similar to: Shaping based on Vlan tag

Hi, I want a way to traffic shape pppoe encapsulated pkts based on its src/dst Ip address. Is there any way I can mark pppoe encapsulated pkts? Samit

re I would like to do some firewalling and p2p shaping/limiting on one of the vlans in my network and I was thinking of using linux box as transparent bridged firewall/limiter. For this I''m planning to use AMD64 2.2Ghz box with 2 1gbit NIC (Broadcom 5721), that will be bridged. The box must be totally transparent and unseen in the network, as well as it should have much influence on

Hello At first I must tell you that I´m a real newbie with Linux (and english as well...) I´m using 2 vlans and shaping works quite well without vlan Now I want to do load balancing at these vlans. Any vlan should get the same minimum/maximum bandwidth of download and use the bandwidth that isn´t used by the other one at the moment. But with vlan the shaping doesn´t work. Can you please tell me

Hello, I have a linux box sitting between (and bridging/firewalling) 2 LAN segments. I''m using Bridge/Netfilter/IMQ/tc(htb) to control (shape) mail/web traffic that traverses the 2 networks. The networks also have some VLAN tagged traffic flying around. My linux box behaves OK with VLAN traffic except that the shaping doesn''t seem to work. Normal http shapes alright but as soon

Here are some notes I have about Linux bridging. I''ll try to separate what I know I know from what I think I know. Let''s say I want to bridge eth0, eth1, and eth2 together, all with an IP Address of, say, 1.2.3.2. This is how to do it: echo "Setting up br0 to bridge eth0 with eth1 and eth2" /usr/sbin/brctl addbr br0 /usr/sbin/brctl addif br0 eth0

Hi, thanks for the feedback. > This is an interesting problem. I wonder how you would solve it if you > would have a real (managed) switch instead of tinc to connect the > access points and bridge nodes together? in the backbone we have HP ProCurve switches and all of them (except for the oldest series from more than 10 years ago) separate their forwarding database per vlan. HP calls

Hi all, I am testing one QOS system, I want to control bandwidth by VLAN id. Here is my test network: Internet Gateway | | QOS control box ( Bridge box, Redhat 9, 2.4.28 kernel with ebtables-brnf-8_vs_2.4.28 patch) | | VLAN Switch | | PC PC In my QOS control box, it is a bridge box, I used Redhat 9, 2.4.28 kernel with ebtables-brnf-8_vs_2.4.28

Hi, [sorry for the crosspost, I don''t know whether this is a routing or ebtables problem] I want to redirect all HTTP traffic passing through my bridge to a squid proxy on another machine. However, setting up brouting as suggested in the ebtables examples doesn''t work and the packets get dropped on the floor completely. /\/\/\/\/\/\/\/\ +----------------------+

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=570 kaber@trash.net changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |INVALID ------- Additional Comments From kaber@trash.net 2007-05-26

Hi to the ML. I''m new to VLAN configuration, and combining it to XEN is a bit difficult. I want to use VLAN because it''s possible to "arping" from a domU to an other, and VLAN looks like; the only solution to prevent that. May be I''m wrong if someone got a solution, I may be interrested. I''ve also tryed ebtables, but nothing to prevent arp

I couldn''t find anyone who had actually made it work via google so I guess I''ll ask here. My setup is a VPN point to point link. The VPN is a modified version of Openvpn where I''m using zlib compression to improve the compression a bit. The goal is to shape traffic coming from a routing server through the vpn to the endpoint of the vpn and in such a way maximize the

On Wed, Jul 17, 2013 at 6:06 AM, Qiu Yu <unicell@gmail.com> wrote: > After some digging in openvswitch code. My wild guess is that vlan tag > reconfiguring triggered iface_configure_qos (vswitchd/bridge.c), which > in turn called netdev_set_policing to reset ingress policing rate. > Although there's no ingress_policing_rate set in my case, existing > ingress qdisc still

Hello to everyone, Here is the situation: [LAN1]---[eth3]/----------\ | LinuxBR |[eth2]---[LAN0]---[linuxGW]---[internet] [LAN2]---[eth4]\----------/ Whole LAN is in subnet 10.0.0.0/24. So I need: LAN0, LAN1, LAN2 could not see each other. LAN0, LAN1, LAN2 is in same subnet (10.0.0.0/24). All LANs have to get only internet. How can I configure LinuxBR to do so?

Hello, I am working on an LLVM-based JIT for a dynamically typed language (freemat.sf.net), and would like to commend the LLVM team on an awesome piece of work. One issue I ran into that I was hoping for some clarification. Nominally, I had started out by performing code generation from the AST into a function that was added to the current module. I then ran a PassManager on that module to

Hi, At http://sourceforge.net/projects/ebtables/ you can find the following new releases: ebtables-brnf-3-vs-2.4.22 Changes: - let iptables see VLAN tagged IP traffic - bugfix for queued packets that get mangled in userspace - ebt_among module (Grzegorz Borowiak) - ebt_limit module (Tom Marshall) The patch compiles but I've done no further tests, but I probably didn't screw up.

Hi Rahul, If you're certain that your problem isn't as Stephen suggested, you might want to have a look at this: --- (From http://ebtables.sourceforge.net/brnf-faq.html <http://ebtables.sourceforge.net/brnf-faq.html> ) How do I let vlan-tagged traffic go through a vlan bridge port and the other traffic through a non-vlan bridge port? Suppose eth0 and eth0.15 are ports of br0.

Hello list, I've posted here about this before, but I realise that it may have been assumed that the bridged vlans simply put a switch port in a blocking state and left my question ignored. So to recap. I have two tg3 interfaces named 'in' and 'out' and a bridge named 'br0' My vlan trunk is on the 'in' side of the network, and set as in.2, in.3 ... The

Hi, Are there any other forums on R where I can get quick responses to my questions? I've lot of questions as I am learning the basics and exploring advanced computational functions and it is tough to wait for moderator approval then a reply to each of those questions. thanks! Samit -- View this message in context: http://r.789695.n4.nabble.com/R-forum-tp2298103p2298103.html Sent from the R

Hi, I'm using Vlans in my network as a way of preventing pier to pier communication - I only want nodes in the network to talk to the gateway (a linux box). I have successfully set up lots of sub interfaces using the vconfig too, one for each vlan. What I would like to be able to do is remove the ip address from each of these subinterfaces eth0.x and bridge them to eth0. I have successfully

With outbound QoS setting in Libvirt XML, libvirt will add a tc ingress qdisc for traffic shaping. Then if you set VLAN tag to that tap device, this qdisc will automatically gone by no reason. Could anyone shed some lights where should I look into? I'm really confused and got no clue here. Thanks! Steps to reproduce -- # virsh start instance-name # virsh dumpxml instance-name ...