similar to: Help On Upload Limiting Using CBQ.init

Hi All , My first message and I have a little problem with my FC6 box trying to block emule traffic using layer7 . Here my network : Internet --------- ADSL Router ------------------- FC6 Box -------------------- Emule Box external ADSL : Dynamic Internal ADSL : 192.168.254.1 external FC6 : 192.168.254.3 internal FC6 : 192.168.253.1 Emule Box : 192.168.253.3 I guess that everything

About the cbq.init. Four machines which traffic to limit in same LAN. Is the samething if I put limiting rules to four different files or all to the same file? Like: DEVICE=eth0,10Mbit,1Mbit RATE=64Kbit WEIGHT=6Kbit PRIO=5 RULE=192.168.0.5 RULE=192.168.0.6 RULE=192.168.0.7 RULE=192.168.0.8 OR four equal files with different IPs, Ids and no PARENT rule? What style of ID numbering you use if

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78

Sub:[LARTC] cbq init for one port on a subnet Hello, We use cbq.init to limit bandwidth. It works great on a per-user basis. Now I''d like to limit traffic from a netblock to the Internet on port 6699. Network is 192.168.0.160 mask 255.255.255.224 eth0 is the gateway eth1 connects the netblock in question Is this the proper syntax; DEVICE=eth0,10Mbit,1Mbit RATE=100Kbit

oops, i forgot to reply to the list :-/ Début du message réexpédié : > De : Vincent Dautremont <vdautrem@ulb.ac.be> > Date : 30 août 2007 16:58:26 GMT+02:00 > À : Ali Jawad <alijawad1@gmail.com> > Objet : Rép : [LARTC] Priotirize SSH Traffic > > try that > #tc qdisc add dev eth0 root handle1: prio > # tc filter add dev eth0 protocol ip parent 1: prio 1 u32

OK, finally I have made cbq run ! now I would like to know if it is posible to limit a range of IP to a speed. something like this : from 192.168.1.1 to 192.168.1.21 limit to 128K I don''t whant to limit each IP to 128K, what I would like to do is limit all 20 IP to have a max of 128K. Is it posible?

Hi everyone, This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at 10Mb/s. The purpose is to test CBQ Here is my script ------------------------------------------------------------------- # Root qdisc tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \ avpkt 1000 cell 8 # Classes tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \ rate 5Mbit weight

Hi, In my LAN Iam trying to make following setup: - All the traffic generated by 10.0.2.1 should go to 10.0.2.11, If the destination of this traffic is internet than it should be placed on its interface eth1. Outgoing traffic on eth1 should be shaped.For this I am using fw filters and cbq. _______ 10.0.2.1 -------> 10.0.2.11(eth0 )----| A

While I''m thinking about that review of howto changes, here are a few other responses about things I don''t believe. I''ll be interested in more info if anyone has any. ==== [from new doc] Besides being classful, CBQ is also a shaper and it is in that aspect that it really doesn''t work very well. It should work like this. I''ve not noticed that it

Hi, The CBQ config file shud be some thing like this. DEVICE=eth0,10Mbit,1Mbit RATE=50Kbit WEIGHT=5Kbit Shall i hardcode the DEVICE BW as 10/100 Mbit or Shall i use any other tool like ethtool for getting this. ethtool gives Speed: 10Mbps If so, how about, if i use some other Interfaces other than eth0, like ppp0 or some other? C''d anybody can give a suggestion over this? thanks

Hello everyone, I''m a newbie experimenting with CBQ shaping and am facing a few problems. Can any of you please help? TEST SETUP: +---------------+ +----------------+ | 10.0.0.103 |----------->| 10.0.0.102 | +---------------+ +----------------+ 10.0.0.103: Linux, 100Mbit/s NIC 10.0.0.102: Windows, 100Mbit/s NIC, iperf tcp server (ports 2000 and 2001) WHAT I

Hi I do have asterisk running in real time I do want to add voicemail to real time. I did follow : http://www.voip-info.org/wiki-Asterisk+RealTime+Voicemail However when I do try to make a voicemail I do get : [Nov 20 12:17:04] NOTICE[16501]: chan_sip.c:5506 process_sdp: No compatible codecs, not accepting this offer! -- Executing [999alijawad at a2billing:1]

Hi, I''m work on traffic shaping and I would like to know if it''s possible to mix differents Queueing Disciplines ?? I would like to combine the proporties of a PRIO discipline with that of a CBQ discipline. I read some documentation and I found nothing about that, can you help me ? I think to try something like that : tc qdisc add dev $DEV root handle 1: cbq … tc class add dev

Hi Iam using the script below to limit usage for the computers on my lan with respect to download and upload I have a 256kb up and 256 kb down connection, I want limit the speed of each computer to 64kbyte down and 32 up as a maximum. The script below works however it limits the up and down of the whole specified network to 64/32 ... what do I have to edit so that the script handles the requests

Hi Iam using the script below to limit usage for the computers on my lan with respect to download and upload I have a 256kb up and 256 kb down connection, I want limit the speed of each computer to 64kbyte down and 32 up as a maximum. The script below works however it limits the up and down of the whole specified network to 64/32 ... what do I have to edit so that the script handles the requests

Hi All I am developing a client that uses libjingle to do xmpp stuff with ejabberd. I can also make audio calls between those clients. What I am trying to archive now is to send calls to pstn using jingle. I was told in the jingle-dev community that asterisk can do that. Is there any way to send jingle audio calls to asterisk and will it understand them ? If yes..can I forward those calls to PSTN

Hi All, I''m using iptables-1.2.7a on RedHat8 kernel 2.4.20. I wanted to limit the file-sharing traffic to the internet. I marked the packets with iptables: iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1024:1862 -j MARK --set-mark 1 iptables -A FORWARD -t mangle -p tcp -s 192.168.1.1/24 -d ! 192.168.1.1/24 --dport 1864:65535 -j MARK --set-mark 1

Hello Everyone :), i''m using cbq.init version 7.1 for traffic shaper, the rule did work well with flat rule (without parent/child)..here the condition of my network : - have a DMZ (and i not want the traffic to DMZ be bounded) - i made the CBQ engine also a bridge and i put it before NAT server (so if

Hey all, I had asked a question a little while ago about CPU usage being outrageous while using tc and a cbq qdisc. Ed was very kind and offered a few suggestions. One of these was to look at hashing. So after pounding away at it for about a week, I have a general understanding of how it works and have tried to implement it. Unfortunately, and quite obviously since I''m posting here, it