similar to: Help needed with HTB

Hello, I''m using these rules (attached) to control traffic going out from ip 192.168.0.100 which is acting as a p2p server, but when I have these rules on and mldonkey running I experience some latency in web pages, which Iwould like to eliminate. I''ve read that this is where the burst and cburst (even quantum) parameters are useful, but I still can''t understand

Hello, there''s a problem I''ve had for several months now, and I''ve never been able to find an answer to it. I''ll try to explain as quick as possible: I have a server that controlls my home network, it provides internet to them also (NAT) and I would like to provide QoS by shaping traffic. I have a p2p server here (running mldonkey), since only that

Hi, I''m a complete newbie at this traffic shaping / QoS stuff so please excuse me if this is a silly question. I''ve searched and searched on Google and I just end up confusing myself even more, so I thought I''d post my question to this list and see whether someone can help me! Basically, I am running a Linux box as a NAT router on my home network (machine name marvin).

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

Hello, I''ve been trying to shape the bittorrent traffic (on my external interface, upload), but without luck, for this I''m using layer7 filter right now, but I''ve also tried ipp2p, with the same results, I might say that this is not a problem with this packet classifiers, the problem is with HTB, here''s why. When I open azureus (the bittorrent client I

Hello, after spending several hours reading archives, I decided to write new post. I successfully set up packet classification, made some basic HTB setup, made some simple graphical representation from HTB statistics data... BUT, I cannot figure out how to refine HTB to get this behaviour: I need that class "p2p" should be the last one to get some link capacity. If I set both RATE

Ok, earlier I post a message explaining my problem with HTB and layer7 (or ipp2p), about not being able to shape the traffic. Well, actually this is what''s happening, I''m marking the packets (right now, I''m using ipp2p as Klaus adviced me to) with iptables, and my queue rules are made using tcng, I''m using the HTB qdisc, and traffic is going to the HTB class

Hello, some days ago, I was asking for help here about not able to do anything when I had bittorrent running, I will post the problem here: I''m using ipp2p to mark p2p packets, and then send them with -j CLASSIFY to the correct HTB class, I see traffic in the class when I start azurerus, and traffic does get shaped, but then I''m still not able to surf the web nor chat nor

Hello, I'm running centos5. I'm wanting this machine only, none of my other ones, to participate in p2p file sharing, bittorrent, edonkey, maybe other networks. Does anyone have a howto or step by step guide for this? I've installed bittorrent and mldonkey clients, but neither is working, i'm assuming gateway firewall issue, but i've enabled the correct ports, 6881

Hello, Could somebody explain following issue ? I set up htb class on outgoing external interface to shape p2p upload traffic. I limited it to 4Mbit/s. I also set up iptables counters chains in FORWARD chain to calculate traffic generated by p2p and others. While tc stats show that p2p shaping class keep defined 4Mbit traffic, iptables counters show me that p2p traffic exceed traffic to 150%

Hello. I have a strange problem with HTB. The configuration is: tc qdisc add dev eth0 root handle 1: htb default 12 r2q 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 78kbit ceil 78kbit burst 3K cburst 3K tc class add dev eth0 parent 1:1 classid 1:10 htb rate 30kbit ceil 78kbit prio 0 burst 3K cburst 3K tc class add dev eth0 parent 1:1 classid 1:11 htb rate 16kbit ceil 78kbit prio 1 tc

Hello, it''s me again, finally p2p traffic is getting shaped, but now I still have one problem: download seems to be affected when shaping the traffic, ack packets are in the interactive queue too, as someone adviced me, what fixed the problem was to change the rates, to match (the sum of all subclasses) the root class rate, and to give the p2p class a very low rate (1k actually) and

Hello! I have a quite complicated setup. In my network on each interface there is bandwidth limitation for each user. Booth outgoing (on interface itself) and incoming (attached IMQ) traffic. There is main HTB class which limits bandwidth for whole interface and HTB subclasses for each user. Filtering is done with hashing filters. This setup was working correctly. But now in the network I

Hello list. I''ve configured a very simple script to slow down packets coming from a particular IP Address. I''ve used IPTABLES to mark traffic coming from this IP Address, but it does not appear to be working as expected. Let me first describe my system as maybe what I''m doing is beyond what NETFILTER can do. I have one machine that runs all my servers as

Hi, got a 25/25Mbit connection which is quite stuffed. So I applied htb rules. Uplink: class htb 1:1 root rate 24500Kbit ceil 24500Kbit burst 4661b/8 mpu 0b overhead 0b cburst 4661b/8 mpu 0b overhead 0b level 7 Sent 430600689269 bytes 730147320 pkt (dropped 0, overlimits 0 requeues 0) rate 23057Kbit 5520pps backlog 0b 0p requeues 0 lended: 199673949 borrowed: 0 giants: 0 tokens: -964

Hi, I''m running mldonkey on same box as shorewall. I follow this http://mldonkey.sourceforge.net/ShorewallConfiguration to open ports for edonkey protocol I add in /etc/shorewall/rules: # eDonkey 2000 ACCEPT net $FW tcp 4662 ACCEPT net $FW udp 4666 but I could not connect to any edonkey server. I check logs and notice that udp traffic on port 4666 is still dropped. Jul 8 22:35:57

Hello, I have a serious problem with HTB which I wasn''t able to solve myself. I run a masquerading router with ppp0 as interface to the Internet. Three clients need to share a downstream of 1 MBit, which I want to divide with tc. When I see a packet being forwarded to one of these clients, I give it the appropriate unique mark: iptables -t mangle -A FORWARD -d 192.168.34.141 -j MARK

Hi, I wanted to implement some QOS on my Linux Box with HTB, but after some time spend on the configuration and tests, I still don''t manage to have some correct results. Here are the details : -ROOT 2000 kbits -HIGHPRIO SUBCLASS 50 kbits prio 0 -SUBCLASS1 750 kbits prio 1 -SERVICE1 250 kbits prio 1

Hi, I''m really new to traffic shaping and try to implement the wshaper.htb script. I have a linux box that serves as vdr, mldonkey, samba, apache and mailserver (imap), connected to my LAN with 100mbit. I''m connected to the inet via adsl with a hardware router/firewall, got 384k downlink 64k uplink. When I have mldonkey running, imap (via Outlook) gets *very* slow (mails with

I have a router with about 300 clients connecting to it. It has htb with a class per client. I wnat to create a script to prioritise www trafic and ssh trafic over p2p trafic.... this is a sample of what i have now: /sbin/tc class add dev eth0 parent 1:5 classid 1:8012 htb rate 35Kbit ceil 281Kbit prio 6 /sbin/tc qdisc add dev eth0 parent 1:8012 handle 8012 sfq perturb 8 /sbin/tc filter add