similar to: Ethernet packet loss - frame errors

Hi! I have a problem with my new Xen setup. I have installed Debian etch with netinstall and I''m using 2.6.18-6-xen-amd64 kernel in my dom0 and 3.0.3-0-4 version xen hypervisor. I''m using four network cards on my system and using three of them as xen bridges and dom0 is using the fourth one only for it''s own. So basicly both of my virtual servers use a network card

Hi, I''ve set up identical (what I think) machines using SLES 10 x86_64, but a new one of those is saying frequently in /var/log/messages: kernel: bond0: received packet with own address as source address A short summary of ifconfig looks like this: bond0 Link encap:Ethernet HWaddr 00:14:4F:2A:12:9C inet addr:132.199.176.78 Bcast:132.199.255.255 Mask:255.255.0.0 eth0

Hi all, I just noticed that my two nics that are bonded via mode 0 are showing the same mac addy in ifconfig. Is this normal? In syslog I keep getting; kernel: pbond0: received packet with own address as source address Some guidance is appreciated before I dive in and troubleshoot. If I don't list the mac addy in my ifcfg-th# files, only one of the 2 nic comes up during boot.

xm list reveals the following information... Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 315 0 r---- 2058.1 Domain-1 11 342 0 -b--- 5.2 9611 Domain-2 12 342 0 -b--- 3.9 9612 Xen seems to be working beautifully but I have not yet figured out how to get Domain-0 to ping both Domain-1 and Domain-2,

Hi all, I'm trying to setup a cluster of 2 machines with Centos 5.2 to host a postfix+spamassassin+clamav+mailscanner service. Below cluster software versions rgmanager.i386 2.0.38-2.el5_2.1 installed cman.i386 2.0.84-2.el5_2.2 installed Every machine (hp blade server ) has 4 interfaces, bounded in this way: Eth0, eth1

Greetings, I have two vms, one is a router and the other one is a client, for some reason, the client vm is unable get ip via dhcp from the router vm. here are outputs: vm1.xml: <interface type='bridge'> <mac address='52:54:00:54:78:be'/> <source bridge='virbr0'/> <model type='virtio'/> <address

Hello, There is a xen setup in which "brctl show" gives the following output. bridge name bridge id STP enabled interfaces eth1 8000.003048c9d4df no peth1 vif1.0 vif2.0

El 21 de febrero de 2017 7:00:03 GMT-05:00, centos-request at centos.org escribi?: >Send CentOS mailing list submissions to > centos at centos.org > > >From: Kahlil Hodgson <kahlil.hodgson at dp.exchange> >To: CentOS mailing list <centos at centos.org> >Subject: Re: [CentOS] Network conections problems > >First guess is that you may have two devices on the

I have two DELL servers with two Ethernet ports in it. Bith servers have CENTOS 4.5 installed. First Ethernet port connect to public Ethernet line and work correctly. Second Ethernet port I connect point-to-point as private Ethernet (cable direct connect without router or switch). Private Ethernet use IP asddress 1.1.1.1 and 1.1.1.2. I check "ifconfig -a" and both eth0 and eth1 are

Group, My linux box, running with Centos-5.5, is showing up (??) a pseudo network interface for Eth0. On Switch where my Eth0 is connected, observed 2 MAC-Addresses. If a DHCP server present in LAN, the second pseudo interface is picking up a DHCP IP Address too. Furthermore you can ping both Eth0 ip and Psedo Eth0 IP from the switch. The intensity of the problem is more when port-security is

Hi List, I am running a x86_64 Centos server, after a reboot the network has decided to not work.. this particular machine has 8 eth ports eth0-7. eth0 and eth3 were bonded (mode 1 ) after reboot the bond did not work. It came up OK but no data was passing through it. all other interfaces on the machine were working. I decided to remove the bond, so after removing the bond i was left with eth0

hello, i met a problem in configuratiion of ipv6 gw in my box i install centos 6.3 (64 bit) on my boxs, which have four netcard. i use a straight-through cable to connect centosv0:netcard-2 and centosv1:netcard2 the topology is this: client c(windows xp) <-->centosv0:netcard-3 <--> centosv0:netcard-2 <---> centosv1:netcard-2 <---->centosv1:netcard-2 <---> client d

im having problems installing my nic card. my eth1 keep on renaming randomly to dev****. whenever i change the ifcfg network scripts at sysconfig and reboot, the nic tends to renamed randomly. i have tried changing this thing from davicom to 3com nic's. dev6278 Link encap:Ethernet HWaddr 00:01:02:91:01:6D BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0

Last problem I had involved changing one character in my configuration scripts. Really easy once someone showed me what was wrong. Well I think this issue is just the same. The moment I used apt to install the Xen kernal and tools I lost internet connectivity. I have been managing because I can restore connectivity be deleting the bridge mpower@dodtsair:~$ sudo ifdown eth0

Hi, I''ve setup a box with xen. For the root machine, it''s ok, it see the network card: alian@yoda:~> /sbin/lspci ... 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 19) alian@yoda:~> lsmod .... sk98lin 208748 1 alian@yoda:~> /sbin/ifconfig eth0 Lien encap:Ethernet HWaddr 00:15:F2:39:D4:DF

Hi All, I am facing an issue regarding communicating a value from outside to a Guest OS (linux, solaris and windows) launched on Xen Server. I did went through this thread, but It was not completely clear. http://lists.xensource.com/archives/html/xen-users/2006-07/msg00473.html My question is - Is there a way in Xen, through which I can communicate a value from outside to a Guest OS (linux,

Hey all I''m new to Linux and Virtualizing. I''m trying to dedicate my nic''s to each virtual server. For instance, virt server A would use nic1 and virt server B would use nic2 and so on. I''ve been reading some stuff for this list and to tell you the truth I''m a bit overwhelmed. We are going to run SLES10.1 and Xen. I would appreciate any assistance.

I am installed Xen 3.0 on a Fedora Core 4(2.6.12-1.1454_FC4xen0) machine. This machine is currently running one host domain: [root@]# xm list Name Id Mem(MB) CPU VCPU(s) State Time(s) Domain-0 0 128 0 1 r---- 49.1 fc4-vm1 1 63 0 1 -b--- 18.5 Following is the network configuration for Domain-0: eth0 Link

Greetings! I finally got the install done for a couple of gust OSs (Win 2003 server & Suse Enterprise 10) Bothe gusts are up and running, but - no networking. My setup: Hardware - AMD Athlon 4200+, ABIT Motherboard, 4 GB of DDR2 RAM, 2 onboard GB NICs Host OS- Suse Linux Enterprise server 10 Xen - 3.0.2_09749-0.4 Config file for Win 2003 server guest: # -*- mode: python; -*-

Hi, I have a strange problem with my networking setup. I read all forums around the world where people had similar problems, but couldn''t find a solution. I have an Attansic L1 gigeth chip on my mainboard. This chip works OK in stock Ubuntu Gutsy (development) 2.6.22-9-generic kernel. When I boot into Xen, and after the bridge is created, the network stops working. Some info: - If I