Greetings - I''m new to QoS, so please be gentle (and yes, I''ve RTFM, though I don''t understand every bit of it) Here''s the thing; I''ve tried several scripts--simple and complex--for classifying my Vonage traffic into a high-priority queue, but no matter what I do it doesn''t seem to work. Right now I''m using the HTB script

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

Hello, I have a problem with simple traffic shapping in shorewall, my current configuration is: zones vlan10 ipv4 # interfaces vlan10 vlan10 detect tcpflags,routeback shorewall.conf TC_ENABLED=Simple tcinterfaces vlan10 Internal 1mbit:50kb shorewall show tc Device vlan10: qdisc prio 5: root refcnt 2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1

Hello, I''ve got somes questions about Bridge and QOS ... I''ve got a serveur with 2 interfaces eth0,eth1 inside br0 bridge ... nothing of special ... If I understand all, normally I should configure TC class and qdisc on each physical or use ebtables to manage packets on output ... right ? I''ve attached my qos_script that hsfc and layer7 module. I use only Iptables