similar to: LSA increase? Newbie question

Hi all, I am currently trying to emulate a satellite link, via Netem, on a testbed which is OSPF-enabled. I''d like to set up a Netem box between two routers. Since all routing between routers is dynamic, I''m wondering how to set up OSPF on my Netem box? Could someone indicate me if it is feasible and give me some guidelines to possibly do so? Thanks in advance, Vincent.

Hi all, I am using a redhat 8.x linux box configured with zebra routing software which is also configured with ospfd I have 2 backbone routers running ospf connected to different isp''s I have 3 local routers also running ospf within themselfs and also with the 2 backbone routers (all are linux boxes) router A - backbone router 1 router B - backbone router 2 router C - local router 1

Hello, Please tell me if it's possible to use tinc together with OSPF (instead of static routes in LAN). By OSPF I mean Quagga's GNU/Linux daemon. Namely, I have a group of LANs (private 192.168.x.0/24 each). Each LAN has a GNU/Linux default gateway, 192.168.x.1, that also connects to the Internet via a public IP address (does NAT and firewall for the LAN "behind" it). tinc

This issue may sounds trivial I need to build a Router for send Internet + VoIP traffic. The computers are in a different network that the Phone Gateway. The Computers are going to be send to a 3 Mbps connection using OSPF, in the meantime the phones are going to be send to a T1 using OSPF too. The routing software is going to be Zebra. I need to switch the outgoing in case that the T1 or

I have looked around a lot and couldn't find anything on this. can some one please help? > I have RedHat Linux and have mounted shared drives from WINNT 4.0 SP4. > Samba version v2.0.5a. > > I am having this problem when we mount a shared winnt drive on linux. > the timestamps look all messed up. I am not sure if I did not setup it up > properly or what. Any help

Hi, The network topo looks like this: the original network: router1 router2 | | |----------------OSPF------------| the target network: (we need to insert a transparent firewall between these 2 routers, so a proxy arp is set up on firewall to bridge router1 and router2) router1 firewall router2 |

Thanks in advance! Summary: when I load netem and teql together, teql doesn''t work correctly. (If I load teql only, everything is fine) I loaded both netem and teql. Netem is associated with eth0, and teql is associated with both eth0 and eth1. But traffic only goes out of eth1. Attached are the commands that I used to configure teql and netem (on machine 1), and commands to

Hi, I am using netem to add loss and then adding another qdisc within netem according to the wiki. Then i want to change the netem drop probability without having to delete the qdisc and recreate it. I try it but I get invalid argument: thorium-ini hedpe # tc qdisc add dev ath0 root handle 1:0 netem drop 1% thorium-ini hedpe # tc qdisc add dev ath0 parent 1:1 handle 10: xcp capacity 54Mbit

I''m trying to use tc and netem to delay packets from several different machines as they exit via eth0. Assume two source IPs, 10.0.0.122 and 10.0.0.133. I''d like to delay packets from the first one by 200ms, and packets from the second one by 300 ms. Any other traffic should be sent out normally. Here''s what I tried: # make three classes, 1:1, 1:2, and 1:3: tc qdisc add

I''m trying to setup a netem delay with no luck (using iproute2-2.6.8, compilation broke during arpd compile, so I use the tc binary in the tc/ subdir, there''s also a q_netem.so there). kernel is 2.6.8.1, compile with CPU cycle counter as time reference. I was using sch_delay of 2.6.7 happily with something like: tc qdisc add dev eth0 root 1: delay latency 1ms rate 35M now I use:

Hi everybody! I have intended to use library(lsa) on R 64-bits for Windows but it was not possible. Every time I try to launch library(lsa) function R give me back next message: Loading required package: SnowballError : .onLoad failed in loadNamespace() for 'Snowball', details: call: NULL error: .onLoad failed in loadNamespace() for 'rJava', details: call: stop("No

Hi! We want to run TCP streams to several port numbers through one interface, each with a different delay set by Netem. E.g. TCP streams to port 80 could have 50ms delay, while TCP streams to port 81 could have 100 ms delay and so on. We have tried to solve this by using a combination of tc filter and netem rules, but we can''t get it quite right. We are considering one class per port,

Hi everybody! First of all, I would like to point that I am newebie in using R. The issue is that I need to install lsa package in R. In theory, I have downloaded and installed all necessary packages to run lsa library, but when I am going to load it I get this message: > library(lsa)Loading required package: SnowballError : .onLoad failed in loadNamespace() for 'Snowball', details:

I am setting up 2 Vyatta routers that will serve as redundant failover core routers out to the backbone of our ISP. They will be serving for routing between other branches and the ISP and bandwidth management. I am trying to differentiate between the plethora of information about having redundant, automatic failover routers and pretty much decided on VRRP for the IP address failover mechanism. I

Dear r-helpers, I can't get lsa to run because: > library(lsa) Loading required package: Rstem Error in library(pkg, character.only = TRUE, logical = TRUE, lib.loc = lib.loc) : 'Rstem' is not a valid package -- installed < 2.0.0? In addition: Warning message: cannot create HTML package index in: make.packages.html() > install.packages('Rstem') Warning in

In case someone else runs into this, I found the problem, it was related to having some zero-length text files. Make sure you have valid (non-empty) data files for loading into the document-term matrix. Alex ---------- Forwarded message ---------- From: Alex McKenzie <ahmckenzie@gmail.com> Date: Mar 25, 2008 2:07 AM Subject: Error "... x must be atomic" when using lsa (latent

Hi all, I''m running some tests with netem and I noticed some strange behaviour that looks like a bug: I''m pinging another machine and adding delay with netem. When I tell netem to give me a 10ms delay, it works fine. The problem is that when I ask for a 11ms delay, it gives me 20ms! It happens for any value between 11ms an 20ms, and it repeats for values over 20ms, now

I''m trying to simulate a satellite link to a Linux server to test application performance. I haven''t used any of the tc stuff before, but I blandly assured people it would be "easy" to set up a simulated long thin pipe on a spare network interface. However, now that I''m exploring, it''s proving quite difficult. Let me start with the general question

As far as I saw, since some microsoft patch for AD, winbind client from samba 3.0.14 (and prior versions) does not work properly for getting users and groups from Active Directory. This problem was solved in 3.0.20. I saw the following text in the samba 3.0.20 changelog: "Disable schannel on the LSA and SAMR pipes in winbindd client code to deal with Windows 2003 SP1 and Windows 2000 SP4

Hello, I'm trying to use the "lsa" (latent semantic analysis) package, and running into a problem that seems to be related to the number of documents being processed. Here's the code I'm running (after loading the lsa and rstem packages), and the error message: > SnippetsPath <- "c:\\OED\\AuditExplain\\" # path where to find text snippets >