similar to: HFSC traffic loss bug, kernel 2.6.16.24

I''m using HFSC to limit bandwidth for our wireless customers. However, I''d also like the bandwidth prioritized based on packet type. This is what I''m trying right now, and I''d just like some input from anyone out there knowledgeable in this on whether it does what I want it to do: Eth1 -> HFSC ........|-> HFSC (User1) (Min 512 Kb, Max 1024 Kb, Burst 1536

Hi, I''m trying to get a handle on hfsc. Here is my configuration: root@jmnrouter:/jmn# tc class show dev vlan1 class hfsc 1: root class hfsc 1:1 parent 1: ls m1 0bit d 0us m2 225000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:10 parent 1:1 rt m1 191000bit d 25.0ms m2 135000bit ls m1 0bit d 0us m2 135000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:20 parent 1:1 rt m1 22008bit d

Hello, I''m having such problem with HFSC with following config: + tc qdisc del dev eth3 root + tc qdisc add dev eth3 root handle 1: hfsc default 2 + tc class add dev eth3 parent 1: classid 1:1 hfsc ls rate 512kbit ul rate 512kbit + tc class add dev eth3 parent 1:1 classid 1:2 hfsc ls rate 2kbit ul rate 400kbit + tc class add dev eth3 parent 1:1 classid 1:3 hfsc ls rate 32kbit ul rate

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings all, Working in concert with the original authors, Klaus Rechert and Patrick McHardy, I have translated their article "HFSC Scheduling mit Linux" [0] on Hierarchical Fair Service Curve (HFSC) into English [1]. http://linux-ip.net/tc/hfsc.en/ Although the original content is not available directly from their website,

1. HFSC have 4 curve such sc, rc, ls, ul and 1.1 In leaf class can specify rc for guarantee service (bandwidth and delay) and If want to sharing fairness exceess service, we must specify ls and ul curve too (ls curve with paramater m2 specify at lease sharing bandwidth in that class will receive and ul curve mean maximum bandwidth in that class will receive) so i''m doubt .. about if i

after i use "tc -s -d class ls dev eth0" will show statistic data about HFSC ,like this root@ubuntu:/home/shaper# tc -s -d class ls dev eth2 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 24 work 13844792199226589188 bytes rtwork 20937281664 bytes level 3461036864 class hfsc 1:11 parent 1:1 sc m1 30720Kbit d 10.0ms m2 30000bit ul m1 0bit d 0us m2

I am investigating changing our broadband bandwidth control scripts over to HFSC. What I would like to accomplish is this: { * DOWNLOAD * I need a download class for each user (we''ll call it Class 1) that offers a minimum of lets say 384Kbps and a maximum of 1.5Mbps. The rates between 384Kbps and 1.5Mbps should be shared among all users. Each user should always be able to get at

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and  HFSC so i''m doubt a lot thing and your reply are so very helpful to me ... My question is In HTB tc command question 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about

Hi: I am using a machine with the 2.4.26 kernel, and trying to compare the performance of the HTB qdisc with the HFSC one. I have the following simple script that allows me to have a video stream on port 1234 while it limits a ttcp UDP stream so that the video stream is unimpaired. #!/bin/bash tc qdisc add dev eth0 root handle 1: htb default 12 tc class add dev eth0 parent 1: classid 1:1

now i''m read a lot of knowledge paper about traffic control in linux because now i''m try to develop and research about traffic shaper so can everybody tell me about my topic ... Is it can do for real???? my topic is " now, many organization use traffic shaper for control traffic and bandwidth because don''t want something example some mac address, ip address,

now, i''m learning and try to read a lot of article about tc command in linux for setting traffic shaper. but i''m doubt about In the theory about tc command ... In general, we define class under root qdisc but Is it can be possible ???? If we define another qdisc under root qdisc, Can i do it? because i have just read tc command syntax and i found this point ... syntax: tc qdisc

I have been looking at the hfsc for some time as a replacement or at a class that can be used like htb. But I seem to have run into a problem. With htb classes it is easy to make three or more levels of priority for a connection. All you need to do is to make classes and give them different prio levels. But it seems like you can only define a real-time bandwidth and a link sharing bandwidth.

My hfsc rule .. tc qdisc add dev eth2 handle 1: root hfsc iptables -t mangle -N ms-all iptables -t mangle -N ms-all-chains iptables -t mangle -N ms-prerouting iptables -t mangle -A PREROUTING -j ms-prerouting iptables -t mangle -A ms-prerouting -j CONNMARK --restore-mark iptables -t mangle -A ms-prerouting -p udp --dport 4444 -j MARK --set-mark 1 iptables -t mangle -A ms-prerouting -p udp -m

hmm HFSC ? where can i find more informations and examples about the *linux* HFSC ? http://trash.net/~kaber/hfsc/ does not help here -- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi I''m moving to hfcs (mostly succesfuly:) ), but I''ve encountered a strange problem: When I download something from this server using wget (one thread) via an idle uplink, I get no more than 130 kbit/s, and when I''m using prozilla (or start more wgets), I get about 200 kbit, but still it''s not all the link can do (240) - the rest remamins unused. Is this

Hello All, I am trying to prioratize VOIP traffic from data. The follwing link says that HFSC is better than HTB for shaping VOIP traffic. http://www.voip-info.org/wiki-QoS+Linux+with+HFSC I am in search of good documentation to start with HFSC, I am unable to understand the parameters used. I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

hi all, long time since i posted on the list. just wondering if anybody has played around with hfsc and if so could he/she share their info on it thanks adrian -- To mess up a Linux box, you need to work at it; to mess up your Windows box, you just need to work on it. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

Hello, I’ve read this Article avout VOIP and HFSC http://automatthias.wordpress.com/2006/06/30/hfsc-and-voip/ I’ve got few questions ? Considering this tc class add dev $DEV parent 1:1 classid 1:2 hfsc \ rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \ ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \ ul rate ${UPLINK}kbit rt = realtime curve ls = linksharing curve but m1 = ? m2 = ? d =