similar to: howto reduce the ping?

Hi. The task: 1. There 3 servers and a router with 2 PPPoE connections (let call them: ppp0, ppp1). 2. There are several groups of Inet-clients to be served (Servers, Clients and Club). 3. The task is: - to route Club through the ppp1; - to Servers and Clients through ppp0; (Next is reproduced from memory and may be slightly incorrect) router # netstat -nr Kernel IP routing table

Hi! Already searched for it and asked in IRC channel but all replies talk about ip_conntrack_irc and ip_nat_irc. I have a rule in 'NEW' section of 'shorewall/rules' to irc: ACCEPT fw net tcp 6667 #IRC and 'lsmod|grep irc' shows: ip_nat_irc 3648 0 ip_nat 22572 8 [...] ip_conntrack_irc

Hello, I''m having some trouble with the u32 port match and that is when specifying a mask. tc filter add prio 1 dev ppp1 parent 2:0 protocol ip u32 match ip dst 0.0.0.0/0 match ip protocol 17 0xff match ip dport 27015 0xffff flowid 2:4 Using 27015 0xffff works just fine, all packets to dport 27015 go to 2:4 tc filter add prio 1 dev ppp2 parent 2:0 protocol ip u32 match ip dst

Hi, currently I''m using 48 class with htb & very stable Is there any maximum number of class I can create in a single linux box ? I need 500 or even 1000 class for campuss network. Any help appreciated thanks & regards Tino _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Hi to everybody. I read some info and documentation but i still can''t find how to make this simple setup for example . I just want to make priority of certain traffic without shaping the traffic . For example SSH and RDP first priority Mail second priority WEB and FTP third And everything else last priority. What will be the simple and best way to achieve this. I will appreciate

Hi.... Help me please!!! I am using Linux Redhat as router of the my network. I am to making NAT and firewall. In my iptables script, I need make 3 MARKs for the same packet, as following # It marks the packets that will go for link ADSL (I have 2 links - adsl 2Mb and ''dedicate link'' 256Mb ) # I am using ''ip rule / ip route'' to make this iptables

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I''ve written a minimal sort of Perl module that dynamically creates and destroys traffic control rules for specific IPs. I''m currently using it for a user bandwidth control application at a client site. The module essentially gets Ethernet device(s), IP address and in/out speeds as input and dynamically creates classes, queues

Hi! I want to upgrade hardware on my router (iptables, htb, >1000 users). Now it is based on usual desktop PC (Intel Prescott P4 3.00 Ghz, 1 Gb RAM). The reason of hardware upgrade is growing up number of users, also we are planning to increase upstream link from 100 Mbit/s to 1 Gbit/s. Iptables rules are now optimized with ipset tool, for tc I''m using hash tables as well. So I

I''m in the process of replacing a Novell server that had a single NIC and routed traffic from our local network to either the Internet or to the Corporate office. I have this configuration working now but we''ve run in to some bandwidth problems. The server that I have set up now is Linux. It uses a different IP for Samba than for the DNS/DHCP and routing (different VMs in

Can anyone tell me what is causing htis by chance? I know it is the application. What's weird is i "fixed' it last time by reformatting the machine to stabilize this one app. Now after a month it crashes again.... Well the steam hlds has started randomaly crashing again. ---------------------------------------------- ---------------------------------------------- CRASH: Tue

I am planning to replace our cisco 7200 core router with Linux. We currently serve around 1500 (3/4 DSL - different router) customers with probably half of them being concurrent at any given time. We have a fiber network and customers currently aren''t managed as far as how much bandwidth they can use at anytime. Therefore I have constructed a working tc qdisc Linux router as a test. It

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! when I activate wondershaper on my dsl connection (pppoa vc mux), i get three errors: # sh -x /usr/sbin/wshaper ppp0 + /usr/sbin/xmlstarter setenv tc_downlink + DOWNLINK= + /usr/sbin/xmlstarter setenv tc_uplink + UPLINK= + [ -z ] + cat /proc/avalanche/avsar_modem_stats + grep Connection Rate + awk {printf("%d", $8)} +

Hi Here is a short description of my network: ppp0 (adsl) ppp1 (adsl) | | | | --------------------- | Router | | Firewall | | MASQUERAD | | DNAT | | | | eth0 | --------------------- | | | ---------------------- |

Hello! My system is: Internet ADSL(PPPoE) ---> ppp0 [LINUX server(router)] eth0 ---> LAN Server(router) is running on LINUX Slackware 8.1. I have recompiled a 2.4.22 kernel, enabled all QoS support in the kernel config, including HTB. My ADSL bandwidth is 256Kbit/s for download and 64Kbit/s for upload. I use the following HTB+IPTABLES configuration, because I want to reduce bandwith for

Hello Mailing list, I have a problem with the prio qdisc and I don´t know what is wrong in my configuration This ist a sample configuration and looks like this: #include "fields.tc" #include "ports.tc" #define X16(i) i i i i i i i i i i i i i i i i dev ppp0 { dsmark { prio(bands 6, priomap X16($be)) { class if ip_proto == IPPROTO_UDP;

Hi. Before start i need to say that i lost a lot of weekends trying every single posible solution on the net. So this i s my last resource. This is NOT an ERROR, is just help to make something work. (sorry for my english) Hi have 3 zones loc eth0 => here we have 192.168.1.0/24 with 12 IP''s/PC''s I can subdivide in 2 tematics zones but if not needed there is no reason to

Hello, I am trying to make a load balance at my box using two conections. I have compile my kernel with this patch routes-2.6.13-12.diff (tha I get from this website: http://www.linuxvirtualserver.org/~julian/#routes). The problem is that when I try to balance using weight sintaxe (i will put the script bellow) some conectios just drop. So I can enter some pages but other I could not...

My dcgui-qt (chat/file-sharing program) doesn''t work and I''m pretty sure it''s my firewall settings. dcgui-qt is a direct connect (file sharing & chat) client. According to the FAQ here (http://dcplusplus.sourceforge.net/faq/faq.php) all I should need to do is: ------- #ACTION SOURCE DEST PROTO DEST SOURCE ORIGINAL #

hello to all i''m trying to set a filter but doesn''t want to work. i''ve set ut the qdiscs and the classes like this : tc qdisc add dev ppp0 root handle 1: htb default 20 tc class add dev ppp0 parent 1: classid 1:1 htb rate 120kbit tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 30kbit ceil 120kbit tc class add dev ppp0 parent 1:1 classid 1:21 htb rate 30kbit ceil

#!/bin/sh PPP=(ppp0 ppp1) IP=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print $3}''`) GATEWAY=(`ifconfig ${PPP[0]}|sed -n 2p|column -s ":" -t|awk ''{print $5}''` `ifconfig ${PPP[1]}|sed -n 2p|column -s ":" -t|awk ''{print