similar to: simple question

Hello Lartc Mailing List: Been working on something the last week and a half and ALMOST have it working.., just need a few pointers from the wizards on this mailing list to nail it. Ok, my setup is a hub and spoke arrangement, hub is Cisco 2821 with IOS 12.4. Spokes are ruggencom RX1000 routers, Debian based with the following versions installed: rx1000test:~# uname -a Linux rx1000test

Hello everybody. I would like to do some kind of shaping inside an ipsec tunnel implemented by Openswan and linux 2.6.18.x with xfrm (no KLIPS): for example, to limit outbound smtp traffic inside the tunnel. Question: where should I attach the qdisc to? Eth0? I''m asking this, because tcpdump only see the ESP packet on the eth0 and not the ''clear'' packet. TIA This is my

Hi list, I have tried google but just cant get this to work or figure it out. My setup ======== vanilla 2.6.13 kernel with CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_MULTIPATH_CACHED=y CONFIG_IP_ROUTE_MULTIPATH_RR=y CONFIG_IP_ROUTE_MULTIPATH_RANDOM=y CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=y CONFIG_IP_ROUTE_MULTIPATH_DRR=y My configuration: A host with two ppp links. Ontop of these two ppp dialup

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

are your workstations w98 ?? or nt/w2k ?? (have the same here, only with w98 ws) you can also use net time /SETSNTP:ntp server Collen Friday, February 13, 2004, 3:45:21 PM, you wrote: TFGF> I already configured my time zone, daylight, etc..... TFGF> The server date is correct. I already compiled a TimeZone file(.ZIC) with TFGF> the correct date for DayLight saving. TFGF> The

Hi Here is a short description of my network: ppp0 (adsl) ppp1 (adsl) | | | | --------------------- | Router | | Firewall | | MASQUERAD | | DNAT | | | | eth0 | --------------------- | | | ---------------------- |

Hello Shorewall list, I''m a happy Shorewall user since a few years now and everything works fine for me except one thing that I try to implement since a week, the multi-isp. I''ve downloaded the 2.4.0 Stable release yesterday and tried the RC2 since a week. My config is a Debian running a kernel 2.4.27 home made with the CONNMARK.diff patch applied I''m using 2 ISP,

Thanks in advance! Summary: when I load netem and teql together, teql doesn''t work correctly. (If I load teql only, everything is fine) I loaded both netem and teql. Netem is associated with eth0, and teql is associated with both eth0 and eth1. But traffic only goes out of eth1. Attached are the commands that I used to configure teql and netem (on machine 1), and commands to

I have two adsl lines on my linux firewall box and i want to do some load balance between them...i tried a lot of different things, but it isn´t working...Following the instructions of http://lartc.org/howto/lartc.rpdb.multiple-links.html i used the configuration above. using "iptraf" I can see some few packets using the ppp1 connection, but almost all the packets use ppp0 connection.

I need basic PPPoE startup help. adsl-start DID bring up my PPPoE link (ppp0) to my ISP over eth0 via the DSL modem/bridge. My IPv4 CIDR block is routing and Shorewall is doing the firewalling. But shorewall has to be started after ppp0 is up and working. For now this means running shorewall restart (or start?). Shorewall 4.2 will have a way to restart shorewall without recompiling, I

Hello all, We have two ADSL lines configured on a single box, hence interfaces ppp0 & ppp1. Is there a way to route packets to ppp0, say based on destination port 80 & other traffic like voice through ppp1? Thanks.

Hi, I am using netem to add loss and then adding another qdisc within netem according to the wiki. Then i want to change the netem drop probability without having to delete the qdisc and recreate it. I try it but I get invalid argument: thorium-ini hedpe # tc qdisc add dev ath0 root handle 1:0 netem drop 1% thorium-ini hedpe # tc qdisc add dev ath0 parent 1:1 handle 10: xcp capacity 54Mbit

That could have gone smoother. I had many problems with the NFS install on my firewall then once I got the server back up, mail delivery was broken :- ( I still haven''t gotten ulogd to run under RH9.0 but everything else seems to be working ok... -Tom -- Tom Eastep \ Shorewall - iptables made easy Shoreline, \ http://www.shorewall.net Washington USA \ teastep@shorewall.net

Hi, I currently connect to my ISP via my adsl modem in bridge mode and PPPoE. I am due to put a second PPPoE ISP onto my firewall box which will give me ppp0 (general) and ppp1 (static leased line). The static leased line will run a number of services on its static IP and it is therefore imperative to make sure rules defined for the static line are assigned to the correct interface. I need this to

i''ve read your http://lartc.org/howto/lartc.rpdb.multiple-links.html article as well as Advanced IP Routing (esp. chapter 10.4) and still unable to make this thing work. am i that helpless? :) is there anyone to guide me through the multiple ISP setup? into details. i got 2 dsl connections from different ISPs (A and B), both connections use PPPoE, both got assigned with dynamic IPs

I''m trying to use tc and netem to delay packets from several different machines as they exit via eth0. Assume two source IPs, 10.0.0.122 and 10.0.0.133. I''d like to delay packets from the first one by 200ms, and packets from the second one by 300 ms. Any other traffic should be sent out normally. Here''s what I tried: # make three classes, 1:1, 1:2, and 1:3: tc qdisc add

I''m trying to setup a netem delay with no luck (using iproute2-2.6.8, compilation broke during arpd compile, so I use the tc binary in the tc/ subdir, there''s also a q_netem.so there). kernel is 2.6.8.1, compile with CPU cycle counter as time reference. I was using sch_delay of 2.6.7 happily with something like: tc qdisc add dev eth0 root 1: delay latency 1ms rate 35M now I use:

Hi! We want to run TCP streams to several port numbers through one interface, each with a different delay set by Netem. E.g. TCP streams to port 80 could have 50ms delay, while TCP streams to port 81 could have 100 ms delay and so on. We have tried to solve this by using a combination of tc filter and netem rules, but we can''t get it quite right. We are considering one class per port,

Hi all, I''m running some tests with netem and I noticed some strange behaviour that looks like a bug: I''m pinging another machine and adding delay with netem. When I tell netem to give me a 10ms delay, it works fine. The problem is that when I ask for a 11ms delay, it gives me 20ms! It happens for any value between 11ms an 20ms, and it repeats for values over 20ms, now

My Internet gateway is using ADSL PPPoE connection with dynamic public IP assigned by ISP. My Internet gateway is Redhat AS3 U2, shorewall 2.0.9 As my ISP provided 4 simultaneous pppoe dailup connection for the same physical adsl line. My linux server can be configured for multiple pppoe connection i.e. ppp0, ppp1, ppp2, ppp3 Is it possible of shorewall to assigned say ppp0''s IP is