similar to: Brige + Firewall + Squid problem

Hi All, I''ve configured a mutlipath as detailed in the HOWTO. For the most part it''s great, but when the cheap DSL line drops it''s connection, as it regularly does, the outbound routing doesn''t automatically use the remaining path for internal outbound traffic. Ip route show lists no default route once the default path dies, and if the ppp connection is

Hi. I'm in desperate need of some good advice. I have a tinc network with 16 nodes. It's a star topology where all nodes are connecting to the one node (Node1) that have a static IP. Node 1 accepts incomming connections Node 2 through 16 connects to Node1 One of the nodes (Node5) stopped working a while ago (2 - 3 weeks or so), other than that everything was working fine. Today I

Hello all, I need to put an IP alias to the same ethernet card, like this: eth0 - IP1/MASK1/BROADCAST1 eth0:1 - IP2/MASK2/BROADCAST2 In this box I will have another card that conects to a LAN netowork. I need this two alias in eth0 becouse I have two routes do take, but it seens to do not work. This is the script I am using (this scripts works fine when I have two ethernet cards

Hi, I configured a router box to use 2 providers, as described in the HOWTO. (Apendix 1) I want to use both links to reach a single smtp server. As I read in the kptd and in some old messages of this list, doing a SNAT in the postrouting chain comes _after_ the routing desision. So I guess the following lines I''m trying to use are wrong. (See Apendix 1) What can I do to have multiple

Hey, I''m trying to set up a Gentoo box to replace an aging BSD box here. The BSD box is running packet filter and I have it set up to take all data and route it to one of six sattelites. I have come up with the following config, but unfortunately I have no real way to test it short of switching the satellites over to the new system and prayer. The setup is: 192.168.252/22 - The LAN

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I''m trying to setup a central IPSEC-Gateway with several ipsec tunnels. Some are to be routed over one leased line, some over the other leased line. Both leased lines have their own public ip adress. The setup looks kinda like this: eth1(ipsec0)--ISP0--Internet--eth1-Linux1-eth0--Subnet1 /

Hello Im having a problem similar to sawar Here is my configuration --------------eth1---192.168.1.128---------- -------------192.168.1.1 ISP router 1 | my | ---Eth0---192.168.10.157----| | | linux |

Hi, I have a little problem to setup iproute in my network It looks like this: ---- ----- ------ R1 R2 R3 ---- ----- ------ | | | | | | ------------------------------- ETH1 ETH2 ETH3 ETH0 ETH4 -------------> DMZ ------------------------------ | |

Hi William. Thanks a lot for your help. Im having some trouble recompiling my kernel after a installed the patch. Im running RH 7.3 with kernel 2.4.18-3. The patch I installed is routes-2.4.16-6.diff. I got no errors installing it. I added the multipath support, and recompiled it. The make dep and the make bzImage went fine. I got error during the make modules. These are the errors:

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip

Hi Everybody in the list I have a situation like this ------ (IP1) linux |----eth0.40------ | router | | | box | (IP2) |------|Client Router ( Destiantion Net DNET) |----eth0.41------ | | /27 subnet ------ I just want to balance the load of bandwidth per packet based between the two vlan interfaces to Client Destination network

On 23/07/2020 15:46, Jerry Geis wrote: Hi Jerry, See below, inline, for some comments. > I have a simple script: > #!/bin/bash > # > index=0 > total=0 > names=() > ip=() > while read -r LINE > do > NODENAME=` echo $LINE | cut -f 1 -d ','` NODENAME=$(cut -d, -f1 <<< $LINE) Notes: use $( instead of backticks. There's no need to quote the

Hi All, I''m a big user of the LARTC document but am currently stuck with a question around section 4.2 (http://lartc.org/howto/lartc.rpdb.multiple-links.html) in relation to "Routing for multiple uplinks/providers". I''m wanting to do a similar setup to the diagram where I have - lets just say for the moment - two uplink providers where I want to route over two

from ip1=192.168.222.96 and ip2=192.168.22.96 user zvn2 receive test in list, hosts allow = 192.168.222.96 in config for share test and global access based share enum = Yes, but I need share test in list only from ip1=192.168.222.96 when ip1=192.168.222.96 $ smbclient -L 192.168.22.135 --use-kerberos=off -U zvn2%pppppppp -W . ?? ?Sharename?????? Type????? Comment ?? ?---------??????

I need to set up following network architecture : Internet ^ +-----------------+ | +------------------+ | Centos6-1 | | | Centos6-2 | | +---- eth0 + ----+ | | | (br0)| | | | | +---- eth1 +----------------+

Hi everyone, I need your help. I would like to create a front-back architecture with Xen. My physical server has only one public Interface. Currently, my DOM0 is using the network-route configuration: *(network-script ''network-route netdev=eth0'') (vif-script vif-route)* My DOM1 is configured with a public IP + proxy_arp with DOM0. DOM1 can connect any address on

Hello folks: This may have been discussed many times before but I have not been able to find it. I have also not been able to resolve it myself so I am asking here with hope that someone can straighten me out. I am using ip to do multisource policy routing or two connections to the internet. I have a linksys wrt54gs route which connects two machines by wire through the switch and three

Hello, I am trying to make a load balance at my box using two conections. I have compile my kernel with this patch routes-2.6.13-12.diff (tha I get from this website: http://www.linuxvirtualserver.org/~julian/#routes). The problem is that when I try to balance using weight sintaxe (i will put the script bellow) some conectios just drop. So I can enter some pages but other I could not...

Hello all, I have a linux router with 2 interfaces(eth0 - ISP and eth1 - LAN). I''ve established a VPN connection(openvpn) over eth0 with a friend of mine => tun0 interface. I want half of my LAN to have Internet access through the eth0 interface and the other half through the tun0 interface. I''ve set up a script like the "load balancing split access" instructions

Hi guys, I have a mail server running qmail with two network interfaces. All packages comes from the first one and I want to mark outgoing packages to route them using the second interface (ADSL). I have write this script, but it ins''t work. All packages are returning by the first interface... :-( x-x-x # Tables, networks, interfaces, addresses and gateways IF1=eth0 T1=100