similar to: Trouble selecting network interface by port

Is there some tool for UN*X that basically checks if a file is a valid, intact, OGG file. I have had some bit rot and need to know what works and what doesn't, without having to listen through it all. -- Björn Lindström <bkhl@privat.utfors.se> Home page: http://hem.fyristorg.com/bkhl/ Blog: http://bkhl.livejournal.com/ Elektrubadur demo: http://hem.fyristorg.com/bkhl/elektrubadur/ ---

I need some sort of utility to calculate a checksum of an Ogg file. Two differently encoded Ogg:s should give different checksums, but the same file with different tags should give the same result. (The serial number doesn't work here, obviously. I need something that is changed if a bit of the file is lost.) -- Björn Lindström <bkhl@elektrubadur.se> http://bkhl.elektrubadur.se/

I found that in my kernel config : # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set But no CONFIG_IP_ROUTE_MULTIPATH_CACHED. -----Message

Hello, I have a webcam that I wish to view from the internet. It is a wireless linksys model with an ip address of 192.168.1.15. I have it set on port 8081, 192.168.1.15:8081. I am using the IP Masquerade HowTo script. Here's the rule I added to my firewall script: EXTIF="ppp0" INTIF="eth1" EXTIP="`$IFCONFIG $EXTIF | grep inet | cut -d : -f 2 | cut -d \ -f

ei tuka imam edin pf conf obache pravi mnogo nomera, kato se pusne parvoto koeto e dropva paketi, timeoutva po serverite i t.n.. i speed-a e mnogo baven, vijte ako nqkoi moje da otkrie generalna greshka da reply :) vapreki che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set

Hi all, I need a little help, i am studing htb to control user bandwidth (download/upload) and I made a script as below to test. I am testing using ttcp tool from by linux box to other linux (192.168.200.51). my box <---- Linux = more than 128kbit mybot -----> Linux = get 128kbit But I want to control both ways, what am I missing? script: EXTIF=eth0 INTIF=eth1 TC=/sbin/tc DOWN=128

I suppose a few questions pop up on this list about access Samba through a firewall. ?I have been very successful running Samba through a firewall, until today. ?I hit a stumbling block. I have a Linux Firewall with the public IP Address of 134.x.x.140 <it is not the exact ip address, but close>. ?I am using NAT and port forwarding to send traffic destined for 137, 138,139, and 445 for BOTH

Hello, I''m trying to configure a machine to send mail traffic out on eth0 and web traffic, via Squid, out of eth1, with the default gw on the eth0 interface. After spending most of the day of trying this and that and reading docs until my eye hurts, I have had zero luck making anything work expect for standard routing. The Advance Routing Howto makes it seams easy to do this, but I fear

Hi all, I´m running a server that frecuently needs to open a pptp session with a remote server outside my Company. This server is running behind a Shorewall firewall and I don´t find information in Shorewall web page because there is no information in the link http://www.shorewall.net/PPTP.htm#ClientsBehind Nowadays I can connect this server with the remote one but te session is closed after

Hello everyone, First of all, this is my first posting here, so feel free to tell me if I'm asking the wrong questions in the wrong place. I've discovered that the target triple normalization which used to be done at all times on sys::getDefaultTargetTriple() has been removed, due to the fact that most users of this function explicitly call Triple::normalize() on its result. This has

Hello, I am trying to get LDAP running. So far, the server is running but I cannot connect to port 389 or the server using webmin or phpldapadmin. It could be my ISP has blocked this port but I'm not sure. I have tried to telnet to port 389 but it is refused. All other services run fine. I user the iptables ruleset found in the IP-Masquerade HowTo. Below is the ruleset I follow for

I''m using htb classes on my firewall to queue traffic and implement different restrictions on different protocols. tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb default 190 tc class add dev eth0 parent 1: classid 1:3 htb rate 2mbit burst 30k tc class add dev eth0 parent 1:1 classid 1:90 htb rate 50kbit ceil 384kbit burst 5k tc qdisc add dev eth0 parent 1:90 handle

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Hi, still trying to understand one thing. I would definitely like to tell iptables to accept all packets coming from remote vpn only if they hit the $VIRTUALVPNINTERFACE. I tried -o ipsec0 but this is not working, looks like ipsec0 device doesn't exist or it is not recognized. I red on the Openswan users list, that Linux kernel 2.6 native ipsec don't create ipsec* interface (if I am

Hi there. My name is Lucas and I''m from Argentina. Firstly, forgive me for my english since it is not my native languaje. Now, I''ve been reading on how to compile iproute2 and found that I need to add the following to my kernel, which in my case it is 2.4.20, and it is also the one which this document I read talked about: CONFIG_NETLINK=y CONFIG_RTNETLINK=y # CONFIG_NETLINK_DEV

Hi, this is a followup to "Problem with HTB and ceil", the problem with the ceiling has been resolved, thanks to the memebers on this m/g. Now I have the problem that packets get into the correct classe with the correct marks but the prios are not respected. I have 4 different classes: 1. voip class / prio 0 / mark 100 / voip traffic 2. ACK class / prio 1 / mark 200 / ACK packets to

Easy question here: I have a test network that looks like this (apologies for my lack of ascii skills): [hostc]---------------[Firewall]192.168.42.1 (EXTIF: eth0) /10.0.0.1 (INTIF: eth1) 192.168.42.10 (wan) |(lan) | +-------------[hosta] 10.0.0.10 (port 4242) | +-------------[hostb]

I am using the madwifi driver with the patch to allow changing of the MAC address and I have two other ethernet interfaces plus a pppoe interface. My outbound connection is ppp0. I have ath0, eth1, eth2 for internal interfaces. I have added these three interfaces to br0. Once the traffic leaves the linux router, it gets NAT'd and goes out through ppp0. All traffic on all segments works

Hi All, concerning the problem when running the "ip ru ls" command. I faced with the same problem, and I solved it by making sure to include the following settings into the kernel configuration (2.4.18): CONFIG_IP_ADVANCED_ROUTER=y <=== CONFIG_IP_MULTIPLE_TABLES=y <=== CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y

Hi, I am trying to set up a uPnP server on a Linux box (Debian Sarge Stable kernel 2.6.8). uPnP works using multicast packages for locating servers. This does however seem to fail unless I set the relevant NIC in promiscuous mode. If I do so, it works well. I have added ip route add 224.0.0.0/4 dev eth0 and echo 1 >/proc/sys/net/ipv4/ip_forward and the kernel is set up to enable