similar to: HTB shaping problem

Thanks for quick reply Andreas! > Every class is allowed to use bandwidth as long as it does not have to > borrow (the specified rate is guaranteed). Prio in HTB only affects > borrowing bandwidth from other classes... In the example below, the class > 1:5 should be allowed to borrow bandwidth before 1:14 does. Thats exactly what I want from HTB to do..to prio the borrowed bandwidth.

Hi, I''m using tc and HTB to shape my outgoing ADSL traffic. I was trying to make some graphs on the classes by meassuring the "sent bytes" of each class using rrdtool to store the data (as kbps after conversion). I expected that meassuring the root class I would get values similar that the ones I get measuring the interface counters but they differ by a large amount. Is

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

Hello list, I discover strange behaviour of shaping traffic that i setup from Shorewall-4.0.2. I know that this is not Shorewall problem but may be somebody from list can help me or explain this situation. I have follow interfaces in 'tcdevices' files: #INTERFACE IN-BANDWITH OUT-BANDWIDTH # $EXT_IF 500kbit 248kbit $INT1_IF 500mbit

I''m attempting to set up a hierarchy of tc qdiscs with filters, but the filters don''t seem to be working correctly.  I''m running iptables 1.3.5 with iproute 2.6.16.20060323 on a Gentoo 2.6.18 kernel.  The system takes all my tc setup, but does not filter packets as I am expecting it to based on my ruleset. My tc qdiscs and classes are added correctly and report as

Hi, i am running imq + htb on my router , the situation is like this eth0 = uplink to my provider eth1 = 1st customer eth2 = 2nd customer eth3 = 3th customer eth0 has limit 512 and i want to share this between eth1 eth2 and eth3 , but not working , this is the script i used, \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ #!/bin/sh

Hi, I have problem with this simple script: #!/bin/bash if [ "$1" == "del" ]; then tc qdisc del dev eth0 root handle 1: htb default 10 exit fi tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 800kbit ceil 900kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 300kbit ceil 600kbit tc class add dev eth0 parent 1:1

Hi I have tested with FC3 but iam not able get any good results on that. in the list some one recomend me that > 3.17 HTB should work I saw latest FC4 test2 has the HTB 3.17 with iptables 1.3.0 i have install in my P4 box, and trying to test when iam uploading its working perfect, but when iam downloading its going to default class can some one experinced the same problem below is the my

In this simple htb setup: # tc -s -d class ls dev eth0 class htb 1:1 root rate 300000bit ceil 300000bit burst 1749b/8 mpu 0b overhead 0b cburst 1749b/8 mpu 0b overhead 0b level 7 Sent 13171835 bytes 13169 pkt (dropped 0, overlimits 0 requeues 0) rate 45848bit 10pps backlog 0b 0p requeues 0 lended: 5272 borrowed: 0 giants: 0 tokens: -84429 ctokens: -84429 class htb 1:2 parent 1:1 prio 0

Hi all, I''m trying to setup htb on a box with the following class configuration: class htb 1:2 root rate 4Mbit ceil 4Mbit burst 2099b/8 mpu 0b overhead 0b cburst 2099b/8 mpu 0b overhead 0b level 7 Sent 0 bytes 0 pkts (dropped 0, overlimits 0 requeues 0) lended: 0 borrowed: 0 giants: 0 tokens: 4300 ctokens: 4300 class htb 1:4 parent 1:2 leaf 4: prio 7 quantum 1000 rate 1Kbit ceil

Eric, I''ve attached the output from the command you requested below. I''m using kernel 2.6.17.12 and tc version ss060323. I''m have a nforce4 onboard giggabit controller using the forcedeth driver, if that makes a difference. Charlie, I''ll take a look at the Apache model for throttling, thanks. I was going for tc because was going to try to add additional

Hi, What exactly are the "tokens"? I thought each token allowed the sending of one byte, that tokens are stored in a bucket that can hold a max of "burst" tokens, and that this bucket is filled with tokens at "rate". But theory does not seem to explain the "tc -s .." output in the examples below. And I can''t figure out why or how... #tc qdisc

Dear all, First, sorry for my bad English .. To night one of my client is the victim of UDP attack from internet. It''s tons of UDP packets from internet with destination to port 80. But when I look at class of that victim client, the actual class rate is over than configured rate class. Below is my screen capture. You can see at class 1:913 which have actual rate 105136bit while

Hello... Im trying to setup HTB to allow me to shape traffic from two upstreams that meets on single lan0 interface. I prefer to use HTB qdisc within HTB root qdisc for cleaner rules design. Seems that it doesnt work at all. tc -s class show doesnt show any traffic on other classes attached to HTB qdisc. Linux 2.6.20.7 iproute-2.6.20-070313 Weird thing is that tc -s class show that 1: and 2:

Hi all, I have been getting some strange results with HTB in kernel 2.6.11, and was wondering if anybody could give me some advice. Also, if someone could direct me to the changelog for the recent versions so I can see if it is worth upgrading? Anyway, the problem can best be summed up by looking at the output of ''tc -s -d class show dev eth0''. Some of the relevant results

Hi, got a 25/25Mbit connection which is quite stuffed. So I applied htb rules. Uplink: class htb 1:1 root rate 24500Kbit ceil 24500Kbit burst 4661b/8 mpu 0b overhead 0b cburst 4661b/8 mpu 0b overhead 0b level 7 Sent 430600689269 bytes 730147320 pkt (dropped 0, overlimits 0 requeues 0) rate 23057Kbit 5520pps backlog 0b 0p requeues 0 lended: 199673949 borrowed: 0 giants: 0 tokens: -964

Hi, there is something I''m not able to understand about HTB statistics. Why the qdisc show show how many packets are overlimits but in the classes there are always 0 packets overlimits or dropped? I try to expain with a simple example. I create a qdisc htb with only a class and then i do a lot of traffic. pc-innocenti:~# tc qdisc add dev eth0 parent root handle 1: htb default 10

I am completely new to this.. I am trying to make simple traffic control.. I have read quite some manuals and posts that i found, but i don''t understand much, i think.. My situation is: i have linux server which i am using for firewall for local network.. also on same linux server i have torrentflux for downloading torrents.. What i want to do is to give priority to local clients(2-3

I have to match my packets based on MAC address, which I cannot do in the POSTROUTING chain, so I do it in PREROUTING using MARK. Then, I match on the MARK in the POSTROUTING chain to do a CLASSIFY. But this does not seem to work: wireless-r1 bwlimit # iptables -L -v -n -t mangle Chain PREROUTING (policy ACCEPT 3353K packets, 941M bytes) pkts bytes target prot opt in out source

Hi I have setup iproute2 and need a bit of help reading the stats from it ===== output qdisc htb 1: r2q 10 default 20 direct_packets_stat 0 ver 3.17 Sent 547326809 bytes 1342627 pkts (dropped 9303, overlimits 2817572 requeues 0) backlog 46p qdisc sfq 10: limit 128p quantum 1514b flows 128/1024 perturb 10sec Sent 41874343 bytes 730889 pkts (dropped 0, overlimits 0 requeues 0) qdisc sfq