similar to: Can i attach another qdisc (htb) under HFSC classfull ?

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

Hello, First I want to point out that I''m not so familiar with HFSC, since there not so much info online. But here is my script: ${TC} class add dev ${LAN_IFACE} parent 1:0 classid 1:1 hfsc ls rate 100mbit ul rate 100mbit ${TC} class add dev ${LAN_IFACE} parent 1:1 classid 1:2 hfsc ls rate 90mbit ul rate 90mbit ${TC} class add

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

now i''m read a lot of knowledge paper about traffic control in linux because now i''m try to develop and research about traffic shaper so can everybody tell me about my topic ... Is it can do for real???? my topic is " now, many organization use traffic shaper for control traffic and bandwidth because don''t want something example some mac address, ip address,

Hi all ! I''m building a network appliance whose goals are to enhance Voip quality on 512/128k DSL links. But, i have a voice quality problem, and i think i''m doing something wrong, but i can''t find what. Please excuse my terrible english, i''m french. >From what i''ve read, tc is the tool i need. I read the documentations, readmes and lartc.org

Hi all, Long email but please be patient :) I am part of EHAS [1], a non profit organization which main goal is to improve the Healthcare assistance in isolated rural areas in developing countries. Recently we have developed a long distance Wi-Fi network in Cuzco (Peru). This network provides connectivity to 12 nodes (they are in fact Health Centers). As VoIP is a essential service in this

Hi I''m actually using a wondershaper derived script. The problem I have is that when I ping (ping is in high priority queue) the ping time is not as low as I expected with p2p running: 760 packets transmitted, 760 received, 0% packet loss, time 759695ms rtt min/avg/max/mdev = 39.667/62.863/598.539/33.287 ms, pipe 2 With voip, it is much better with the qos but it is still a little

Hello, I''m using Linux kernel 2.6.x and tc (from iproute2 package). I''m trying to use HTB or HFSC scheduler in order to limite the rate of outgoing packets and also in order to minimiez delay for RTP stream. But I didn''t suceed in having this 2 QoS services working. I use Iptables in order to classify packets. Here is my HFSC conf. In fact the pings that i send from

With the below script, whenever I ping 10.0.16.10 (which matches the only filter I have), traffic still get''s sent to the default 1:2 class instead of 1:1 and I don''t know why... Any hints? (kernel 2.6.12, iproute2-2.6.15) tc qdisc del dev eth0 root > /dev/null 2>&1 tc qdisc add dev eth0 handle 1: root htb default 2 tc class add dev eth0 classid 1:1 parent 1: htb rate

My hfsc rule .. tc qdisc add dev eth2 handle 1: root hfsc iptables -t mangle -N ms-all iptables -t mangle -N ms-all-chains iptables -t mangle -N ms-prerouting iptables -t mangle -A PREROUTING -j ms-prerouting iptables -t mangle -A ms-prerouting -j CONNMARK --restore-mark iptables -t mangle -A ms-prerouting -p udp --dport 4444 -j MARK --set-mark 1 iptables -t mangle -A ms-prerouting -p udp -m

Hello, I have finally managed to understand HFSC up to a level which allowed me to create a QoS script which maintains low VoIP latency while running stuff like eMule. Unfortunately, HFSC seems to have a severe bug. Why do I consider this as a bug defenitely? Well, my script runs without any errors, then QoS works perfectly for some hours, no error messages in kernel log. Then randomly the

Hello list, I am now using hfsc for QOS. I have something like this: tc qdisc add dev ethx root handle 1: hfsc default 9 tc class add dev ethx parent 1: classid 1:1 hfsc ls m2 70mbit ul m2 70mbit tc class add dev ethx parent 1:1 classid 1:9 hfsc ls m2 7mbit #DNS stuff follows tc class add dev ethx parent 1:1 classid 1:2 hfsc rt m1 12mbit d 1ms m2 1mbit #Half-life tc class add dev ethx parent

hi, I would like to use the HFSC scheduler for my QoS. I''ve 4 class and 2 of them need to control the bandwidth and the latencies so I think I must use HFSC. So I read some doc ( http://del.icio.us/tag/hfsc ) but its not very clear. I make some tests with differents parameters but I''m not able to use correctly this scheduler: $TC qdisc add dev $dev root handle 1: hfsc default 40

I am completely new to this.. I am trying to make simple traffic control.. I have read quite some manuals and posts that i found, but i don''t understand much, i think.. My situation is: i have linux server which i am using for firewall for local network.. also on same linux server i have torrentflux for downloading torrents.. What i want to do is to give priority to local clients(2-3

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify fallback

Hello, I''m having such problem with HFSC with following config: + tc qdisc del dev eth3 root + tc qdisc add dev eth3 root handle 1: hfsc default 2 + tc class add dev eth3 parent 1: classid 1:1 hfsc ls rate 512kbit ul rate 512kbit + tc class add dev eth3 parent 1:1 classid 1:2 hfsc ls rate 2kbit ul rate 400kbit + tc class add dev eth3 parent 1:1 classid 1:3 hfsc ls rate 32kbit ul rate

Hi First I must say that I`am an author of HTB auto-configurator (so I know some about QoS under linux) and I have read a lot of articles about HFSC, but I still don`t know how to configure this algoritm properly. Maybe somone can help me and write a little example for me (the best will be Patrick McHardy who has ported HFSC to linux) - please just three queues. My situation: Let say I have 1Mbit