similar to: FTP problem in Load Balancing.....

Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2

Dear Sir, Please help me in building the right solution. My requirement is: 1st I want to club both ISP bandwidth to get 512kbps. 2nd, In normal condition, it should be in Load balancing. 3rd , In ISP Failover condition, traffic will automatically route to working ISP. What I have: I have installed the RHEL 3.0 with 3 Network Card. Kernel is 2.4.21-9EL I have the link from two ISP both

hello list, I am trying to setup a PXE boot server. Below are the details of the server: OS : Fedora Core 5 32-bit DHCP : dhcp 4.1 TFTP : tftp-hpa-5.0 Number of NIC : 2 eth0 : IP : 192.168.100.17, Subnet : 255.255.255.0, Gateway : 192.168.100.1 eth1 : IP : 192.168.1.1, Subnet : 255.255.255.0, Gateway : 192.168.1.1 Client: OS : None, fresh machine Number of NIC : 2 Intel Gigabit eth0 of server

Hi, I am connected to two DSL providers (DSL 1 - 1Mbps downlink/384kbps uplink and DSL 2 - 2Mbps downlink/512kpbs uplink) I would like to only allow ftp, pop3 and http via the DSL 1 and only smtp, ipsec and pptp via DSL 2. How can I do so? Can I use iproute to route these protocols? Below is my ip routing: - # DSL 1 ip route add 2.2.2.208/30 dev eth0 src 2.2.2.210 table 1 ip route add

Hi, I have a cisco sdsl modem to connect to internet via eth1 (192.168.1.2) local is eth0 (192.168.2.254) default gw is 192.168.1.1 the cisco forwards all incoming ports to 192.168.1.2. I connect from outside on port 24562, login is successfull, the ftpserver gives back the external Ip of the cisco as pasv IP to the client (its a setting in the ftpserver). It gives an ip from the pasv range I

Hi, ok Im all new to this :-) for pasv ftp in your example you say for example to use ports 65500-65535, but i dont see that u open those ports in your example fw scripts..? any hints ? -- Christophe Zwecker mail: doc@zwecker.de Hamburg, Germany fon: +49 179 3994867 http://www.zwecker.de "Who is General Failure ? And why is he reading my disk

Hi guys, I am following this[1] tutorial to install clang. However, I have made a small change in the configure command, and I am running it with '--enable-optimized' option to avoid the debug build. I am getting the errors (given at the end) related to *undeclared identifiers '__NR_*'*. Can someone please provide some input about how to tackle this issue? On my other machine, I

I manage a small server that I back up weekly. I do this by making a tarball of relevant files then transferring it over the local subnet to my station (Fedora 11), whereupon I burn it to DVD. There is no optical burner on the server. The tarball amounts to a bit under 5 gigs. Recently I've started getting an error telling me to try PASV or PORT first. I use the gFTP client on my

I just installed CentOS4 on my main server. It runs proftpd and is not NATted.. When I did the install I said to allow FTP and HTTP. I can ftp from windows dos ftp client. In IE I get "Unable to build data connection: No route to host" ncftp I get.. Data connection timed out. Falling back to PORT instead of PASV mode. List failed. Wget and FireFox just time out. Anything I need

Manish Kathuria wrote: > Sandeep Agarwal wrote: >> Manish Kathuria wrote: >> >>Sandeep Agarwal wrote: >> >> >> >> >> >> I have gone through http://www.ssi.bg/~ja/nano.txt AND further >> >> http://www.ssi.bg/~ja/ & got confused in choosing the right patch. >> >> Please suggest if I will choose Jumbo Patch

I have Centos3.3 installed, vsftpd, apache2, ports 20&21 open on router, firewall disabled at this time : /etc/passwd looks like this --- ftpadmin:x:502:502::/var/www:sbin/noligin uncommented the lines in /etc/vsftpd/vsftpd.conf : chroot_list_enable=YES chroot_list_file=/etc/vsftpd.chroot_list I can access ftp from within network no problem, but using external ip it will validate login

Remote work possible. Location: Columbia, SC Duration: 12+ months Rate: $60/hr Daily Responsibilities: Ruby coding, using rails, testing, generating ad hoc reports for client as needed, providing daily status updates to team, Presence on internal IM system during work hours. Required Skills : RUBY, RAILS, GIT, MYSQL, CUCUMBER, RSPEC, JQUERY, EXCELLENT, LINUX, OS X, JSON, COMMAND

On 11/24/16 3:12 AM, Arnaud De Grandmaison via llvm-dev wrote: > > Hi Sandeep, > > The CMake version of the test-suite has been improved (see > https://reviews.llvm.org/D21360) so that it’s easy to plug additional > test suites. A starting point would be to look at how the > TEST_SUITE_SUBDIRS variable in the top level CMakeLists.txt is used. > I think this bug report

-----Original Message----- From: Ghosh, Sandeep Sent: Thursday, June 30, 2005 5:43 PM To: 'Berton Gunter' Subject: plot legend outside the grid Thanks for the pointers... I managed to get everything to look and feel the way I want except for the legend to plot outside the grid... Thanks for the note on the par, but I'm not able to it to plot outside the plot grid.. dataFrame <-

Done! Sandeep, this is really a great change. I had seen the discussion of it but hadn't looked at the details until now. Thanks a lot for contributing this. While I was reviewing it, I found some a few small nit-picky things to clean up (mostly in comments and whitespace). Sorry -- I'm a bit compulsive that way! I will commit those changes in a few minutes. Other than

On Apr 16, 2009, at 2:52 AM, Sandeep Patel wrote: > After wasting an inordinate amount of time trying to get test-suite to > run on arm-apple-darwin so I could reproduce your results, attached is > a patch that fixes the small copy&paste error of having 8-byte > alignment for stack-allocated f64s instead of the proper 4-byte. I've > updated the patch to the top of trunk

Hello, On Mon, 17 May 2004, Charles-Etienne.Dube wrote: > I did some tests with 2 cable modems, but now it is installed in a production > environment with 4 cable modems. At first, everything seemed to work fine.. > But now I had a couple of users tell me that some web pages were > not available while others were, and it semms to be a masquerading problem > since when I

Hi, My requirement is something like as given below, a.c => a.obj contains a1() and a2() function b.c => b.obj contains b1() and b2() function main.c => main.obj call to a1, a2, b1, b2 Now, I want to move a1(), a2() from a.obj to b2.obj and on top of function b1() When I call b1() from main, it should call first a1, a2 and then function definition of b1 Can you please give me some

Dear, i using this scenario. jitsi---> asterisk---->EPABX------> Local Telephone when i am calling from jitsi to no 88 its giving this message and getting busy tone. == Using SIP RTP CoS mark 5 -- Executing [88 at myphones:1] Dial("SIP/sandeep-00000004", "DAHDI/g0/88,20,rt") in new stack -- Called g0/88 [Nov 15 09:53:54] WARNING[3169]: chan_dahdi.c:7536

On Tue, Apr 28, 2015 at 7:14 PM, David Blaikie <dblaikie at gmail.com> wrote: > I believe duncan's fixed this recently in 235956 and 235955 - does ToT work > for you? It seems like r235955 might have fixed it. However I'm having build issues with ToT in my environment. Is this the right place to check ToT build status: http://lab.llvm.org:8011/one_line_per_build > > On