similar to: urgent probllem

Greetings, My question deals with the htb version of wonder shaper. I used it for some time without much alteration except I noticed something odd in the way the rates are set up for the 3 htb classes. The way I understand it, there are 3 classes: 1:10 - high prio class with rate ${UPLINK}kbit 1:20 - bulk/default class with rate $[9*$UPLINK/10]kbit 1:30 - bulk/default low priority

Hello, I''m a total tc newbie, and I''m trying to tweak the wondershaper script (http://lartc.org/wondershaper/) to get a slightly different result. Excuse me if I will not use the correct technical terms, it''s a whole new world to me :) wondershaper.htb creates 3 HTB classes; 1:10 is high prio, 1:20 is bulk (default), and 1:30 is low priority. The classes are

Hi folks, I''m trying to shape two clients in my LAN when accessing the internet. Actual situation is that EVERY traffic goes into 1:40, so the client which should fall into 1:30 does not get the lower uplink it should have, but the uplink defined for the client defined as 1:30 When I disable the definition of 1:40, every traffic falls into 1:30 (except for the traffic defined to be in

Hi, I''m really new to traffic shaping and try to implement the wshaper.htb script. I have a linux box that serves as vdr, mldonkey, samba, apache and mailserver (imap), connected to my LAN with 100mbit. I''m connected to the inet via adsl with a hardware router/firewall, got 384k downlink 64k uplink. When I have mldonkey running, imap (via Outlook) gets *very* slow (mails with

Hi all, ive got 2 internet connections set up via the nano howto (which are working great) and we are running NAT. Was looking in to qos mainly to stop large http downloads/ftp downloads from hogging the line so that browsing for other users doesnt slow to a crawl, but if the line is free and no one is doing anything then for it to use the available bandwith. The wondershaper sounded exactly what

Hi I''m looking for a quick recipe for a newbie to control http traffic in my linux gw. My internet is overloaded already and vpn external clients are experiencing troubles (disconnecting in peak hours). Any suggestions ? Regards Guillermo Caracas/Venezuela On Thu, 2004-05-06 at 14:40, lartc-request@mailman.ds9a.nl wrote: > Send LARTC mailing list submissions to >

Thanks for the tips Brian, Actually, I have many sorts of links, line PPOE ADSL, PPPOA ADSL which a use PPTP over PPOA relay, radio links that connect in the ethernet interface and cable modems. To change the SFQ queue size I must recompile de kernel? I think a saw some messages talking about that. One other thing, I have the 1:10 a 1:20 class, let''s assume there is no

tc class add dev $DEV parent 1: classid 1:1 htb rate ${UPLINK}kbit burst 6k tc qdisc add dev $DEV handle ffff: ingress tc filter add dev $DEV parent ffff: protocol ip prio 50 u32 match ip src \ 0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1 why does the download is being sent to class 1 which is limited by uplink ? why the rate is being mentioned in filter and in class ?

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! when I activate wondershaper on my dsl connection (pppoa vc mux), i get three errors: # sh -x /usr/sbin/wshaper ppp0 + /usr/sbin/xmlstarter setenv tc_downlink + DOWNLINK= + /usr/sbin/xmlstarter setenv tc_uplink + UPLINK= + [ -z ] + cat /proc/avalanche/avsar_modem_stats + grep Connection Rate + awk {printf("%d", $8)} +

On 2024-09-07 4:52 p.m., Jeff Newmiller via R-help wrote: > When you specify LE in the encoding type, you are logically telling the decoder that you know the two-byte pairs are in little-endian order... which could override whatever the byte-order-mark was indicating. If the BOM indicated big-endian then the file decoding would break. If there is a BOM, don't override it unless you have to

I tried it on R 4.4.1 on Linux Mint 21.3 just before I posted it, and I just tried it on R 3.4.2 on Ubuntu 16.04 and R 4.3.2 on Windows 11 just now and it works on all of them. I don't have a big-endian machine to test on, but the Unicode spec says to honor the BOM and if there isn't one to assume that it is big-endian data. But in this case there is a BOM so your machine has a buggy

On Sun, 08 Sep 2024, Christofer Bogaso writes: > Hi, > > I am trying to the data from > https://online.stat.psu.edu/onlinecourses/sites/stat501/files/ch15/employee.txt > without any success. Below is the error I am getting: > >> read.delim('https://online.stat.psu.edu/onlinecourses/sites/stat501/files/ch15/employee.txt') > > Error in make.names(col.names,

When you specify LE in the encoding type, you are logically telling the decoder that you know the two-byte pairs are in little-endian order... which could override whatever the byte-order-mark was indicating. If the BOM indicated big-endian then the file decoding would break. If there is a BOM, don't override it unless you have to (e.g. for a wrong BOM)... leave off the LE unless you really

That looks like a UTF-16LE byte order mark. Simply open the connection with the proper encoding: read.delim( 'https://online.stat.psu.edu/onlinecourses/sites/stat501/files/ch15/employee.txt', fileEncoding = "UTF-16LE" ) On Sat, Sep 7, 2024 at 3:57?PM Christofer Bogaso <bogaso.christofer at gmail.com> wrote: > > Hi, > > I am trying to the data from >

Hi! Could somebody tell me, what is difference between these two prio parameters in http://lartc.org/lartc.html#AEN2241 1) tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit burst 6k prio 1 ^^^^^^ AND 2) tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10

I am wondering if someone can examine why my set up does not give me the desired result. What I aim to achieve is to make DNS, ICMP, POP3, HTTP, SSH, SMTP traffic at a higher priority than FTP serving and Kazza traffic. However, when the FTP server is busy servicing FTP traffic, web browsing traffic has dragged to almost unusable. Abstract of my iptables script follows:- # Mark traffic on

I''m trying to build a QoS system that would divide the outgoing traffic into four categories, each one also subdivided into two more categories. For that I chose a htb root qdisc subdivided into four classes, each of these classes contains also a htb qdisc. Until these point everything goes well, but when I try to attach a new class to the leaf htb qdisc a problem with the sintaxis

On 2024-09-07 7:37 p.m., Jeff Newmiller wrote: > I tried it on R 4.4.1 on Linux Mint 21.3 just before I posted it, and I just tried it on R 3.4.2 on Ubuntu 16.04 and R 4.3.2 on Windows 11 just now and it works on all of them. > > I don't have a big-endian machine to test on, but the Unicode spec says to honor the BOM and if there isn't one to assume that it is big-endian data.

Hello, I’ve read this Article avout VOIP and HFSC http://automatthias.wordpress.com/2006/06/30/hfsc-and-voip/ I’ve got few questions ? Considering this tc class add dev $DEV parent 1:1 classid 1:2 hfsc \ rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \ ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \ ul rate ${UPLINK}kbit rt = realtime curve ls = linksharing curve but m1 = ? m2 = ? d =

I have a setup where I have three NIC in a Debian box. I have eth1 conected to internet and eth0 NAT''ed to 192.168.1.1. eth1 and eth2 are bridged together, given ip 192.168.122.2. What I want to achieve is to perform traffic shaping on the bridge as well as prioritizing the traffic from eth0 very low. (This is from trental flat ...) However it seems that I am unable to perform thhe