similar to: Settings DS field: Does it make sense?

Hi all, Another requirement we have is that traffic entering the DS domain be classified then subsequently assigned a (different?) DSCP based upon its classification. For illustrative purposes only let''s say (for traffic entering the DS domain on dev eth0): - WWW traffic would be marked BE - traffic destined for 10.10.10.10 would be marked AF11 - VoIP traffic from 20.20.20.20 would

Hi I was surprised with size of Theora files and thought of feedback. Following 1minute duration Theora and Xvid files were made from a y4m file. The resolution is 1280x720: 1. Xvid 17MB 2. Ogg/Theora Q7 31MB 3. Ogg/Theora Q8 38MB 4. Ogg/Theora Q9 49MB 5. Ogg/Theora Q10 61MB The Xvid file was made using mencoder by 2 passes with following options:

Hi all I''m new to Qos and iproute2, but studied well the documentation. According to http://lartc.org/howto/lartc.qdisc.filters.html, catch all rule should be written as follows: tc filter add dev eth0 protocol ip parent 10: prio 2 \ flowid 10:2 But it doesn''t work because filtertype is missing. Can somebody please kindly explain how to write a catch all rule? Many

Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 10:30 AM To: lartc@mailman.ds9a.nl Subject: FW: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From:

Hi all Tcpdump shows Kphone UDP traffic has not set as minimum delay traffic! This is a tcpdump from My-IP to Other-IP: 13:07:14.704501 IP (tos 0x0, ttl 64, id 813, offset 0, flags [DF], proto: UDP (17), length: 120) My-IP.32784 > Other-IP.10384: UDP, length 92 0x0000: 4500 0078 032d 4000 4011 0fce db4a 37e4 0x0010: d5ba 3e91 8010 2890 0064 50f7 8008 032e 0x0020:

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

It doesn't look like iopl() is working. I'm taking an exception on every IO instruction. inl(0xde04) = 00000100 eip:765e eax:0100 ebx:0000 ecx:0320 edx:de04 esi:03f5 edi:0087 ebp:0000 esp:6b62 cs:c000 ss:c000 es:0000 ds:c000 fs:0000 gs:0000 eflags:00000246 exception: code at 0x000c7661: 66 ef 5a 59 66 58 9d c3 53 bb 02 00 e8 5e ff 5b c3 53 bb 05 00 e8 55 ff 5b c3 53

Hi all I have the raw out put of a video camera in following format: mjpegb, yuvj422p, 1920x1080, 24.00 fps(r). I cannot directly convert this raw footage to Theora due to the YUV4MPEG2 only restriction of the encoder_example. Isn't it better to support other raw formats in encoder_example, such as what I have, mjpegb, yuvj422p? I presume even if I convert the mjpegb, yuvj422p to

Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 9:35 AM To: lartc@mailman.ds9a.nl Subject: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Jody: I don''t know if you answer basic HTB questions but I''l try anyway. I''m implementing AF and EF with a

Im experimenting with using a Linux machine with 3 interfaces to operate as a core router. All links and network interfaces are 100mbit. Below is a ascii diagram of the network. (network A) edge router ------>core router---->edge router (network C) ^ | | edge router (network B) I have tried two

Hi Could I know on i386 RELENG_7, what Makefiles install following header files: 1) /usr/include/bsnmp/snmpmod.h 2) /usr/include/bsnmp/snmp_mibII.h 3) /usr/include/bsnmp/snmp_atm.h Appreciate your reply very much. Kind regards Unga

Hi all Currently Theora video in Matroska is not supported by Mplayer. To enable the support Michael Niedermayer has made the following proposal sometime back: http://article.gmane.org/gmane.comp.video.mplayer.nut.devel/214 Appreciate if Theora developers could comment on that. Best Regards Unga ____________________________________________________________________________________ Get your

Hi all I'm trying to compile and install libvorbis 1.3.4 on Mac OS X (Mavericks). When try to run configure, it shows the following error: CC=clang ./configure? \ ? --prefix=/usr --with-ogg-libraries=/usr/lib \ ? --with-ogg-includes=/usr/include --enable-shared --disable-static checking for Ogg... no *** Could not run Ogg test program, checking why... The config.log shows:

Hi, I have one of those questions that I suspect is very simple, but hard to classify, so I have been searching for quite some time and am not able to find it. If I have a data frame and I want to change all the values of one of the columns to blanks, what is the syntax? I tried a few different spellings of Null, etc., but can't get it. Can someone please send me what I suspect is a one

Dear R users, my search for a possibility to convert a generated model into VHDL to program an FPGA has still no solution. The problem: caret -> training -> model -> model.rds -> model.xml (PMML) --?--> VHDL-Code --?--> FPGA The (simplified) task: A photo detector with 16 channels is measuring the intensity of 16 different wavelength ranges. These data are classified with the

Hello! In our experiment, we are trying to mark IP packets at a source host. Some of these packets have a 28-byte "IP Options" field, hence a 48-byte IP header. We observed (using ethereal) that the tc script at the source appropriately marks the packets that DO NOT have an "IP Options" field (i.e., regular 20 byte header), however, all the packets with the "IP

CentOS-6.6 tmux-1.6 (epel) Twice now I have experienced the situation where upon exiting from a tmux initiated session on a remote host instead of returning to the originating session I see this in the session terminal display: <pre> ????????????????????????????????????????????????????????????????????????????????

Hi, I am trying to set-up the Open SSH. I want to connect to my Unix systems from Windows or from any other Unix system by using DSA public and private key without password. With this I can run the scripts on the remove system and use the scp etc on remote system. Can you please help me to configure this system. I don't know how to set-up this. I am getting the following error

Hi All, I am using ksvm method in kernlab R package for support vector machines. I learned the multiclass one-against-one svm from training data and using it to classify new datapoints. But I want to update/finetune the 'svm weights' based on some criteria and use the updated svm weights in the predict method framework. I don't know if its possible or not, how do classify new

Hi folks I have created a script file (dsmark+policing.sh attached) to check graphic an text outputs of simutations, against original examples/dsmark+policing coding (see TCNG Reference Manual-pg.90). It uses tcng coding (*.tcsim file attached) and old tc coding (*.tcsim_old file attached) inserted in tcsim files. Observation 1: The graphic outputs from (*.tc included in *.tcsim) and (*.tc_old