similar to: HTB_HYSTERESIS

I can use DSMARK to mark on the Egress side. Is there a way to mark/change the DSCP value of an incoming packet on the ingress side? Thanks. Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7

Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 10:30 AM To: lartc@mailman.ds9a.nl Subject: FW: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From:

Hi! I am studying HTB. I used the topology showed below: 10.1.0.1 ------ 10.1.14.25 (eth1) / 192.168.10.10 (eth0) ----- 192.168.10.11 (host 1) (router) (host 2) All machines use Debian Etch. Has a Iptables masquerading rule to eth1 in the router machine . The NICs are 100 Mb/s. The host 1 has Apache 2 and a file with 670 MB (CD ISO image) to download. When I used

I''m trying to configure 4 queues with strict priorities based on DSCP. I tried to following commands, but it seems that the filters I defined have no effect tc qdisc add dev eth0 root handle 1: prio bands 4 tc qdisc add dev eth0 parent 1:0 handle 10: pfifo limit 100 tc qdisc add dev eth0 parent 1:1 handle 20: pfifo limit 100 tc qdisc add dev eth0 parent 1:2 handle 30: pfifo limit 100 tc

Hello, I am trying to mess with a prio type qdisc, and must be missing something. Here''s my sample code: tc qdisc add dev eth0 root handle 1: prio tc filter add dev eth0 parent 1:0 prio 1 protocol ip u32 \ match ip dst 208.0.0.0/8 flowid 1:1 tc filter add dev eth0 parent 1:0 prio 3 protocol ip u32 \ match ip dst 0.0.0.0/0 flowid 1:3 I would assume that any traffic going to

Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 9:35 AM To: lartc@mailman.ds9a.nl Subject: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Jody: I don''t know if you answer basic HTB questions but I''l try anyway. I''m implementing AF and EF with a

Is there anyway to actually see packet stats or that packets are for sure going into a prio queue with TC? I can see all the HTB stats but the prio classes just list as being there...would like more information Basically I have the following setup DSMARK | HTB - (tcindex filter on TOS) | Prio (u32 filter on TOS) Thanks Jon Flechsenhaar Boeing WNW Team Network Services

I want to limit pps (packets per second) not just bandwidth on the ingress side. I can do this using IP tables but I''m curious if there is a way to do this with TC. Thanks. Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7

Hi there! I''ve using HTB for a while and now I an faced with a ''problem''. How hierarchical is HTB? Let''s say I have this 3 layer HTB setup: root class 1: (rate=100, ceil=100) 1: children classes 1:10 (30,100) and 1:20 (70,100) 1:10 children classes 1:100 (10,100) and 1:101 (20,100) 1:20 children classes 1:200 (30,100) and 1:201 (70,100) I managed to have

Hey everyone, For some reason my htb configuration isn''t allowing any class to burst up to its ceiling ever, even when the link is only being utilised by one class that class only ever gets its assigned rate and exactly that assigned rate... The hierarchy I have is 1: at the root with no default, then 1:2 and 1:3 under that, both with assigned rates, then 2: and 3: under those

I posted earlier when I noticed that htb was releasing packets in pairs, even though my burst/quantums were 1 pkt. To fix I set HTB_HYSTERESIS 0 in net/sched/sch_htb.c . This gives a noticable gain in upstream worst case latency, for me with 256kbit/s up I used to see +90 sometimes, now it''s +45. For the many who have 128 up it should limit them to +90 rather than +180. Andy.

Hello, I''m using a script with tc, to limit my outgoing traffic : tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbit burst 6k tc filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip dst 172.28.54.9 flowid 1:1 I want to test bandwidth with iperf to see if limitation is correct. Sometimes, I get correct measure for certain rates,

ALL: <<diffserv-gred_10-06>> I have attached the current script that I am using. $TC qdisc add dev $EDEV parent 2:20 gred setup DPs 3 default 2 grio $TC qdisc change dev $EDEV parent 2:20 gred DP 1 limit $lim min $minTh max $maxTh avpkt $avgPL burst $bursty bandwidth $netBand probability 0.02 prio 2 $TC qdisc change dev $EDEV parent 2:20 gred DP 2 limit $lim min $minTh max

Dear all, I''m making a script to implement DiffServ policies with HTB. Here it is : if test $1 = "help" -o $1 = "h" -o $# != 5 then echo "usage: ds.sh <DEVICE> <DS_RATE> <EF_RATE> <AF_RATE> <BE_RATE>" exit fi DEV=$1 DS_RATE=$2 EF_RATE=$3 AF_RATE=$4 BE_RATE=$5 sync tc qdisc del root dev $DEV tc qdisc add dev $DEV root handle

I''m using KOM_RSVP I''m trying to figure out what trigures and RSVP session. When I send traffic with a certain utility the RSVP PATH, RESV, and CONF message is sent. How does the Deameon know to setup a connection though? There is something internal at the client source happening. I just haven''t figured it out yet. Is it listening to a certain port? Any help would

Does anyone on hear have any thoughts on the changes that would be nessary for KOM RSVP to use HTB rather than just CBQ and HFSC? Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7

All: I''m trying to get RSVP running on a Linux machine. The machine is currently Fedora. I have read rfc 2205. Does anyone know where I can get the RSVP source code to install on the machine. Or does anyone know of some documentation that might help in doing this? Thanks, Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7

You guys have expressed interest in CCNA training. What would be better for you guys. On-site training after work hours or during the wkend? The other option is after hours or wkend at a near by college. Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7

All: I am tasked with creating an environment in which DiffServ and IP precedence is handled as close to RFC specification as possible. I have a few problems with implementing this based on current queueing structure. Here are a few of my questions. 1.) Is there any way to get DiffServ AF drop levels without using DSMARK and GRED? Ex. AF11 Gred DP 1 AF12 Gred DP 2 AF13 Gred DP 3 2.)

Hi, I''m trying to divide my bandwidth between different services, but I''d like to take into account the number of active users. For example, l want divide my bandwidth between HTTP and SMTP and guarantee HTTP 80% of the bandwidth. However, I have many users on my system (tens of thousands) and if only 1% of my active users are using HTTP (and the other 99% SMTP), I''d