similar to: How to select Skype traffic??

As seen on my post at: http://www.sveasoft.com/modules/phpBB2/viewtopic.php?p=28112#28112 This works very well... It does NOT work with stable 4.0! sveasoft will be issuing a bug fix for this (4.1) in the near future. Final Rev of working script w/ asterisk support I'm not going to run alchemy on production machines until it is stablish. Remember to set your uplink properly and to set

Hello there! I am trying to get traffic shaping working on my Linux router (debian woody 3r02) and for some things I wanted to use the layer 7 packet classifier, but I can''t get it to work. Here is what I did: -downloaded the patches from http://l7-filter.sourceforge.net -downloaded the kernel 2.6.7 source -downloaded the iptables 1.2.11 source -patched kernel (layer7 patch and some

Hi all, I am running Slackware 10.1 with Kernel 2.6.14.3 includes iptables 1.3.4 with layer 7 My network diagram below: - INTERNET --- LINUX_ROUTER_FW --- PCs Below is my simple iptables script: - echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t mangle -A POSTROUTING -m layer7 --l7proto applejuice -j MARK --set-mark 1 iptables -t

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

I''ve compiled my kernel (2.6.12.3) and iptables (1.3.3) and now -m layer7 option from iptables works (i don''t get any error when run the iptables command with -m layer7). The problem is that no packet is matched. For example iptables -A INPUT -p tcp -m layer7 --l7proto http -j ACCEPT doesn''t match http packets. The same for dns and ssh. So, what am I doing wrong? Is this

Hi all! I''m trying to shape traffic in a dorm''s network (4 mbit symmetrical internet link, about 200 computers, heavy p2p usage). The router is a p4xeon running linux 2.6.9 with the qnet patches (http://kem.p.lodz.pl/~peter/qnet/). When I activate ip_forward I get >20% packet loss and a lot of duplicates. Any ideas? I attach my shaping script. Thank you very much in advance,

--------------eth0---80.48.56.70---------- -------------80.48.56.65 ISP | my | router1 | | | linux | | | router2 ------------eth1---192.168.200.10----- ----------------192.168.1.1 ISP I''ve two ip from my isp one public and one internal. ISP have two routers router1 is gw for public ip and router2 is gw for internal

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

i search a lot forum how to get bandwidth statistic such number of packet, total byte in each application protocol by using IPTABLES + netfilter-layer7 but i don''t know which script for getting it in log file and use data after get it for plotting graph later my IPTABLES command like this iptables -t mangle -N all iptables -t mangle -A POSTROUTING -j all iptables -t mangle -A

Has anything changed this 2 years with wine and Win snmptrap support?

HI All , I am running a FC6 box with two internet links with load balance . Every thing is working fine expect the MSN connection that failed and reconnect every time and SSL connections . I would link to know if with the nona howto I could fix that . I have been tried with no success to redirect that connection only to one link but its look like do not work . Here my configuration :

Hello guys I don''t know if this thing has been posted before (if it was , please forgive me). I have 7 computers at home and I want all of them to have access to the internet. In order to do that , I set up a linux router (2 network cards) as a usual router (eth0 : 82.77.69.75 - internet connection ; eth1 : 192.168.10.1 - local network) . The other computers have ips ranging from

Hi All , My first message and I have a little problem with my FC6 box trying to block emule traffic using layer7 . Here my network : Internet --------- ADSL Router ------------------- FC6 Box -------------------- Emule Box external ADSL : Dynamic Internal ADSL : 192.168.254.1 external FC6 : 192.168.254.3 internal FC6 : 192.168.253.1 Emule Box : 192.168.253.3 I guess that everything

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

Hi, I just migrated my office's server from Slackware64 14.1 to CentOS 7. So far everything's running fine, I just have a few minor details to work out. I removed the firewalld package and replaced it by a simple Iptables script: --8<---------------------------------------------------- #!/bin/sh # # firewall-lan.sh IPT=$(which iptables) MOD=$(which modprobe) SYS=$(which sysctl)

Anyone out there have a functional DUNDi configuration using SIP for the inter-Asterisk transport? I've gotten it to work with IAX2, but if I change it to SIP it does not pass the call over even though it knows where to send it. Thanks. The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally

OK - this is starting to get frustrating... Are there any known issues with 2.6.9 and traffic shaping? I am using 2.6.9 with geoip 20041115, and get odd oopses. The following script oopses my box: ----------------------------------------------------- #!/bin/sh -x IFOUT=''eth1'' IFIN=''eth0'' TC=''/sbin/tc''

Is anyone getting '500 Internal Server' errors back from their Polycom phones when Asterisk sends a SIP NOTIFY message to them? I called Polycom tech support, who where utterly useless. Of course Polycom won't officially support it anyway, as they only support Asterisk Business Edition. We're using 1.2.9, but it's been ocurring for quite some time. We have about 35 phones and

Hi there, I have a little problem. I had this some months ago but didn''t solve it back then. I have patched my kernel with Layer 7 support and patched my iptables to support it, too. Now I inserted this line in my firewall script on my router for testing purpose: $IPTABLES -t mangle -A POSTROUTING -o $INET_IFACE -p tcp -m layer7 --l7proto http -j DROP It works, BUT only if the

This is a SER/Polycom question, but I hoped we may have some SER guru's here... I have a series of Polycom phones that are tying to register with OpenSER. The phone sends a REGISTER message, and OpenSER replies with Unauthorised (all normal). The phone re-sends the REGISTER with the credentials, and OpenSER sends Ok. Here's where it goes downhill. The polycom's appearance display