similar to: HFSC question??

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and  HFSC so i''m doubt a lot thing and your reply are so very helpful to me ... My question is In HTB tc command question 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify

I have a lot question about tc-command because now i''m doing research to compare performance between HTB and HFSC so i''m doubt a lot thing and your reply are so very helpful me ... my question is 1. I''m use opensource (Mastershaper) for help to config traffic control but when i''m try to config HTB, I''m doubt about in each chain must identify fallback

after i use "tc -s -d class ls dev eth0" will show statistic data about HFSC ,like this root@ubuntu:/home/shaper# tc -s -d class ls dev eth2 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 24 work 13844792199226589188 bytes rtwork 20937281664 bytes level 3461036864 class hfsc 1:11 parent 1:1 sc m1 30720Kbit d 10.0ms m2 30000bit ul m1 0bit d 0us m2

I don''t understand the following: root@jmnrouter:~# tc -s class ls dev vlan1 && tc -s qdisc ls dev vlan1 class hfsc 1: root Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 0 level 2 class hfsc 1:1 parent 1: sc m1 0bit d 0us m2 220000bit ul m1 0bit d 0us m2 220000bit Sent 0 bytes 0 pkts (dropped 0, overlimits 0) period 31304 work 7533852 bytes level 1 class hfsc 1:10

Hello, I''m having such problem with HFSC with following config: + tc qdisc del dev eth3 root + tc qdisc add dev eth3 root handle 1: hfsc default 2 + tc class add dev eth3 parent 1: classid 1:1 hfsc ls rate 512kbit ul rate 512kbit + tc class add dev eth3 parent 1:1 classid 1:2 hfsc ls rate 2kbit ul rate 400kbit + tc class add dev eth3 parent 1:1 classid 1:3 hfsc ls rate 32kbit ul rate

Hi, I''m trying to get a handle on hfsc. Here is my configuration: root@jmnrouter:/jmn# tc class show dev vlan1 class hfsc 1: root class hfsc 1:1 parent 1: ls m1 0bit d 0us m2 225000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:10 parent 1:1 rt m1 191000bit d 25.0ms m2 135000bit ls m1 0bit d 0us m2 135000bit ul m1 0bit d 0us m2 225000bit class hfsc 1:20 parent 1:1 rt m1 22008bit d

Hello All, I am trying to prioratize VOIP traffic from data. The follwing link says that HFSC is better than HTB for shaping VOIP traffic. http://www.voip-info.org/wiki-QoS+Linux+with+HFSC I am in search of good documentation to start with HFSC, I am unable to understand the parameters used. I "googled" a lot to find on how to use HFSC, but no luck. Can anyone of you get me a link To

Hi! Do you know somthing about hfsc and bps? There''s no output for speed only for packets. Doesn''t hfsc support such a field? tc -s class show dev eth0 class hfsc 1: root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 period 0 level 2 class hfsc 1:11 parent 1:1 sc m1 0bit d 18.0ms m2 1000Kbit ul m1 0bit d 0us m2

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings all, Working in concert with the original authors, Klaus Rechert and Patrick McHardy, I have translated their article "HFSC Scheduling mit Linux" [0] on Hierarchical Fair Service Curve (HFSC) into English [1]. http://linux-ip.net/tc/hfsc.en/ Although the original content is not available directly from their website,

Hello, I have finally managed to understand HFSC up to a level which allowed me to create a QoS script which maintains low VoIP latency while running stuff like eMule. Unfortunately, HFSC seems to have a severe bug. Why do I consider this as a bug defenitely? Well, my script runs without any errors, then QoS works perfectly for some hours, no error messages in kernel log. Then randomly the

Hello, I’ve read this Article avout VOIP and HFSC http://automatthias.wordpress.com/2006/06/30/hfsc-and-voip/ I’ve got few questions ? Considering this tc class add dev $DEV parent 1:1 classid 1:2 hfsc \ rt m1 ${UPLINK}kbit d 50ms m2 $[1*$UPLINK/10]kbit \ ls m1 ${UPLINK}kbit d 50ms m2 $[3*$UPLINK/10]kbit \ ul rate ${UPLINK}kbit rt = realtime curve ls = linksharing curve but m1 = ? m2 = ? d =

hmm HFSC ? where can i find more informations and examples about the *linux* HFSC ? http://trash.net/~kaber/hfsc/ does not help here -- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

My problem with HFSC tc command is ... tc command''s HFSC have a lot parameter with 4 curve type SC curve -> umax dmax rate LS curve -> umax dmax rate RT curve -> umax dmax rate UL curve -> umax dmax rate so i''dont know which parameter are appropriate for my test case such real time class which curve are appropriate and good working result. my assumption about

My hfsc rule .. tc qdisc add dev eth2 handle 1: root hfsc iptables -t mangle -N ms-all iptables -t mangle -N ms-all-chains iptables -t mangle -N ms-prerouting iptables -t mangle -A PREROUTING -j ms-prerouting iptables -t mangle -A ms-prerouting -j CONNMARK --restore-mark iptables -t mangle -A ms-prerouting -p udp --dport 4444 -j MARK --set-mark 1 iptables -t mangle -A ms-prerouting -p udp -m

hi, I would like to use the HFSC scheduler for my QoS. I''ve 4 class and 2 of them need to control the bandwidth and the latencies so I think I must use HFSC. So I read some doc ( http://del.icio.us/tag/hfsc ) but its not very clear. I make some tests with differents parameters but I''m not able to use correctly this scheduler: $TC qdisc add dev $dev root handle 1: hfsc default 40

Hello, First I want to point out that I''m not so familiar with HFSC, since there not so much info online. But here is my script: ${TC} class add dev ${LAN_IFACE} parent 1:0 classid 1:1 hfsc ls rate 100mbit ul rate 100mbit ${TC} class add dev ${LAN_IFACE} parent 1:1 classid 1:2 hfsc ls rate 90mbit ul rate 90mbit ${TC} class add

I''m using HFSC to limit bandwidth for our wireless customers. However, I''d also like the bandwidth prioritized based on packet type. This is what I''m trying right now, and I''d just like some input from anyone out there knowledgeable in this on whether it does what I want it to do: Eth1 -> HFSC ........|-> HFSC (User1) (Min 512 Kb, Max 1024 Kb, Burst 1536

Hello mailing list, I don´t know how to use HFSC queuing discipline with tcng configuration language. I become always this error: syntax error near "hfsc" Is it possible, that tcng provides no support for this classful hfcs queuing discipline? Please help! thanks ----------------------------------------------------------------------------

now i''m read a lot of knowledge paper about traffic control in linux because now i''m try to develop and research about traffic shaper so can everybody tell me about my topic ... Is it can do for real???? my topic is " now, many organization use traffic shaper for control traffic and bandwidth because don''t want something example some mac address, ip address,