similar to: Questions about mutiple providers

Hi, I have a linux box which balances load between two interfaces ( say WAN1 and WAN2). I have masquerading on for any request coming from LAN to the outside world. The setup is in such a way that WAN1 drops packets with source ip belonging to WAN2''s network and viceversa. For some strange reason, I find that packet coming out from the WAN interface has source address of WAN2 and

I am developing load balancing router, But I have a question about fail over. The follow diagram is my test environment and scripts. ------------------------------------------------------------------- Environment Setting PC1(192.168.10.2) | (LAN) | PC2-eth2(192.168.10.1) +

Hello, I have set up a multipath gateway. System is a linux 2.4.29 kernel, iproute 20010824, iptables 1.2.11. here is the setup: firewall:/# ip rule 0: from all lookup local 100: from all lookup main 152: from all fwmark 10 lookup wan1 153: from all fwmark 20 lookup wan2 201: from 213.223.96.121 lookup wan1 202: from 82.236.230.217 lookup wan2 1000: from

I have tried to read the documentation, but I was not able to find a clear solution to my problem. I run Samba 3.0.14a on a Debian system with Posix ACLs. I have a share on a file system that uses Posix ACLs, and I have two directories in that share. Both directories have default ACLs set, so that every new file (or directory) created under each directory (by Windows XP/2000 clients)

I have Samba PDC and use tdbsam backend. I use the version 3.0.11, but recently I have exchanged it for the version 3.0.23c. Now I have a number of problem. Here is one of then. I wish to move one user "gad" from Domain Users (RID 513) to Domain Guests (RID 514). Now Primary group of user "gad" is "Domain Users": pdbedit -Lv gad -d0 Unix username: gad NT

Hello, i have had a terribe day today, why? because i have been so 4 or 5 hours trying to do work this and i have not finished it. I feel very pleased if anything can help me. I have two isp connections: eth0: dhcp ip1: 82.198.*.* gw1: 82.198.*.* and a router adsl in ip 192.168.0.253: eth1: static ip2: 192.168.0.254 gw1: 192.168.0.253 the same machine has 3 more networks cards but i am

Hello samba, I have an issue with OpenVPN 2.0 and Samba 3.0.14a. My setup consists in a routed VPN (thus server and clients are on different subnets) between a linux OpenVPN 2.0 server and some Windows 2000 VPN clients. Samba is the PDC and is a WINS server. The VPN clients work, broswing works, and I see the clients registering on the server's WINS in

I am looking for some way to grant or deny internet access (that is, changing iptables rules) based on Samba domain logon. When a user logs on, I would like to run a script that modifies firewall rules based on the group that the user belongs to (this determines if he has internet access or not) and based on the workstation's IP address (so I know which IP address to grant internet access

Background: WAN1 - Fixed IP low latency, low jitter WAN2 - Fixed IP medium latency, higher jitter than I like for good VoIP Firewall/Router not SIP aware NATed LAN Asterisk on server located on LAN. Most, but not all ATA/IP phones on LAN In the past I was running a v1.2 Asterisk which acted as a B2BUA (all RTP streams relayed through Asterisk server) thus presenting only one SIP device to the

Hi Tom (and others) encase you don''t know my network already ;) here''s a quick run down eth0 lan 192.168.1.1/255.255.255.0 eth1 wan1 172.30.7.4/255.255.240.0 eth2 wan2 202.37.230.93/255.255.255.192 eth3 wan3 203.96.213.73/255.255.254.0 I''ve got routes and rules for all the above interfaces :) I want to add another one, however I fear this might cause some issues I have

Ok folks, here goes.. I have been boggling with a problem for the past week, and still haven''t found a solution.. I''m trying to route traffic from two providers through a Linux machine. But that is not the problem. The ISP''s have provided me with a WAN IP class for both of the lines, to be routed into a DMZ where the machines a to respond to their respective

I'd like to set up my samba 2.2.8a server to serve printer drivers to clients when needed. I have set up the print$ share, in which I still have no drivers. Tried adding drivers from a win2000 workstation by using "server properties" command, I can't add anything since all buttons are greyed out. The user I am using is in the printer admin group in smb.conf. I

I have tried using iptraf for my NAT firewall to analyse the IP traffic. Basically I am faced with this difficulty of related the source IP to the outgoing interface to the internet, so I am wondering if anyone has a suggestion for a different ways to do it, or a suggestion for a better tool. Details :- Supposed : eth0 - LAN eth1 - WAN1 eth2 - WAN2 And then

Hi all, I''ve been using shorewall 3 (3.4.8 now) for a while on a simple gateway setup for my office. Routing is enabled only for a few hosts and all user access the internet thru squid, which is running on the shorewall box. I have a few other services on this box and some others on another server, but they don''t matter for what I need. Quick and dirty schematics to illustrate

Hello, I''m trying to setup an 8 port wan configuration (pptp+pppoe) with one vlan trunk. My internal networks are : LAN(eth9): 10.0.0.0/16 VLAN10(eth9) 10.10.0.0/24 VLAN20(eth9) 10.20.0.0/24 VLAN30(eth9) 10.30.0.0/24 VLAN100(eth9) 10.100.0.0/24 I would like to post my configuration here since i don''t success to do the following: 1. Communicate between VLANxx to LAN

Hi There is a Centos 7 up-to-date box with 2 interfaces, let's say 192.168.1.12 - enp2s0, 192.168.1.13 on enp3s0. Default gateway on enp2s0. The gateway is pfsense, IP is 192.168.1.1 with 2 WAN connections On the gateway the outgoing traffic is routed by source ip to different WAN, 192.168.1.12 to WAN1 and 192.168.1.13 to WAN2 On the centos box are set all the route and routing rules:

I am currently planning "half a migration" (and half a new configuration) from NT to Samba PDC, and I would like to have some help. I have read the howto and I have understood something useful, but I also understood that I don't know enough of Samba domain internals to be sure not to make terrible mistakes. I currently have a NT4 PDC that also shares files and

I have installed lots of samba 3 servers as PDCs for little networks serving 10 users or so. I have always set up the user "root" as the domain administrator, by setting its group SID to <domainSID>-512 with pdbedit. My "root" user has usually a user SID of <domainSID>-1000 since it is the first user I add to Samba. I have never set up a username map

Hi all, I''ve a routing problem. I''m setting up a router based on debian (kernel 2.4). I need to setup routing to export an ftp service (ftp server is in dmz) to 2 wan (both). I setup prerouting ad forward rule with no problem. The problem is that reply packet use default gateway (default wan) even though they are enter using the other wan. I solved it marking packets in input

Hello Stephan, Monday, June 13, 2005, 12:58:54 PM, you wrote: SH> I am struggeling around with the permissions of the recycle-vfs-module. SH> While working mostly good( placing deleted files inside the .recycle- SH> folder), the touch-option does not work. I am experiencing the same problem. The recycle vfs module is quite buggy, IMHO. The touch option does not seem to work,