similar to: Acessing multiply servers with same IP''s

Hello good day to all ... this is my setup 1 Linux Wireless Access Point, connected are 4 wireless gateway in which i needed to apply shaping ... ok here is the weird part... clients on each gateway download files from the Acess Point ... a 500 mb file through ftp on gateway 1 which is up to 64 kbps ... the result is from 60-64 kbps speed which is fine ... on gateway 2 which is 128 kbps ... the

Hi all, I am trying to write a script that will compute Kendall's tau for a 75 time series (using the Kendall package) and will then write the tau and p values from the Kendall test to a text file table that can be read into Excel. I am having no problem calculating Kendall's tau and the associated p value for each time series, but I am having trouble figuring out how aggregate the

My hard drive on a Dell Latitude keeps being accessed every 5 seconds for a couple tenths of a second. Is there a way yo shut this off. I suspect it might be related to journaling? Thanks in advance. -- David I. Sommers, Ph.D. Kensington, MD

Hello, How to access to old field values in validate_on_update method? I need to see if there is changed field''s value and if it is so, rise an error. Thank you! --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to this group, send email to

Hi there, I have Samba 2.2.3a configured to access openLDAP 2.0.18 for authentication. The autentication via ldap protocol works fine. Then I tried to enable SSL to connect samba with the LDAP server. Calling smbasswd generates this: #/usr/local/samba/bin/smbpasswd atuttle -D9 New SMB password: Retype new SMB password: ldap_open_connection: connection opened Bind failed: Can't contact LDAP

The assumption that we have an overall irqs_pending flags, and a one-to-one lguest <-> task mapping fails to hold on x86_64, where we can have multiple puppies, aka vcpus. Although ifdefs could be used, it makes the code much more unreadable, and other ports are on the way, anyway. So some sort of acessor is preferred anyway. Signed-off-by: Glauber de Oliveira Costa

The assumption that we have an overall irqs_pending flags, and a one-to-one lguest <-> task mapping fails to hold on x86_64, where we can have multiple puppies, aka vcpus. Although ifdefs could be used, it makes the code much more unreadable, and other ports are on the way, anyway. So some sort of acessor is preferred anyway. Signed-off-by: Glauber de Oliveira Costa

To anybody who can help me I want to acess the VM(Virtual manchine ) in IE brower, the URL is http://localhost:5831 。31 is the vnc display of the VM. I failed to acess the VM , but I can acess the dom0 in the IE brower. How could I acess the VM domU in the IE brower ？ Could the VM be acessed through IE Brower? Thanks PS: Xen 3.0 _______________________________________________ Xen-users

Full_Name: Marc Thibault Version: 2.8.1 OS: Windows XP Pro SP2 Submission from: (NULL) (216.104.125.106) I had Adobe Acrobat 5 and Adobe Reader 9 installed. The .pdf "open" association is to Reader. When I selected "Help | Manuals(in pdf) | An Introduction to R", it brought up the file in Acrobat instead of Reader. After making sure the default associations were correctly

Hi List, This one is puzzling me. I suspect it is largely due to a badly-behaved installer, but I would appreciate any help. I'm so puzzled, I'm not even sure how to explain the problem, but here goes... I have a Samba 3.0.1 system on AIX 5.2, which a number of XP users connect to, in order to access an application installed there. The upgrade installer for said application is causing

Hi, my box is connected to 3 networks, eth0 eth1 wlan0. I want "my" traffic to go via wlan0 and everything from eth1 NATed to eth0: eth0 192.168.1.10/24 eth1 172.16.1.1/12 wlan0 192.168.10.190/24 I first tried this with two single hosts: iptables -A POSTROUTING -j MASQUERADE -o eth0 -t nat iptables -A POSTROUTING -j MASQUERADE -o wlan0 -t nat echo 200 Forw >>

Hello, I have the AR9285 wireless adaptor on an HP DV6-2128ca notebook. I can see it. it comes up in NetworkManager but never gets an IP. the router is a linksys using WPA/PSK security. Would/could someone please help me out trying to get this to work? Output of several commands follows: dmesg: ath: EEPROM regdomain: 0x69 ath: EEPROM indicates we should expect a direct regpair map ath:

I just installed an Asus PCE-n13 wireless card into one of my CentOS 5.6 systems. It uses the RaLink 2680 chip set and I was able to get the driver loaded using modprobe rt2x00pci.ko. I saw no error and now see that the module is loaded along with mac80211 and other dependencies. Now I need to know how to create the wlan0 device. I can find nothing via Google searches on how to create that

Hi, Folks -- I'm setting up an Acer Aspire 5250 as a Christmas gift, CentOS 6 netinstall insists on trying to configure wlan0 but I'm using a wired DSL connection, consequently netinstall fails and only offers the option to Retry. How can I get it to bypass the wlan0 idea and go straight to eth0...? Thanks, -- -- Jeff -- <http://www.wellnow.com> "There's nothing

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

I'm trying to bridge a wired network and a wireless network, but I'm having some trouble. No traffic seems to be passing through the bridge. When I issue a "showmacs" command to brctl, I am able to see MAC addresses from both networks. I am also able to ping both networks from the bridge machine. When I issue a "showstp" command to brctl, the wireless access

I am trying to shape a client (somewhat advanced). This is my target: Client is 192.168.2.224. I would like to allow him to download with 500000 bits/sec in general. But, for a specific port(say 22), i would like him to download with 300000 bit/sec only. The problem is that my configuration (maybe wrong) allows him to download with 800000 bit/sec. (500000 generally + 300000 on port 22) I thought

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm

On Thu, Mar 30, 2017 at 06:15:28PM +0100, Nux! wrote: > Use libvirt with mac/ip spoofing enabled. > > https://libvirt.org/formatnwfilter.html > > https://libvirt.org/firewall.html > > -- > Sent from the Delta quadrant using Borg technology! > Thanks Nux and Kristian but I don't see if these solutions will be really efective in my environment. Let me to explain.

I have a Broadcom 802.11b/g hardware on my dual-boot laptop. Note first that in the WinXP partition, the wifi makes DHCP connections to my router with no problem. Since this was not working in my new CentOS 6 partition, and remembering that there was a driver problem with the old Fedora partition it replaced, I followed instructions founs at: