similar to: Route cache

Hi, I regularly have errors (kernel: dst cache overflow) and crash of a firewall under Linux 2.6.17 and the route patch from Julian Anastasov. With rtstat I see that the route cache size increases regularly without never decreasing. I have this parameters: fw:/proc/sys/net/ipv4/route# grep . * error_burst:1250 error_cost:250 gc_elasticity:15 gc_interval:60 gc_min_interval:0

Hello, I hope i wont make it too complicated and sorry for my englihs... The company has multiple connections to the internet ADSL + CABLE + XDSL... and i only want to use two for load balancing for now. I have read the HOWTO and i got it up and working it works great but i still have a few questions if anyone could help! the setup is: ADSL on ETH0 and CABLE on ETH1 When i load balance on

https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=40 laforge@netfilter.org changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED ------- Additional Comments From laforge@netfilter.org 2003-02-03 16:49 ------- We haven't seen this

Just started getting this. I tried the following by adding it to my etc/sysctl.conf: net.ipv4.neigh.default.gc_thresh1 = 4096 net.ipv4.neigh.default.gc_thresh2 = 8192 net.ipv4.neigh.default.gc_thresh3 = 8192 net.ipv4.neigh.default.base_reachable_time = 86400 net.ipv4.neigh.default.gc_stale_time = 86400 That pretty much locked things up. Then I tried another googled solution: echo 256 >

I recompiled yet 2.6.19.1 kernel (using iptables with the same patches too). The configuration for this test is: 1) linux box with 2.6.19.1 kernel (SMP machine) with these patches/modules: a) l7-filter b) ipp2p c) connlimit d) set 2) 4 ethernet interfaces: a) 2 external (eth1 and eth3) interfaces with balanced links (as described in nato-howto) bridged as wan0

Hi, all When use Centos 6.5,kernel version 2.6.431, I have continuous messages of "Neighbour table overflow" in messages. I have modified the gc_thresh1(512) , gc_thresh2 (2048) gc_thresh3 (4096) in /proc/sys/net.. path, But the messages occurs occasionally. some forum saied: They are probably realted to a kernel bug where the thresholds are in fact only half of the value that is set.

What is the cause for such a message while running kernel 2.6.1 on RH9 ? Neighbour table overflow. NET: 282 messages suppressed. Neighbour table overflow. Alex Iruc _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I am getting below error on mailgw. it has 2 ethernets. eth0 is connected to internet, while eth1 is connected to LAN where there are about 300 PCs. Mar 12 09:14:00 gateway kernel: NET: 697 messages suppressed. Mar 12 09:14:00 gateway kernel: Neighbour table overflow. Mar 12 09:14:05 gateway kernel: NET: 660 messages suppressed. Mar 12 09:14:05 gateway kernel: Neighbour table overflow. Mar

Hey guys, I have several Linux routers in place at high-usage locations (student apartment complexes). I''m having trouble with some of the routers which use 6Mbit DSL lines as their Internet feed. The routers use PPPoE and perform NAT. During peak usage periods, the routers are dropping alot of packets. I''m lead to believe this is because there are too many active

Hi guys, Sorry if this is a little offtopic, but I was wandering what can one do to prevent/stop arp flooding ? Thanks, Alex -- This message has been scanned for viruses and dangerous content by LG-Network(http://www.lgnet.ro), and is believed to be clean.

Configuration: (2) Dual Core Opterons 8GB RAM Apache used to balance 40 mongrel instances We receive Application 500 Errors. Nothing suspect appears in the log, so we are at a lost as to what to do next. Any advice would be welcome and/or an explanation of what types of things cause Application 500 Errors in mongrel. Thanks! - Jared Brown -------------- next part -------------- An HTML

I''ve got a linux router pushing 600-1000 pppoe connections through it. I''m getting a screen error "Neighbor Table Overflow" after this box has been up for between 1 week and 1 month. When this is happening, routing slows to a crawl if at all. Then dies. I''ve added: # Added to stop "neighbor table overflow" messages in the kernel

Hey guys, I am planning to buy some components for a Linux router that will handle the Internet access of 200 computers (includes tc shaping) and some inter sub-network routing (at least 100MBps per eth - and there are 3 eth cards). I was thinking of a: Pentium 4 - 3GHz 256 or 512MB RAM Network Cards. Now - I wonder what is more important: the processor speed or the amount of RAM. And can you

what is the limit on the arp cache entires ?! Does someone have very big LANs with linux-routers ? How big ? (i mean flat L2 network, not segmented) I want to know how much can my net can scale ? thanx _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, I''ve setup a gateway using multiple default gateways and netfilter MASQUERADE to load balance traffic between two DSL interfaces and one dedicated link, and when I try to download something big, or when I''m using MSN (both in clients under this gateway), sometimes, or most times, after a while the connection timeouts. The connection doesn''t seem to change its

Hello, I''ve tried to change ipt_conntrack hashsize and con under my debian charge but doesn''t work ! Ive got 2876Mb available for conntrack so I''ve done (according to some previous mail and this http://www.wallfire.org/misc/netfilter_conntrack_perf.txt) CONNTRACK_MAX = 2876 * 64 = 184064 HASHSIZE = 2876 * 8 = 23002 But the near power of 2 is 2^16 = 131072

http://bugzilla.netfilter.org/show_bug.cgi?id=733 Summary: ipset restore won't restore from output of ipset save Product: ipset Version: unspecified Platform: All OS/Version: Debian GNU/Linux Status: NEW Severity: normal Priority: P5 Component: default AssignedTo: netfilter-buglog at

Dear Dr. Bivand and R-users, I have a 5 by 5 grid, say, location[1:5,1:5], and I want to know the indices of 8 neighbours of each cell. For example, for location[2,2], its neighbour coordinates are [1,1:3], [2,1], [2,3] and [3,1:3]. Sometimes I also need to remove edge effects (torus = TRUE). I have tried "cell2nb" function in your spdep package. Here's my example: > neigh

Dear all, I have imported a dataset from Stata using the foreign package. The original data contain French characters such as è and ç . After importing, string variables containing names of French departments have changed. E.g. Ardèche became Ard\x8fche. I would like to ask how I could plot these changed strings, since now the strings with special characters fail to be printed in the plot (either

Commit be55287aa5b ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj") introduced some new calls to the refcount api to the nv50 mapping code. In one particular instance, it does the following: if (!refcount_inc_not_zero(&iobj->maps)) { ... refcount_inc(&iobj->maps); } i.e., it calls refcount_inc() to increment the