similar to: How

Hi Ive been reading, testing and applying what Iam reading in the LARTC tutorial for a couple of days, I do not wish to use ready made scripts because that means I will always come back and ask the same question again. So Ive been wondering if I have 10 computers and I do want to limit the download for each of those 10 computers to 10 kbyte per second. I would create a leaf class and match the

Hi Iam using the script below to limit usage for the computers on my lan with respect to download and upload I have a 256kb up and 256 kb down connection, I want limit the speed of each computer to 64kbyte down and 32 up as a maximum. The script below works however it limits the up and down of the whole specified network to 64/32 ... what do I have to edit so that the script handles the requests

Hi Iam using the script below to limit usage for the computers on my lan with respect to download and upload I have a 256kb up and 256 kb down connection, I want limit the speed of each computer to 64kbyte down and 32 up as a maximum. The script below works however it limits the up and down of the whole specified network to 64/32 ... what do I have to edit so that the script handles the requests

hey guys i am regulating the traffic to & fro by my network through a linux gateway , its behaving strange. i regulated Downlink to 2Mbps & UPlLINK to 500Kbps. both perform well when those are done independent i.e. one at a time but when i do both from a client system ..the downlink however continues at 2mbps but the uplink falls down to 100kbps? is something wrong with my script or

Hi all, I''m sure I''m soing something wrong here. I am trying to set up a rate limit inside another rate limit. eg. I have a 512K rate limit on a particular VLAN. I am using an IFB so that packets passing through the bridge are counted at each port.(ie the throughput is limited to 512K, not just the traffic in one direction.) This part works OK, but I also want to limit a

Hi All, I found 2 unusual behavior with u32 classifier in Kernel 2.4.12. I’ve u32 compiled as module. 1> u32 filter seems not working if there is already some fw filter used for some other class. In order to get u32 working I’ve to delete root class, which in terms delete all fw filters too, and then same command for u32 works. fw is also compiled as module. 2> If I add u32 filter to my

Hi, In my LAN Iam trying to make following setup: - All the traffic generated by 10.0.2.1 should go to 10.0.2.11, If the destination of this traffic is internet than it should be placed on its interface eth1. Outgoing traffic on eth1 should be shaped.For this I am using fw filters and cbq. _______ 10.0.2.1 -------> 10.0.2.11(eth0 )----| A

Hello! I have a problem here. I set up a Linux 2.4 machine to do bandwidth limiting for some of our customers. Current setup is something like this: |--------| backbone |-------| |---------| |Internet|225.1-----------225.10|limiter|228.1----228.10|cust. gw2| |--------| | eth0 |-------| eth1 |---------| | 225.20

Hi, I''m trying to modify the Wondershaper script so achieve the following. 1. Prioritize traffic to the few IP addresses. 2. Everyone else should get a fair amount of bandwidth The problem I am facing is when I run this script is that the bandwidth seems to get halved. I tried to apply this script to a site where the upstream and downstream were fully saturated. I immediately saw

all: I"m just trying to create a simple rsvp session to familiarize myself with the protocol. I don''t ever get a rsvp RESV message only PATH AND PATH TEAR messages. There is a timeout but i''m not sure whats causing it exactly. Can anyone shed some light on why? All the configs and output are below. Please let me know if you need more information. Thanks. Jon Test

I need to shape traffic from some IP on one LAN, but I''m in trouble. There is a linux 2.4.26 connected to the Internet (eth0) / LAN(eth1) doing NAT. I''m using VLANs in the LAN Interface, that is connected to a 3Com SuperStack II in a 802.1Q tagged port. I want to create a class that will limit the traffic at 384Kbit/s. I want to create two leaf classes that limit the traffic at

Hello all, I''ve got a couple redundant (Spanning Tree Protocol) boxes running FC1 minimal install + bridge-utils and they are working great for QoS + ntop monitoring. I''m wondering if I should handle the VoIP traffic a little differently. I don''t mind letting VoIP and Video lend out traffic when it isn''t being used, so that''s why I gave them such

Hello everyone, I''m a newbie experimenting with CBQ shaping and am facing a few problems. Can any of you please help? TEST SETUP: +---------------+ +----------------+ | 10.0.0.103 |----------->| 10.0.0.102 | +---------------+ +----------------+ 10.0.0.103: Linux, 100Mbit/s NIC 10.0.0.102: Windows, 100Mbit/s NIC, iperf tcp server (ports 2000 and 2001) WHAT I

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Guys Ive got an internet cafe on which I have a debian sarge box running. The Debian box acts as a gateway and it has masquerading on. I have 40 client PC and i do not want to assign more than 64k per pc for upload and the same is true for download too. Ive done alot of research and Ive read tutorials about CBQ and HTB. I found that CBQ.init is

Hello everybody, I have a Linux router with an ethernet adapter and a ADSL device. My router has a GRE tunnel connected to a remote IP address. Using "tc" I have configured 3 different classes: 1. 290kbit rate (used for Voip Services) 2. 180kbit rate (used for GRE tunnel) 3. 80kbit rate (for generic data traffic) For each class, using "iperf", I send some data from a PC

Hello all, I am testing CBQ and HTB these days and I got a lots problem which needs your help. It is a little long text :) Thank you! (All my test is based on Redhat Linux9.0) 1.Is isolated of CBQ working? I have read Mr. stef word that he never made cbq isolated work. 2. I have setup an environment to test cbq: one tcp flow which I should protect and a noisy udp flow who will eat much of the

Dear members I''m new to this list and also new to tc command. I have a subnet with over 30 pc which have ip addresses from 172.16.1.1/16 range.I want that each computer in my subnet can work with internet with maximum 6k for download and maximum 6k for upload.when i run the following tc commands from my bridge the first pc works well but the second pc can not work with 6k and it has an

Hi, I have been modifying the Wonder shaper to include another queue. My understanding was packets would be de queued to hardware in the following order: cbq1 -> sfq10 > sfq20 > sfq30. Also we only move onto the next queue when the preceding one is empty. However is seems to be prio xx number that reflects the order packets are de queued not to what flowid they belong to. If I

I''ve been following the HOWTO, and reading mailing list discussions about throttling bandwidth, and have had some success, but I just want to tie off some loose ends. Essentially what I am wanting to do is to keep our bandwidth usage below 1megabit, because if we go over we get charged for that traffic. I''ve used some of the examples from the HOWTO to limit our bandwidth, but I

Hi all, I''m having some problems setting up qdiscs on a bridge.The config looks a little like this: ifconfig ifb0 up # Bring up the IFB for this bridge. tc qdisc add dev eth2 ingress tc qdisc add dev eth3 ingress tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8 # Raw qdiscs on each bridge port tc qdisc add dev eth2 root handle 1:0 cbq bandwidth