similar to: private to public IP

Hi all, As I read into the forum, NATting (SNAT) is expensive, using iptables to translate IP sucks the performance of the system. I just want to know if IProute2 can handle NATting and if it handels NATting can it performed faster than iptables? thanks, Wennie

Hi all, If I am going to recompile my Kernel features needed to be enable for TC use? I using Fedora Core 2 64 bit with kernel version 2.6.10-1.771, with this version do I need to recompile the kernel or everything is ready? How Wwould I know if my existing kernel already supports tc? Thank you very much and best begards, Wennie

Hi All, This is out of the topic question, but I''m hoping that you can help me. If for example I''m going to install a Fedora 4 64-bit with 8 to 12 Gig of physical memory, how much swap file of directory do I need to create? Thank you very much, Wennie

I''m trying to shape each machine on an interface to 256k each, but I''m getting stuck and only able to shape an entire interface to 256k. What should I be doing differently here? tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 100MBit ceil 100MBit tc qdisc add dev eth0 parent 1:10 handle 110:

Hello, list members, can i limit pps rate with linux? How? -m limit does not fit, as i understood: it can help with low rates only (is that true? any suggestions?) Thank you, -- _,-=._ /|_/| `-.} `=._,.-=-._., @ @._, `._ _,-. ) _,.-'' ` G.m-"^m`m'' Dmytro O. Redchuk

Hi all, Im using iptables "SAME" Network Address Translation I just want to know how can I verify and log which private IP is using the Public IP. Can you please guide me on the step by step procedure or direct me to the site? Thanks, Wennie

Hi, Has anyone used TC in a wireless environment, which is dynamic. I understand that the parameters for queuing are static and cannot be changed unless the queuing discipline is deleted and reloaded with different parameters. If anyone can share any experience, that would be helpful. Thanx. Azim. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

Which kernel supports the iptables'' -m dstlimit? Do I need a patch or something else to get it to work? Is it too experimental? -- Покотиленко Костик <casper@meteor.dp.ua>

Hello I''ve setuped a bridge with iptables + layer + ipp2p + tc I don''t know how to shape passive ftp ? If I put rules on port 20, 21 or using layer 7 iptables accounting still empty ... When I done a tcpdump I can see that othe port than 20 or 21 are used ... Any Ideas of how I can achieve this ? Regards

Hello, can anybody interpret what the following means: [root@funke ipp2p-0.8.0]# iptables -t mangle -A MarkList0x666-ipp2p -p tcp -m ipp2p --edk -j MarkSet0x666 iptables: Unknown error 4294967295 ----- I have installed ipp2p-0.8.0 via: make copied ipt_ipp2p.ko to my kernel lib dir copied libipt_ipp2p.so to my iptables lib dir insmod ipt_ipp2p gives the following in dmesg: IPP2P v0.8.0

Hello! I have a quite complicated setup. In my network on each interface there is bandwidth limitation for each user. Booth outgoing (on interface itself) and incoming (attached IMQ) traffic. There is main HTB class which limits bandwidth for whole interface and HTB subclasses for each user. Filtering is done with hashing filters. This setup was working correctly. But now in the network I

Hello members. I wanted know if htb shapes download speed and upload speed too? i want to give a client 128/64. so is it possible to give 128 download download speed and 64 upload speed.I mean 2 way traffic control. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I''ve written a minimal sort of Perl module that dynamically creates and destroys traffic control rules for specific IPs. I''m currently using it for a user bandwidth control application at a client site. The module essentially gets Ethernet device(s), IP address and in/out speeds as input and dynamically creates classes, queues

Hi to all, i''m following this guide (http://www.opalsoft.net/qos/DS-28.htm), is very detailed, but i''m a bit confused about queuing disciplinse of leaf classes. In this guide the author uses PFIFO (see the scheme that i attached at message) in this way: # tc class add dev eth0 parent 1:21 handle 210: pfifo lmit 10 # tc class add dev eth0 parent 1:22 handle 220: pfifo lmit 10 #

The problem is that I have only 2 ethernet adapters in my linux router, one of this adapter pluged to the LAN and the other is pluged to a HUB who have 2 routers DSL. Each DSL routers have an static ip and the solution that I found was creating an eth0 and eth0:1 but with this option I have any way to use the eth0:1 adapte... Any one knows a solution for this ? Regards.

Hello I''m trying to switch from IMQ to IFB but I have a problem with traffic marked by ipp2p module. Looks like when traffic is redirected from ethX to ifbX it looses information about MARK. Here''s what I do to get ingress traffic to go to ifb interface: $TC qdisc add dev eth1.42 ingress $TC filter add dev eth1.42 parent ffff: protocol ip prio 10 u32 \ match u32 0 0

A few days ago I had a very big problem with tc. On the machine tc is used in many ways: - from crontab to load night-time and day-time bandwidth (at 1am and 8am) - from crontab to get statistics for qdiscs on WAN interfaces (every minute) - from perl/php database for changing user bandwidth (sometimes) What happened: At 1am the night-time bandwidth should be loaded. tc hanged up, and also

I made some changes to IMQ, so it is now possible to have custom numbers for IMQ devices. Useful when working with VLANs. You can get it at http://tuxpowered.net/. Readme is on the website. -- | pozdrawiam / greetings | powered by Trustix, Gentoo and FreeBSD | | Kajetan Staszkiewicz | JID: vegeta@chrome.pl | | Vegeta | IMQ devnames: http://tuxpowered.net

Hi everyone! having a slight problem with the installing the cloud provisioning module [code] http://docs.puppetlabs.com/guides/cloud_pack_getting_started.html [/code] everything worked until I wanted to actually try to fire it up: [code] >puppet node_aws list Error: Could not autoload puppet/face/node_aws/fingerprint: cannot load such file -- guid Error: Could not parse application

I have 2 ADSL ad1 and ad2 , one PC for my firewall and some deamon on it with 3 ethernet : eth0 connect to my LAN ( 192.168.60.0/24 ) and 2 other connect to ad1 and ad2 |eth1 (10.0.1.2)--------------------ad1 ( ADSL 1 ) | My LAN(192.168.60.0/24) |---------eth0( 192.168.60.2)--> PC | |eth2 (10.0.2.2)---------------------ad2 (ADSL 2 ) All computer in LAN has default router =