similar to: QoS IP precedence and Diffserv combination

Hi i have configured my server with cbq and gred. The problem is that the cbq doesnt drop packets. The cbq is configured at a rate of 500Kbit "qdisc cbq 4: rate 500000bit (bounded,isolated) prio no-transmit Sent 100103048 bytes 73933 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 24000 undertime 0 " The traffic that being generated is more than 5Mbit with the

Hi, I am trying to get assured forwarding/expedited forwarding with gred and htb working. Below is the script I am using. The following steps are what I thing is how the script works. My problem is that if I remove the HTB qdisc from the script and have the GREDS parent as the dsmark it works, but when I add the htb as a parent of GRED and DSmark the parent of htb it does not work? Any

Hello all, Please could someone help me with this, I have been trying for days to get this to work. I would like to have BE, AF & EF classes with HTB qdisc. I can''t find any scripts online where this has been done. If I enable this filter: #tc filter add dev eth0 parent 2:0 protocol ip prio 1 \ #tcindex mask 0xf0 shift 4 pass_on then BE & AF classification seems to be fine but

Hi, I am tring to setup AF on my router using GRED/HTB. I plan to mark and set the DSCP with iptables and the ingress qdisc to set the tc_index for the proper GRED vq(1-12). My question is: Is there a way to allow for priority between the af classes and within the af classes? also would it be possible to to the following: HTB(6Mb) | GRED(1)grio HTB1 (af1) (1MB) GRED(1-3)grio |

Hi, I am trying to implement a simple scaled-down version of the AF traffic class type. As such I basically want to remark non-conforming AF11 packets to AF13. Here is m script that I have been using on the ingress router of my network: ---------------------------------------- Link=''dev eth1'' Rate1=''rate 800Kbit'' Rate2=''rate 2500Kbit''

Im experimenting with using a Linux machine with 3 interfaces to operate as a core router. All links and network interfaces are 100mbit. Below is a ascii diagram of the network. (network A) edge router ------>core router---->edge router (network C) ^ | | edge router (network B) I have tried two

I''m successfully using HTB + GRED to shape traffic based on the DSCP field. I would like to strip the DSCP and possibly replace it with normal ToS bits on egress traffic leaving my network. Leaving DSCP set is pointless, and could potentially cause problems with some ISPs that use DSCP internally I suppose. Setting ToS bits would seem ideal as most networks still honor it to varying

I ''ve been trynig for a long time now to make HTB and GRED to work togethen. The problem beeing that GRED doesn''t use handles (instead it uses DP:1 DP:2 etc) i can not preperly filter traffic to them. Tomas Graf suggested to use the tc_index index of u32 classifier so dear Sant .. i am currently with the following scripts that works! But when i try to add an HTB before the

Hi all, Supposedly my router is itself streaming traffic to clients. Is it possible for it to mark its packets before going through dsmark?? I have gone through the examples in iproute2/examples, i noticed that there''s always an ingress and egress of which these are 2 different dev. Is it possible for before ingress and egress be the same dev?? I tried the script below but

Hi stef and all I want measure the policy perfomance for video traffic on mpls diffserv network. there are two different polices for video packet 1. Video packets that are marked that are over the limit are to be rejected at the edge router. 2. Video packets that are marked that are over the limit are to be downgraded as best effort and are sent through. Before video enter my mpls

Hello, I have the following proplem. My DiffServ configuration is working fine when I do ping, but when I use mgen the packets are not detected at the core router. Here is my core router configuration: #!/bin/bash tc qdisc add dev eth1 handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev eth1 parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev eth1 parent

Hi folks I have created a script file (dsmark+policing.sh attached) to check graphic an text outputs of simutations, against original examples/dsmark+policing coding (see TCNG Reference Manual-pg.90). It uses tcng coding (*.tcsim file attached) and old tc coding (*.tcsim_old file attached) inserted in tcsim files. Observation 1: The graphic outputs from (*.tc included in *.tcsim) and (*.tc_old

Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From: Flechsenhaar, Jon J Sent: Wednesday, September 27, 2006 10:30 AM To: lartc@mailman.ds9a.nl Subject: FW: [LARTC] 2.6.14 - HTB/SFQ QoS broken? Please see below Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -----Original Message----- From:

hi all i am a new commer of linux community. i want to how does skb->tcindex value change exactly. it confused me indeed. i have a script reads: (1) tc qdisc add dev eth0 root handle 1:0 dsmark indices 64 default_index 0x161 set_tc_index (2) tc filter add dev eth0 parent 1:0 protocol all prio 1 tcindex mask 0xfc shift 2 pass_on (3) tc filter add dev eth0 parent 1:0 prio 1 handle 0x0a

Hi, There is some extra information in this email! I am working on implementing Diffserv on linux project. I am using suse 8.0 professional kernel 2.4.21. I have the following RPM:iproute2-2.4.7-697.rpm This supports a number of linux qdisc like cbq, htb among many others but it has no support for DSMARK, which I wish to use. Does anyone know of any patch that I could used or any other solution

I want to set the DSCP field of the incoming packets. And then put them in the correct queues. I can mark the packets: iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1 tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8 tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw

Hi guys, I am working on implementing Diffserv on linux project. I am using suse 8.0 professional kernel 2.4.21. I have the following RPM:iproute2-2.4.7-697.rpm This supports a number of linux qdisc like cbq, htb among many others but it has no support for DSMARK, which I wish to use. Does anyone know of any patch that I could used or any other solution so that use of dsmark is possible. Traffic

Hi I am encountering what I suspect to be a bug in the kernel processing of tc netlink messages: I am using kernel version 2.4.9 with iproute2-current-001007 package. Everything works fine in the kernel. Now I open a netlink socket with a user process, read the tc netlink messages generated by the tc process and parse them. What I see is that the kernel has already processed the messages

hai all i need to implement CBWFQ in linux As i wrote script in edge as: which mark the EF traffic ____________________________________________________________________-__ #!/bin/sh DEV=eth0 tc qdisc add dev $DEV handle 1: root dsmark indices 8 tc class change dev $DEV classid 1:1 dsmark mask 0x3 value 0xb8 # making two filters tc filter add dev $DEV parent 1:0 prio 4 protocol ip u32 tc

Hi, I want to setup core routers to do both DSCP marking and to get the DSCP and forward packets based on DS field. I don''t want to separate DSCP marking to be done only at the edge routers. I know that dsmark is both used for DSCP marking and for getting the DSCP and forwarding packets according to DSCPs. In my case, since I want to do both of these I need two dsmarks.(?) I am not