similar to: Fwd: Traffic Shaping on a Transparent Bridge not working!

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! when I activate wondershaper on my dsl connection (pppoa vc mux), i get three errors: # sh -x /usr/sbin/wshaper ppp0 + /usr/sbin/xmlstarter setenv tc_downlink + DOWNLINK= + /usr/sbin/xmlstarter setenv tc_uplink + UPLINK= + [ -z ] + cat /proc/avalanche/avsar_modem_stats + grep Connection Rate + awk {printf("%d", $8)} +

Hi, I''m really new to traffic shaping and try to implement the wshaper.htb script. I have a linux box that serves as vdr, mldonkey, samba, apache and mailserver (imap), connected to my LAN with 100mbit. I''m connected to the inet via adsl with a hardware router/firewall, got 384k downlink 64k uplink. When I have mldonkey running, imap (via Outlook) gets *very* slow (mails with

Hi, I have a question conercing wondershaper. I''m using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I''m not sure if it''s running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growing up to 1700ms - I

Hi I''m looking for a quick recipe for a newbie to control http traffic in my linux gw. My internet is overloaded already and vpn external clients are experiencing troubles (disconnecting in peak hours). Any suggestions ? Regards Guillermo Caracas/Venezuela On Thu, 2004-05-06 at 14:40, lartc-request@mailman.ds9a.nl wrote: > Send LARTC mailing list submissions to >

Hello, 1. I currently have a 128kbps cable link to the internet..and I''m sharing this connection with others. I''ve made the following script(for alocating bandwidth depending on the services used: browsing, squid, games like counter-strike, icmp, ssh), which unfortunately isn''t working very well as the response times I''m getting upon pinging the server

Hi there good people, I''m a newbie in what concerns running Linux on machines other than desktops, so I need help from all you gurus out there :-) I have Linux installed on an old computer (Winchip C6, Pentium clone), acting as a router/firewall for two other computers. Both these machines are connected to the firewall via a dedicated ethernet card each, on different subnets,

I have wondershaper to limit my upload at 400kilobits (my line is 600kbps). I do a lot of torrent seeding and I dont want my pings killed when I''m uploading so I set low prority source ports as follows (by the way, I have bittornet to only use ports 6881-6910): NOPRIOPORTSRC="6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901

I don''t know whether this is the right place to ask, but kindly point me to an FM that I can R if it isn''t. My wife is creating lots of Kazaa traffic, and I am using rsync to create a full mirror of Red Hat''s FTP site, Aurora Linux FTP site, the LDP site, and some other stuff. Clearly, when one is moving well over 100GB over a 128 Kbps link, this is going to take a

Hi, I just installed wondershapper 1.1a on my ipcop firewall box. I have roadrunner cable with a ftp server setup. My download speed is 2mbit (I get 225 KBytes) and my upload is 384kbit (I send at 43 KBytes). What should the settings in wshaper? I can ping yahoo.com at 90msec with little traffic.....and at around 220msec with full upload traffic. Mark

hmm HFSC ? where can i find more informations and examples about the *linux* HFSC ? http://trash.net/~kaber/hfsc/ does not help here -- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

* sorry for the other schema, it came out a mess. I hope this one is understandable. hi: I have this 2 boxes set up like this: 2020::2/128 2020::254/128 3030::254/128 192.168.0.2/24 192.168.0.254/24 192.168.30.254/24 +-------+ eth0 eth3 +-------+

Hi all, ive got 2 internet connections set up via the nano howto (which are working great) and we are running NAT. Was looking in to qos mainly to stop large http downloads/ftp downloads from hogging the line so that browsing for other users doesnt slow to a crawl, but if the line is free and no one is doing anything then for it to use the available bandwith. The wondershaper sounded exactly what

Hi ALL, Here is a weird problem comfusing me for a long time. i''v installed xen 4.0.1 with linux kernel 3.1.0-rc9+ Everything works fine except i cannot ping to the gateway in a PVM domU. i''v installed bridge-utils and brctl show like this bridge name bridge id STP enabled interfaces eth0 8000.00219b480d56 no

Hi all, I''m running some tests with netem and I noticed some strange behaviour that looks like a bug: I''m pinging another machine and adding delay with netem. When I tell netem to give me a 10ms delay, it works fine. The problem is that when I ask for a 11ms delay, it gives me 20ms! It happens for any value between 11ms an 20ms, and it repeats for values over 20ms, now

Hi, My bridging stops when I start a third Xen domain !?!? I have a few domains setup (mail, wiki, pbx). If I start two domains bridge networking works great. But if I start a third, either the new domains does not work or one of the other DomUs stops working! By stop working I mean I can''t route traffic outside of Dom0. I have been looking at this on and off for a couple of weeks.

Hi, Greg, Eddie, I found that in SR-IOV + HVM environment, ping latency depends on ping interval. The NIC is Intel 82576 (1000Mbps), server uses xen-4.0.1, domain-0 is kernel-2.6.32 and HVM is kernel-2.6.31. The server and client are connected through a 1000Mbps switch. The data is as following: # ping -i 1 192.168.0.21 PING 192.168.0.21 (192.168.0.21) 56(84) bytes of data. 64 bytes from

Hello, I have recently started looking at tc and iptables. I have an htb-queue with two classes 1:10 and 1:20 where 1:20 is the default. Then I use iptables to mark all packets I send out on eth1. I then filter marked packets into class 1:10. I expected all packets sent on eth1 to end up in class 1:10, but some packets still go to 1:20. Did I do it wrong? Thank you for any help. regards, David

Hello, I''ve got this problem. There is an linux server with 2.4.24 kernel and pinging from him to internet (or from lan) ping randomly jumps up: 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=387 ttl=59 time=30.0 ms 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=388 ttl=59 time=32.6 ms 64 bytes from fortas.ktu.lt (193.219.160.131): icmp_seq=389 ttl=59 time=34.9 ms

hi all i have problem with my multi-site AD-DC installation, one of my DC, suddently cant start well, i think problem(corrupt) with the LDAP database then i try to re join it, but every time i try to join it i always has issue like this /Finding a writeable DC for domain 'domain.co.id' Found DC pdc.domain.co.id Password for [domain\administrator]: workgroup is domain realm is