similar to: Configuration of my QoS ruleset (now working fine with u32 classifier)

Hello all, I am trying to configure a linux box to make some QoS into my netowork and, at the same box, control my clients bandwidth. I have this classes created: ---------------------------------------------------------------- UP="eth0" # wan infocontabil DL01="eth2" # lan clientes $TC qdisc del dev $DL01 root 2> /dev/null >

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hello all, I am having some difficults to make a routing rule work. I want that every P2P packages go to one interface (eth2 - cheaper link) nad the rest of the traffic go to another interface (eth0 - frame relay very expensive). I am using this script to make the mark and balance: ------- #!/bin/bash IPT="/usr/local/sbin/iptables" IP="/sbin/ip" #---- # Declara redes #----

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hello all, I am trying to match some conections using u32 but I tryed this: [root@ns1 ~]# tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip src 0/0 match ip dst 0/0 match ip sport 80 0xffff flowid 1:10 RTNETLINK answers: Invalid argument We have an error talking to the kernel [root@ns1 ~]# I have this class at device eth1: [root@ns1 ~]# tc class show dev eth1 class

Hi all, i have a problem i have this topology 192.168.1.7 GW 192.168.2.252 link 1 ------------------------------------ link 2 | | eth1 PROXY eth0 192.168.1.245 192.168.2.245 The default gw of the PROXY is 192.168.1.7 and the link2 is a Secondary link that i need to go out to internet!!!! My internal IP of the network is

Hello all, After many time reading a lot of stuff I am quite confident using LARTC to route my trafic. I am still working on QoS (by package type and so on) but it will stay in my studing class for a long time... ;) So lets go to my question... I mounted a router that makes my conections throug 2 external interfaces. Its working fine and my default gateway for entire network behind

Oi F?bio. Pelo IP tamb?m n?o acessa. A minha suspeita de que era um problema ligado a interface est? errada. Aleat?riamente usu?rios nas duas interfaces perdem o acesso. Ainda assim, somente usu?rios com Windows XP tem esse problema. Vou testar suas indica??es. F?bio Rabelo wrote: > > > 2010/3/23 Leonardo Carneiro - Veltrac <lscarneiro at veltrac.com.br > <mailto:lscarneiro

Hello all, I need to put an IP alias to the same ethernet card, like this: eth0 - IP1/MASK1/BROADCAST1 eth0:1 - IP2/MASK2/BROADCAST2 In this box I will have another card that conects to a LAN netowork. I need this two alias in eth0 becouse I have two routes do take, but it seens to do not work. This is the script I am using (this scripts works fine when I have two ethernet cards

Hello all, I am trying to make a little bit more complex QoS/Shapping form and I need to shape a PPPoE conection that I serve to my clients. So this is the scope: client connects using pppoe so it gets an IP address (from pppoe pool) and open an interface into my linux box interface for this client is ppp0 client has got an ip 1.1.1.2/32 and it is poiting to pppoe-server 1.1.1.1 So,

Hello all, I have a small ISP and I work all my clients networks over a routed network (now I am using 201.35.16.0/24 and 200.140.222.128/25 for my clients). The gateway server of the ISP is capable of running a web-cache (only http) using squid but I dont want that my clients go to the internet with the proxy/cache IP. Like when they enter in this site www.meuip.com.br it shows

Hello all, I am still reading about my QoS rules and I need that one of my servers (that is into my LAN but has an routing ip address) did not get into the qos rules I have. So I want that all traffic coming or going to that specifc host did not get shapped by any traffic control and do not get even into a QoS class. How can I do this? Att, Nataniel Klug

Hello, I am looking for an answer. I am doind some thing like a loadshare betwen two backbones. To one of them I send all p2p, msn and irc packages and to the other one I send the rest I have. The problem I am facing is about prio at tables: ip rule add fwmark 1 table 201 prio 202 This is the rule I make. This is, I thinbk, working fine. The default gateway is set into table

Hello guys, I am still in doubt about this kind of server. So my question is about the "prio" at routing tables like: I have 3 tables in /etc/iproute2/rt_tables: 201 201 202 202 222 222 In table 201 there is the rules about my internet link (frame relay) that comes into eth0. So I made this route into it: [root@ns2 iproute2]# ip route show table 201 default via

Hello, I am trying to make a load balance at my box using two conections. I have compile my kernel with this patch routes-2.6.13-12.diff (tha I get from this website: http://www.linuxvirtualserver.org/~julian/#routes). The problem is that when I try to balance using weight sintaxe (i will put the script bellow) some conectios just drop. So I can enter some pages but other I could not...

Hello all, I am doing many trys on put a QoS Solution to work at my ISP/WISP. I have this network topology: router <> eth0.srv <> eth1.srv <> clients I just want to make that ALL http, mail, ssh and icmp traffic have preference in any instace. So, what I tryed to do was this: My link has 3096 Kbps upload and 3096 Kbps download (it is a ppp from a telecom) I

Hello all, I have this situation: eth0 - internet backbone eth1 - network 192.168.0.0/24 (clients) eth2 - network 192.168.1.0/24 (clients) My problem is that this two networks, one into each interface, need to share 256 Kbps. I could not make a way to shape this both networks becouse they are in different interfaces. Anyone knows some way to make it happen? Att, Nataniel Klug

Hello, Here is what I want to do: I have a patch that make me able to mark package by its nature useing layer 7. So I use this line to mark a packge (i will use msnmessenger like example): $IPT -t mangle -A POSTROUTING -m layer7 --l7proto msnmessenger -j MARK --set-mark 3001 Now I want that all packges with this mark get throu my gateway using the link at eth2 and all other packges use

https://bugzilla.netfilter.org/show_bug.cgi?id=821 Summary: Rosa Product: iptables Version: unspecified Platform: All OS/Version: All Status: NEW Severity: enhancement Priority: P5 Component: iptables AssignedTo: netfilter-buglog at lists.netfilter.org ReportedBy: andoandre at gmail.com