similar to: Class C network 223.255.255.x

Hi Guys, I would just like to have advice and pointers of the best way would be, Someting like BGP or OSPF? I have 2 internet connections at diffrent locations. let say connection A and B 1.) router A has a fast internet connection and a seperate interface for clients using /lan/pppoe/ipsec etc and another ethernet interface going to router B 2.) router B has similiar setup as router A and

Hi, I am trying to do some simple ingress limiting based on fwmark. I know the ability and sense to do INGRESS limiting is ehm... limited ;-) but still I want to try it. I tried several things. === 1 === tcq ingress handle ffff: tcf parent ffff: protocol ip prio 1 handle 1 fw police rate 12mbit burst 10k drop tcf parent ffff: protocol ip prio 1 handle 2 fw police rate 10mbit burst 10k drop

Hi, I''ve been working for a big corporate company as junior system engineer and getting nicely to understand HTB/iproute2/iptables etc, The ordinary users(about 500 users), can pop / smtp / skype out on the network, but I can''t ssh out, cause they blocked the ports. Thought of being clever, I let my home linux listen on port 443 or 110 for ssh connection, but it wont connect, I

Hi There, We currently using iproute2 for load balancing. However we need more upload speed as we load balance over 3 dsl lines. I''ve been looking for a way to combine the upload speed to more faster. Found a site called www.upstreaminter.net where these guys bond the adsl channels to improve uploads, Since downloading is problem as its need to know the ip address of the downloader they

hello I'm learning mgcv and would like to obtain numerical output corresponding to plot.gam. I can do so when seWithMean=FALSE (the default) but only approximately when seWithMean=TRUE. Can anyone show how to obtain the exact values? Alternatively, can you clarify the explanation in the manual "Note that, if seWithMean=TRUE, the confidence bands include the uncertainty about the

Hi THere, sorry if this is a stupid question or does not belong to this forum. I''ve set my DEFROUTE=no in my ifcfg-ppp0 and when I bring the ppp0 up, it deletes my old default load balance routes which I do not want, as I just want the interface to be up, but not touching my default routes any advice Thanks SEW

Dear Contributors: I have the next matrix: "X" "Y" "Z" 1 2 526 2 5 723 3 10 110 4 7 1110 5 9 34 6 8 778 7 1 614 8 4 876 9 6 249 10 3 14 I want to order the matrix from bigest Z (1110) to lower Z (14). Then I want to asign a color scale vector from blue ( bigest Z) to orange

Hi, I've installed CentOS 5 on a Dell pe1950 with 2 dual port NICS. One of the NIC is an Intel and use the e1000 module. The problem is when the server is rebooted it does no asign the ethx name to the NICs, instead the so assign something like _dev377362... so i dont have networking on the server. Any ideas what is happening and how to solve it? Thanks. -------------- next part

Dear all, I have 3 backbones for my local network. 1st backbone: down 1024kbps, up 1024kbps through eth1 2nd backbone: down 2048kbps, up 2048kbps through eth2 3rd backbone: down 1024kbps, up 128kbps through eth3 Local network: 192.168.0.0/16 through eth0 Router: Linux Slakware 11 with iproute2 Please let me know how to shape both incoming and outgoing traffic for this case. LARTC doc only

Se ha borrado un texto insertado con un juego de caracteres sin especificar... Nombre: no disponible Url: https://stat.ethz.ch/pipermail/r-help/attachments/20080220/4ba85b57/attachment.pl

Hi, I'm inter-connecting AccessPoints using a tinc mesh and have bridge-nodes to bridge this vpn into some existing backbone. The AccessPoints bridge their users into 802.1q VLANs (per WiFi-Client, there can be multiple VLANs active on each AP) in the tinc mesh, and the bridge nodes bridge some vlans into the backbone. Now there is a router in the backbone that uses the same MAC on all VLANs,

Hi I have 2 question for you guys, 1. Which is the difference between this two methods? (select_datetime, datetime_select) 2. How I assign the selected date-time values, to an specific variable or array using select_datetime I know do it using datetime_select(''object'',''method'') I aprecciate your attention. Thanks PD: Sorry about my english.

On Fri, Aug 12, 2016 at 11:20:47AM -0500, Sergei Gerasenko via samba wrote: > It looks like this is a long known issue: > > https://bugzilla.samba.org/show_bug.cgi?id=10792 If by long known you mean "as designed". As Samba supports ACL setting on files/directories we don't restrict what happens to them after creation. For creation you can set "create mask" and

On Tue, Oct 1, 2019 at 8:08 AM Robin Kruppe <robin.kruppe at gmail.com> wrote: > > Hello Jacob and Luke, > > First off, even if a dynamically changing vscale was truly necessary > for RVV or SV, this thread would be far too late to raise the question. > That vscale is constant -- that the number of elements in a scalable > vector does not change during program execution

On Tuesday, October 1, 2019, Jacob Lifshay <programmerjake at gmail.com> wrote: > On Mon, Sep 30, 2019 at 2:30 AM Sander De Smalen via llvm-dev > <llvm-dev at lists.llvm.org> wrote: > > > > I've posted two patches on Phabricator to add support for VScale in LLVM. Excellent! > > > > A brief recap on `vscale`: > > The scalable vector type in

Hi, i try to etablish unencrypted onnection and have in my config: Cipher=aes But this causes the following error: 2018-05-23 12:08:27 tinc.backbone[14746]: tincd 1.0.31 starting, debug level 5 2018-05-23 12:08:27 tinc.backbone[14746]: Got fatal signal 11 (Segmentation fault) 2018-05-23 12:08:27 tinc.backbone[14746]: Trying to re-execute in 5 seconds... I have no idea what i'm doing

I have to provision several dozen * users to a seperate building on our campus in the same subnet. Ordinarily, I'd just run a gigabit cat6 cable to another switch if it doesn't violate the 100 metre rule, but this building is several hundred metres away from my backbone. My only option for cabling to the remote building is copper. My plan is to provision them with a Linux bridge with 4

Hi all, I was wondering whether there are any packages that provide for the Greenhouse-Geisser correction, an adjustment used in univariate repeated measures when the sphericity assumption is violated (both numerator and denominator degrees of freedom are multiplied by GG-epsilon, and the significance of the F ratio is evaluated with the new degrees of freedom)? I have seen a few emails with

Hello list and all, this is my case: 4month ago i joined new job with company: 400 employees, RHEL and CEntOS 6.5 servers in backbone (and some windows servers as app servers), with one Samba3 PDC fileserver/domain server with tdbsam backend for windows 7 workstations and NIS for Linux workstation and servers authentication... you can imagine this situation was a bit mess My goal was to

Hi I believe that whole question is in topic. Is there any way to recognize ( and then shape ) p2p traffic which is encrypted? Modern p2p clients have this ability moreover some of them have this enabled by default. Now I''m using ipp2p for iptables but as I know this doesn''t recognize encrypted traffic. Thanks in advance. Pozdrawiam Szymon Turkiewicz