similar to: modprobe ifb

Hi all, I''m having a hell of a time getting my IFB to work. I know I''ve done this before, so I''m missing something stupid. Can anybody tell me what it might be? Configs as follows: -------- #!/bin/sh modprobe ifb numifbs=1000 modprobe act_mirred modprobe 8021q brctl addbr br0 brctl setfd br0 0 brctl stp br0 off brctl addif br0 eth1 brctl addif br0 eth2 ifconfig eth1

Hi all, Can you tell me where is the documentation for the new IFB (implemented in kernels > 2.6.16). Thanks in advance! Nikolay

Hello What I''m looking for is how to configure the Linux QoS module to do global rate limitation for two (or more) 802.1q pseudo network devices. I naturally suppose there is a possibility with IFB. I don''t want to use IMQ because it''s not integrated to my kernel v2.6.21.1 and I didn''t find IMQ patches for it nor for the iptables package I use (v1.3.7).

Hello Tom! After i read and analyze some docs about IFB i decide that for implement this feature in Shorewall not need more efforts (of course i may be wrong). If we have 'ifb0' device then we must activate ingress discipline on real device (f.e. eth2) and redirect 'egress' from it to 'ifb0'. tc qdisc add dev eth2 ingress tc filter add dev eth2 parent ffff: protocol ip

Hi all, I''m having some problems setting up qdiscs on a bridge.The config looks a little like this: ifconfig ifb0 up # Bring up the IFB for this bridge. tc qdisc add dev eth2 ingress tc qdisc add dev eth3 ingress tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8 # Raw qdiscs on each bridge port tc qdisc add dev eth2 root handle 1:0 cbq bandwidth

Hello! My goal is to setup an ingress traffic shaping on my PPPOE DSL line with ifb. My old imq stuff used iptables marks (like ''iptables -t mangle -A PREROUTING -p tcp --sport 22 -m length --length :500 -j MARK --set-mark 31'') to classify the traffic and since i am lazy, i tried to to reuse them with ifb. But no luck: iptables marks the packets well, but tc

hello, i have eth0 (Internet) + eth1,eth2 (local), how to i use IFB in real for shaping Download, how to i redirect traffic from eth0 to ifb0 with "mark". I testing marking with iptables but any mark not working - always use "default" mark... thanks _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl

Hello, It seems on RHEL/CentOS 5.2 iproute package is version 2.6.18, which apparently do not support IFB properly. The end result is that while no error is given, counters on ifb0 do not update, and capturing on the interface turns out nothing. Simply replacing tc with one from 2.6.26 solves this issue, it seems... Best regards -- Haim Gelfenbeyn Hagel Technologies Ltd.

Hi all. I''m using Jamal''s ifb virtual interface from new kernel. Redirecting incoming traffic from external interface like that: # tc [blahbla] match u32 0 0 flowid 1:0 action mirred egress redirect dev ifb0 to ifb to shape it. The problem is that I''m using MASQUERADE by netfilter also. That redirected traffic coming from internet gets to ifb _before_ DNAT is done.

Hi everybody. I would like to know how incoming ipsec packets (from eth0 for example) interact with ifb device. For example: I want to redirect all incoming packets from eth0 to ifb0 for shaping. What happens to esp and the relative clear packets? By default both are seeing on the incoming device.

Dear Community, sorry for the somewhat dumb question. Maybe someone has any pointer to how to setup the RED queue to mark pakets with ECN. In particular what are appropriate parameter settings for limit, min, max, etc. All my trials end up with either "RTNETLINK answers: Invalid argument", although the command line (at least for me) looks fine in regard to what is said on the

Hi all, I''m having a hell of a time getting tc and IFBs to co-operate. I''ve copied the following from http://linux-net.osdl.org/index.php/IFB: -- export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: prio $TC qdisc add dev ifb0 parent 1:1 handle 10: sfq $TC qdisc add dev ifb0 parent 1:2 handle 20: tbf rate 20kbit buffer 1600 limit 3000 $TC qdisc add dev ifb0

How to use IFB as replacement of IMQ There is not much documentation about it Please explain with example -- Failure seldom stops you. What stops you is the fear of failure. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

I''m experiencing a problem with masquerade downloads saturating my internet connection. I''ve implemented an IFB and now am looking into flow keys. Although I''ve read the documentation, I''m not sure I have this right. Can someone help? /etc/shorewall/params: MID_IF=eth0 MID_IF_TC=1 INET1_IF=eth1 INET1_IF_TC=2 INET1_IFB_IF=ifb0 INET1_IFB_TC=3 Note: MID_IF

I''ve network with NATed hosts. I want to catch only all traffic going from my server, but I don''t want catch NATed traffic from LAN. I need only traffic going from/to my server (traffic from INPUT, OUTPUT chain in iptables) (like SSH, postfix, WWW or proxy). This is throw all traffic from my LAN to IFB: $TC qdisc add dev $iface_lan handle ffff: ingress $TC qdisc add dev

Hi all, Further to my previous questions, I need lots of IFBs on this thing. I have configured IFB as a module, and issuing a modprobe ifb loads it, but only gives me 2 IFBs (ifb0 and ifb1). How can I get more? I''m probably looking at needing about 20 on this project. Regards, Leigh Leigh Sharpe Network Systems Engineer Pacific Wireless Ph +61 3 9584 8966 Mob 0408 009

On 2017?08?31? 22:30, Willem de Bruijn wrote: >> Incomplete results at this stage, but I do see this correlation between >> flows. It occurs even while not running out of zerocopy descriptors, >> which I cannot yet explain. >> >> Running two threads in a guest, each with a udp socket, each >> sending up to 100 datagrams, or until EAGAIN, every msec. >>

On 2017?08?31? 22:30, Willem de Bruijn wrote: >> Incomplete results at this stage, but I do see this correlation between >> flows. It occurs even while not running out of zerocopy descriptors, >> which I cannot yet explain. >> >> Running two threads in a guest, each with a udp socket, each >> sending up to 100 datagrams, or until EAGAIN, every msec. >>

Hi, I''m looking for info about IFB devices and how I can use it to incomming traffic shapping. Has IFB any web about it? Do any body known where I can find more info about it? I found this: http://linux-net.osdl.org/index.php/IFB But I can''t stand fine how to use it to allow many ifb''s devices or how to use it with "tc actions". Any help? Thanks --

Hi folks. For quite a while, I tried to use linux (cbq and htb) to control bandwidth in order to replace a cisco equipment used to play this role on our network. After trying here and there, with a bunch of different distros, different versions, different compilations, ... the closest I could get was as follows: (using htb.init and cbq.init) Desired BW ==> Achieved BW 128k ==> 404.78