similar to: HFSC statistic show question

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

Hi, I''m trying to get a handle on hfsc. Here is my configuration: root@jmnrouter:/jmn# tc class show dev vlan1 class hfsc 1: root class hfsc 1:1 parent 1: ls m1 0bit d 0us m2 225000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:10 parent 1:1 rt m1 191000bit d 25.0ms m2 135000bit ls m1 0bit d 0us m2 135000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:20 parent 1:1 rt m1 22008bit d

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Hello, I''ve got somes questions about Bridge and QOS ... I''ve got a serveur with 2 interfaces eth0,eth1 inside br0 bridge ... nothing of special ... If I understand all, normally I should configure TC class and qdisc on each physical or use ebtables to manage packets on output ... right ? I''ve attached my qos_script that hsfc and layer7 module. I use only Iptables

Hello, I''m having such problem with HFSC with following config: + tc qdisc del dev eth3 root + tc qdisc add dev eth3 root handle 1: hfsc default 2 + tc class add dev eth3 parent 1: classid 1:1 hfsc ls rate 512kbit ul rate 512kbit + tc class add dev eth3 parent 1:1 classid 1:2 hfsc ls rate 2kbit ul rate 400kbit + tc class add dev eth3 parent 1:1 classid 1:3 hfsc ls rate 32kbit ul rate

I have important question about bandwidth allocation statistic show when i''m use "tc -s -d class ls dev eth2" At first, before testing I think "work" parameter from this command are real bandwidth in each class but when i''m calculate this parameter ... it''s too big number ... like it''s not a bandwidth rate and it''s may be some

Hello, I''m using Linux kernel 2.6.x and tc (from iproute2 package). I''m trying to use HTB or HFSC scheduler in order to limite the rate of outgoing packets and also in order to minimiez delay for RTP stream. But I didn''t suceed in having this 2 QoS services working. I use Iptables in order to classify packets. Here is my HFSC conf. In fact the pings that i send from

Hello, First I want to point out that I''m not so familiar with HFSC, since there not so much info online. But here is my script: ${TC} class add dev ${LAN_IFACE} parent 1:0 classid 1:1 hfsc ls rate 100mbit ul rate 100mbit ${TC} class add dev ${LAN_IFACE} parent 1:1 classid 1:2 hfsc ls rate 90mbit ul rate 90mbit ${TC} class add

Hello, I just found the great howto and started shaping my internet connection. The howto''s last update is a liitle in the past now so I have some questions about how things are done the best way nowadays ;-) To ensure a stable and low latency voip communication I added an HFSC qdisc to device ppp0 (1 Mbit SDSL). There are two classes (by now): One for SIP and RTP and one for the

Hello I have few questions regarding tc functionality (qdiscs, classes, etc.) when vlans are in use. For example, consider interface eth0, for which I create and extra vlan with vconfig, let''s say eth0.11. Then using tc I can add usual things - qdiscs, filters, ... - to both eth0 and eth0.11. The questions are: - on which interface - virtual or real, should I actually use tc ? Or

Hi, I have problem with this simple script: #!/bin/bash if [ "$1" == "del" ]; then tc qdisc del dev eth0 root handle 1: htb default 10 exit fi tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 800kbit ceil 900kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 300kbit ceil 600kbit tc class add dev eth0 parent 1:1

In this simple htb setup: # tc -s -d class ls dev eth0 class htb 1:1 root rate 300000bit ceil 300000bit burst 1749b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 7 Sent 13171835 bytes 13169 pkt (dropped 0, overlimits 0 requeues 0) rate 45848bit 10pps backlog 0b 0p requeues 0 lended: 5272 borrowed: 0 giants: 0 tokens: -84429 ctokens: -84429 class htb 1:2 parent 1:1 prio 0

Hi folks...!!! I need to generate qdisc statistics to show my 4 class (10, 20, 30, 40), i`ve all working with HTB and so on, but i need to graph this results e.gwith RRDTOOL. I found a script made in perl, that can to graph my 4 class, but i need to know which IP address on my LAN are using the bandwidth too, in other hand i need to classify the traffic by IP to show. This is an out of my

Hi, for quite some time now I would like to switch from the proprietary driver to nouveau, using a GK107 (Quadro) in a thinkpad. Unfortunately the monitors connected to the lenovo "ultra dock" are not properly recognized when using nouveau. The laptop contains a multiplexer: so in the bios it can be selected, whether the docking station's DP/HDMI/VGA-Ports are "directly"

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

I have to match my packets based on MAC address, which I cannot do in the POSTROUTING chain, so I do it in PREROUTING using MARK. Then, I match on the MARK in the POSTROUTING chain to do a CLASSIFY. But this does not seem to work: wireless-r1 bwlimit # iptables -L -v -n -t mangle Chain PREROUTING (policy ACCEPT 3353K packets, 941M bytes) pkts bytes target prot opt in out source

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hello list, I discover strange behaviour of shaping traffic that i setup from Shorewall-4.0.2. I know that this is not Shorewall problem but may be somebody from list can help me or explain this situation. I have follow interfaces in 'tcdevices' files: #INTERFACE IN-BANDWITH OUT-BANDWIDTH # $EXT_IF 500kbit 248kbit $INT1_IF 500mbit

Hi I''m trying to understand this qdisc stats output: #tc -s qdisc ls dev [interface] [..] qdisc htb 1: r2q 10 default 13 direct_packets_stat 38 Sent 3867654734 bytes 7023775 pkt (dropped 4, overlimits 4852340 requeues 0) rate 0bit 0pps backlog 0b 11p requeues 0 [..] In all my qdiscs, I''ve got "rate 0bit". What does it mean ? As you can see, there is some traffic