similar to: Another question (now about u32)

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

Hello all, After many time reading a lot of stuff I am quite confident using LARTC to route my trafic. I am still working on QoS (by package type and so on) but it will stay in my studing class for a long time... ;) So lets go to my question... I mounted a router that makes my conections throug 2 external interfaces. Its working fine and my default gateway for entire network behind

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hello all, I am trying to make a little bit more complex QoS/Shapping form and I need to shape a PPPoE conection that I serve to my clients. So this is the scope: client connects using pppoe so it gets an IP address (from pppoe pool) and open an interface into my linux box interface for this client is ppp0 client has got an ip 1.1.1.2/32 and it is poiting to pppoe-server 1.1.1.1 So,

Hello all, I have a small ISP and I work all my clients networks over a routed network (now I am using 201.35.16.0/24 and 200.140.222.128/25 for my clients). The gateway server of the ISP is capable of running a web-cache (only http) using squid but I dont want that my clients go to the internet with the proxy/cache IP. Like when they enter in this site www.meuip.com.br it shows

Hello, I am trying to make a load balance at my box using two conections. I have compile my kernel with this patch routes-2.6.13-12.diff (tha I get from this website: http://www.linuxvirtualserver.org/~julian/#routes). The problem is that when I try to balance using weight sintaxe (i will put the script bellow) some conectios just drop. So I can enter some pages but other I could not...

Hello all, I am still reading about my QoS rules and I need that one of my servers (that is into my LAN but has an routing ip address) did not get into the qos rules I have. So I want that all traffic coming or going to that specifc host did not get shapped by any traffic control and do not get even into a QoS class. How can I do this? Att, Nataniel Klug

Hello, I am looking for an answer. I am doind some thing like a loadshare betwen two backbones. To one of them I send all p2p, msn and irc packages and to the other one I send the rest I have. The problem I am facing is about prio at tables: ip rule add fwmark 1 table 201 prio 202 This is the rule I make. This is, I thinbk, working fine. The default gateway is set into table

Hello guys, I am still in doubt about this kind of server. So my question is about the "prio" at routing tables like: I have 3 tables in /etc/iproute2/rt_tables: 201 201 202 202 222 222 In table 201 there is the rules about my internet link (frame relay) that comes into eth0. So I made this route into it: [root@ns2 iproute2]# ip route show table 201 default via

Hello! I''ve read a lot of mail archives, but can''t find solutions for my problem. I have router with about 700 users. I''m using HTB with SFQ leaf qdiscs for every user (client ip). So, different IP can have its own rate limit. This scheme ir working fine for a long time. But how can I limit number of connections (sessions) from one host? I see from ip_conntrack

Hello al, Is it possible [indeed is this the right place] to add iptables to force all internet traffic to go thru a particular computer on a LAN? I have a 4 port Router/modem that contains a Busybox v0.61 Linux system. I am able to add entries to the iptables tho'' I don''t really know what it does yet. I want to be able to use Ethereal on this one computer to check what web

Hello all, As I have promised I am sending my QoS rules. This now works fine with u32 classifier (and parent 1:0 that I could not understand why it did not worked well before). Att, Nataniel Klug ------------------------ #!/bin/sh #------ # Script de QoS Cyber Nett #------ # Nataniel Klug # suporte@cnett.com.br #------ TC="/sbin/tc" IPT="/usr/local/sbin/iptables"

Hi, I have the following config: 1 PC with 3 NICs, that shares internet connection to LAN. eth0 uses a public IP ($public_ip_1) eth1 uses a private IP ($private_ip) eth2 uses a public IP ($public_ip_2) I have a webserver and a mailserver accesible by $public_ip_1 (eth0) I have a LAN with all terminals using private IPs, and $private_ip (eth1) as gateway. $public_ip_1 and $public_ip_2 are from

Hi, I have a client connected to the ''net through 3 ISP''s. Have set up a Linux box to do routing and load sharing for the 3 connections. A fourth interface is connected to the LAN with private IP addresses. Am using iptables to SNAT traffic to the appropriate IP depending on the interface the packet gets routed onto. The setup looks something like this: Interface IP

Hello, I have a data-set containing 22 variables, after appropriate transformations etc I ran a kmeans cluster analysis for 4 clusters , I ran it 20 times to find a result with the lowest within sum of squares. My question is how best do I go about finding out what the characteristics are of each cluster? Is one cluster dominated by a particular set of variables or by a particular

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1

the server is using CentOS 7 and that is the package that comes through yum. everything is up to date. i am hesitant to install a new package manually as that could cause other compatibility issues? is there another way to test the configuration on the server? On 21/10/2016 01:07, Stephan Bosch wrote: > Op 10/20/2016 om 7:38 PM schreef Matthew Broadhead: >> do i need to provide

do i need to provide more information? On 19/10/2016 14:49, Matthew Broadhead wrote: > /var/log/maillog showed this > Oct 19 13:25:41 ns1 postfix/smtpd[1298]: 7599A2C19C6: > client=unknown[127.0.0.1] > Oct 19 13:25:41 ns1 postfix/cleanup[1085]: 7599A2C19C6: > message-id=<edc55a9b-eb49-3945-dc60-0e1d51a78e97 at nbmlaw.co.uk> > Oct 19 13:25:41 ns1 postfix/qmgr[1059]: